just wondering if there's a way i can make the Radio buttons and check-boxes in my forms select-able by hitting enter? My form is quite long and it takes too much time for users to always have to grab the mouse and click the box, if they could just tab to the radio box or check box and hit enter to select it it would be awesome!
View 2 RepliesI was viewing this thread here: [URL] ...
How to add checkboxes and radio buttons.
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
I've got a small problem with radio buttons. I've been asked to add a few to a sheet we use at work, problem I'm having is when I add these new buttons from the forms toolbar and then assign the cell link for them some of the other radio buttons on the sheet asume the cell link of the new buttons and when I change them back the cell link for the new buttons change ? i could understand this problem if I had maybe copied them and modified the copies perhaps but that isn't the case.
View 2 Replies View RelatedI am having around 80 - 90 radio buttons in my excel page for filling up the forms, but each time i need to give this to a new user i have to reset all the buttons manually, is there any way where in i can do this in one go and all the radio buttons are reset at once without me doing this manually.
View 9 Replies View RelatedWhat code do I need to have behind a command button to carry out an action (for example select cell A1 or B1) depending on which one of two radio buttons are selected? I have tried:
Sub Button23_Click()
If Opt1 Then
Range("A1").Select
End If
End Sub
I have inherited a spreadsheet that has a text box and a radio form that I cannot delete for the life of me. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the others?
View 1 Replies View RelatedI am creating scorecards for our company and ratings are inputted using radio buttons (form control). I have a "clear" macro that clears all fields and radio button values (none is ticket). This macro is called throughout different sheets, as different roles in the company have different KPIs and should be on different sheets. I need a code that detects all radio buttons within a certain sheet and clear their values. I cannot put specific radio button names, as I have a lot.
View 2 Replies View RelatedI need to filter data from row 87 downwards depending on the choices above. Some of the choices could be only one like in the measurement type. That I can take care of but what if the choice is more than one, it could be four and it is not fixed. Is that possible in autofilter? This is when they go to checkboxes where they may have many option. The mounting part is best example of many options. This is the part I can't incorporate to macro. It's somoething dynamic. I can't make my filter autoadjust. So essentially,I wanted to automatically edit the filtering based on those 10 criteria, which is also in ten different columns.Sample work.xlsm
View 1 Replies View RelatedI have inherited a spreadsheet that has a text box and a radio form that I cannot delete. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the text box and reject radio button?
View 2 Replies View RelatedI have a pair of radio buttons on an Excel 2007 sheet. I want the buttons to be clickable, but have the sheet protected.
Both are defined as unlocked. The Group containing the two buttons is also defined as unlocked.
But when I protect the sheet, one of the two buttons gets the pop-up saying the cell is protected - the other button is fine. I've even tried unlocking the cells behind the buttons, but it still pops up.
I created two radio buttons on a spreadsheet where a user can select
one button for Yes and the other for No. When I right click these
buttons, I notice the names (shown on the left hand side of the
formula bar) are:
Option Button 3 (for No)
Option Button 4 (for Yes)
I'd like to create a macro that automatically selects the Yes or No
button depending on a cell value in another tab. If the cell value is
1, the macro should select Yes. If the value is 0 the macro should
select No.
I tried running the macro below:
Sub testSelectYesOrNo()
If Not IsEmpty(Sheets("Sheet2").Range("A1").Value) Then
Select Case Sheets("Sheet2").Range("A1").Value
Case Is = 1
Sheets("Sheet1").OptionButton4 = True
Case Is = 0
Sheets("Sheet1").OptionButton3 = True
End Select
End If
End Sub
But when this runs I get a "Run-time error 438 Object doesn't support this property or method"
When I click debug, the text "Sheets("Sheet1").OptionButton4 = True"
was highlighted.
I work in the science field and I'm trying to record an observation with some codes within a template. I have 5 different codes (A-E) to choose from and want to display the code that the person has chosen for each of the 6 compounds they are working with.
I started creating these command radio buttons with some code to display the results in part particular cell, but I would need to do this 30 times linking each group together to get what I want. I know there's an easier way to do this but ....
I am trying to make a basic worksheet that will have radio buttons. I have searched around for about 2 hours and can not find any documentation on how exactly to create a buttons and make it do what I want. I have also tried F1 in Excel but that hasn't helped any either. I did stumble uppon a file called "Options.xls" when searching this forum but it does not explain how the buttons were made. The only thing i can figure out how to do is basically insert a button onto the document, and rename the label of the button that's about it. I basically want to create a group of (3) or so buttons. If button A is picked, cell D1 will display "x". If button B is picked, cell D1 will display "y", and so on. Is there a link to an example out there that shows how to create and use buttons?
View 2 Replies View Relatedby using radio buttons or checkbox, or anything similar. Based on the answer, I would like cells to appear below the question, for example in B3 another question would be "how many guests would you like to invite?" and B2 would be their answer but is preset to "0"
View 3 Replies View RelatedI'd like to insert some radio buttons in a worksheet that activate a hyperlink to a web page and then be able to go back to where I started (ie the radio button)
I can link the button to a macro which was a recording of clicking on a hyperlink. The trouble is when I hit the return arrow to return to the sheet from the web page I go back to the location of the hyperlink not where I started from.
Is there a way to do this with the buttons.
If I can rearrange the sheet to allow for more narrow columns I may be able to just use the hyperlink friendly name argument and do it that way but I'm not so sure I can insert more narrow columns without messing up the layout of the whole sheet. With a button I can float several of them over an area regardless of the width of the columns.
every week i send out a pivot table to different project co-ordinators and would like a way of having simple option button so that they can have the data by "hours" or "costs" and can use tick boxes for the row fields they want to show, for example, "profession", "workstage"," name","cost rate". The page field will always be "Project" and the Column Field will always be "Period" and " Date"
I then want the pivot table to change automatically to their choices. I am pretty basic with VBA so may need explanantions too. It would save me sending out 10 versions of a pivot table all feeding off the same data! They could actually do something themselves! (i know they could drag the fileds they want into the areas they need them but trust me when i say they are not that advanced, they are good at ticking!!)
I'm trying to create a form using radio buttons from the "Forms Tool Bar" and not sure I shouldn't be using the "Control Tool Bar"
I've got multiple buttons and wanted to group them so i used the "Group Box" from the Forms tool bar but now there's a box around the buttons (I've turned off Printing for the box) that gets in the way of other text on sheet. I did some searching and thought I read where you could also use the drawing tool bar and draw a rectangle around the buttons which would then let them operate independent of other groups of buttons but that doesn't seem to work so I'm guessing I imagined it. I also noticed that if you don't draw the "Group Box" around the hole radio button box, they don't work with others in the same "Group Box"
I'm not sure if I should use the buttons in the "Control Tool Bar" but I'm thinking I should so that I have the flexibility should I decide to do something different in the future. I'm thinking about using the buttons to hide a sheet as well as select the sheet for printing, but for now one hurdle at a time.
Lastly I tried looking up some information on how to get the "Control Tool Bar" radio button to behave similar to the "Forms" version of the button (i.e. click the button and it appears to alternate from other buttons in the group), however when I place my mouse over the button it selects it rather than letting me change it's state from true to false.
I have a userform with a lot of OptionButtonson it.
(a few pages on the userform * a lot of OptionButtons per page = a lot lot OptionButtons)
I need to change them all to checkboxes ... Is that possible? For example:
Code:
Dim oCnt As Controls
For Each oCnt In myform.Controls
If TypeOf oCnt Is msforms.OptionButton Then
TypeOf oCnt = msforms.CheckBox
End If
Next
Syntax error in line: TypeOf oCnt = msforms.CheckBox
But I always have an error.
When I select the binoculers by project the window we are disucssing with the radio button comes up (after the project number is added and sendkey to select filter - only shows one radio button). Attached is the source code of the original window and a snapshot of what it looks like.
First window - I currently have the code going to the project area (where we cannot type anything) then using sendkey to tab and enter to select the binoculers.
New window - only one radio button shows after you type a project number than hit filter.
First Window.xlsm
Original Window source code.txt
new window.xlsx
New window radio source code.txt
I am looking at designing a simple radio button system which allows me to fill an adjacent cell with values from a certain column - so in the example, column C is the total value, and columns D-F will ideally have a radio button which a user can just click to select the value.
View 4 Replies View RelatedI have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
I'm trying to select 1 out of 9 checkboxes on one sheet, first checkbox located in Cell#I22 and when it's selected, I would like it's name ("ROC") of that checkbox to appear on second worksheet in cell # I23.
View 3 Replies View RelatedI have several checkboxes in a form and the program will run different macros depending on what the user chooses. There are 9 checkboxes total. 1 checkbox activates all other checkboxes while the other eight are the options. If a user clicks the All checkbox, the other 8 are activated. If All is unchecked, the other 8 are unchecked. The trick is that I want the All checkbox to change to False if any of the 8 options are triggered to False. The problem I am having with the code I have is that if I trigger any of the options to False, the chkAll macro kicks in and turns all of the checkboxes to False, not just chkAll. Somehow, I've tried using the Change and the Click event with chkAll but it seems to be behaving the same using one or the other. I have pasted the code below as well as included an attachment of the file with the form.
Private Sub chkAcq_Click()
If chkAcq.Value = False Then
chkAll.Value = False
End If
End Sub
Private Sub chkAdmin_Click()
If chkAdmin.Value = False Then
chkAll.Value = False
End If
End Sub.........................
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View RelatedI need to get the code for a "copy" command button and "select all" command button. I need both for a text box.
Scenario: I click on the "select all" command button, it selects whatever is in the text box and then the "copy" command button copies all of that. So then I would be able to paste that in another program.
I have made a simple procedure (which will extend to make something that I have to make but for time being) it asks user to select a chart type in a userform using option buttons and then the chosen chart type is taken as the chart type and makes the chart.
problem is that the typechart - variable to identify the chosen chart type - is not being recognised. Here's the coding, the variable is not passed (in yellow bolded) from one procedure to another?
Private Sub NextButton_Click()
Call ShowType
If bFlag = False Then
MsgBox "Not Selected"
Call ShowType
Else
Call MakeChart
End If
End Sub
I have a column of dates that are not being recognized as dates unless if I manually select each cell and press enter. For example the cell value is "Jul/13' and isn't recognized as "01/06/2013" until I select it and hit enter. How can I get around this?
View 8 Replies View RelatedI have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
If MonthView control can be set to allow users to select multiple ranges and enter different dates into those ranges? I know I was able to do with with the previous Datepicker control and I thought it was as easy as setting the Show Modal property to true.
View 1 Replies View Related