If the user selects French (radio button selection), I want to swap out the existing English text for French and vice versa. One large text box with several paragraphs. Can Excel do this?
View 2 RepliesI have a Userform (frmData) with 4 CommandButtons (Cmd1, Cmd2 etc) and also 2 RadioButtons (Opt1 & Opt2).
I want Opt1 to be the default selection when frmData is opened.
If Opt1 or Opt2 is selected I want that option to stay selected until frmData is closed.
When Cmd1 is selected code1 runs if Opt1 is ticked, and Code2 if Opt2 is selected.
I have a userform that has 3 option buttons (1, 2 & 3) each of these option buttons have a Label next to them, Label (1, 2,& 3) next to that I have 3 textboxes that are formatted for currency. Each label represents a dollar value $10.00, $20.00 & $30.00
OptionButtom Label TextBox
1 Month Member x $10.00 $.00
2 Month Member x $20.00 $.00
3 Month Member x$30.00 $.00
When one of the OptionButtons is selected I want the corresponding label dollar value to be multiplied by the OptionButton and that value placed in the TextBox
i.e. if OptionButton 1 is select the TextBox would have a value of $10.00
if OptionButton 2 is selected then TextBox would have a value of $40.00
if OptionButton 3 is selected then TextBox would have a value of $90.00
Lastly, if 1 Option Button is selected and then changed to another of the 2 buttons, the TextBox value would reset to $.00
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
I have a drop-down list with 3 values:
A
B
C
The list is generated from a table, which is hidden, like so:
Column 1 - Column 2
A - Text1
B - Text2
C - Text3
Now I want to have a very simple function that will allow me to COPY the text from Column 2 based on the selection from the drop-down list. For example, when the user selects "B" from the drop-down list, I want the text "Text2" to be copied to a specific cell.
I have inherited a spreadsheet that has a text box and a radio form that I cannot delete for the life of me. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the others?
View 1 Replies View RelatedI want to populate the values of two textboxes that we will call TextBox5 and TextBox6 from columns W and X of a spreadsheet called "PowerAnalysis" when a selection is made form ComboBox5.
The ComboBox5 works perfectly now. I just need it to populate the other two text boxes.
All the data resides in the same row on the same sheet of PowerAnalysis when the selection is made in ComboBox5.
I hope I have been able to give a clear picture of what I am wanting to do.
I have a spreadsheet which contains our fleet information covering many vehicles in one list. The teams for these vehicles are listed in Column A. What I would like to have is:
A dropdown box to pick from All, or the various teams in A1To hide every row that doesn't match the selection of A1To reveal every row that contains the selection for A1 at any point in column A. e.g: "*Dog Team*"
This is because something might be listed as "Moved from Dog Team" or "Dog Team, temporarily on loan", or "Dog Team V66.m"
I have taken a small sample of the data I will be working from and made a very simple drop down box which displays the pages of information for the vehicles by hiding/unhiding blocks of columns:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Range("A2") = "MOT/Service" Then
ActiveSheet.Columns("A:P").EntireColumn.Hidden = False
ActiveSheet.Columns("Q:CE").EntireColumn.Hidden = True
ElseIf Range("A2") = "Contact Details" Then
[Code]....
But because there is also filters on the sheet, meaning the positions of the entries based on rows can change, I need it to search for the "*xyzzy*" method, but am unsure how to do this! While just using the Filters will work, due to some human limitations I have been asked to have a specific drop down box in a very specific location with instructions next to it.
I am using the code below to "swap" the selected cell values in a column with the ones to the right of the selection. It works fine on unfiltered sheet, but if I apply an Autofilter, it copies both visible and hidden cells, and I only want to swap visible cells. What to modify?
[Code] .....
1. Search an excel sheet "column" for a particular type of text and insert values based on that text (if found) in another column.
e.g I have column A1 to A10 with different types of text. I would like to search for the keyword "Risk is high" OR "Risk=High" for each cell in the column and insert a "1" if found beside it's corresponding "B" column. If not found, I would like to insert a "0".
So, if the text "Risk is high" OR "Risk=High" was only found in A6, I would like B6 to be "1". Rest of the values in the B column would be "0's", since the text was not found in any of the other cells.
I have a userform and want to disable the command button unless a text box contains text. what I need to do?
View 2 Replies View RelatedI need function that swaps text from side to side. Text at the left of "x" should be placed at the right side of the "x" and from right to left side:
6x15 -> 15x6 plaah plaah xsomething -> somethingxplaah plaah How to do this?
I have a chart that's being updated with different values when I cklick on different radiobuttons. When the cells that the radio button refers to is empty or the calculation in the cell have an error it pops up a message that I need to click OK to go on. Is there a way to stop these alerts by writing a script that shuts the alert messages off during each click?
View 2 Replies View RelatedI'm making a worksheet where the user has the options to select "yes" or "no". I used active x radio buttons because I feel they are more flexible. The problem I'm running in to is, what happens if there is an "unknown"? I can't find a way to "deselect" a radio button?
I tried using 2 checkboxes using the following
Checkbox 1:
If CheckBox2.Value = True Then
CheckBox1.Value = False
End If
Checkbox2:
If CheckBox1.Value = True Then
CheckBox2.Value = False
End If
The problem with this is, you have to deselect one checkbox before you can select the other. It works, but it’s a little more cumbersome then I was hoping. Is there a better solution?
When I select the binoculers by project the window we are disucssing with the radio button comes up (after the project number is added and sendkey to select filter - only shows one radio button). Attached is the source code of the original window and a snapshot of what it looks like.
First window - I currently have the code going to the project area (where we cannot type anything) then using sendkey to tab and enter to select the binoculers.
New window - only one radio button shows after you type a project number than hit filter.
First Window.xlsm
Original Window source code.txt
new window.xlsx
New window radio source code.txt
I am looking at designing a simple radio button system which allows me to fill an adjacent cell with values from a certain column - so in the example, column C is the total value, and columns D-F will ideally have a radio button which a user can just click to select the value.
View 4 Replies View RelatedI have code in my macro that outputs a radio button for every project that is entered into the database. All radio buttons are part of the same group. I know how to give the radio button an caption name but I do not know how to give the radiobutton an actual name that I can call to. How can I do this in excel macros?
View 9 Replies View RelatedI am using the developer tools and have created a set of radio buttons that work fine.
On the same worksheet and tab I have created a second set of radio buttons but all the radio buttons are grouped as the same set.
How do I define the second group as a second group?
VBA code for go to next sheet using radio button.
View 1 Replies View RelatedWithin a worksheet, I have several radio buttons, allowing the user to select only one of them. Using VBA, how do I recognize which radio button the user selected?
View 1 Replies View RelatedI have created a survey in excel 2003. It has 70 questions on it and the user responds to the questions by clicking on a radio button. There are 4 radio buttons within a group box for each question and the user will select one of them.
At the end of 'sheet 1' with all these questions on, i have a button which the user presses to proceed to 'sheet 2'. When they press the button i want to ensure is that all questions have been answered ie: 1 of the radio buttons is selected for every question.
If one of the questions isnt answered then a pop up box will appear to tell the user they have unanswered questions and then the vba code will exit and the user stays on the question sheet (sheet 1). If all the questions are answered then the user will move to 'sheet 2'. (the reference cells for all the groups of radio buttons are within column G on sheet 1).
I have an issue with a combo box and radio button.
Anytime I click on either of them, they reduce in size.
It's as if it is reducing by the same ratio every time until you can't click on it anymore.
I am building a form and want to display (or activate) a drop down list only when an radio button is active. I have 4 radio buttons and want to link to to 4 different drop downs. But only have the drop downs active if the button is clicked.
View 9 Replies View Relatedsee the attached below.
A few things to sort if I may
How do I get the listboxes to pre-populate based on the Userid and Option Button selection? Furthermore, write back to the correct cell once the selection has been made?
How can I get the combobox to remove blanks in the Userid? (if each cell in row2 has to be populated then so be it)
ToolMatrix3.xlsm
I have a form (worksheet with controls embedded in) and the form changes color depending on what the user clicked, problem is that button colors and cell pattern colors don't quite match.
thought I solved it by making the buttons backstyle = transparent.
However, as soon as radio button was clicked, transparency was lost.
I have named the range of the form "FormGround" so that when Service 1 is select, the Form turn a different colour. I have my subsequent buttons change to that same color as well (using the cell's color index number.
how to disable combobox on radio button click in excel macros'
I have 2 radio buttons: optionbutton1 and optionbutton2 and two comboboxes: Combobox1 and Combobox2.If i select 1st radio button 2nd combobox should be disabled.Vise versa
I've got a drop-down menu with four options in it that match up with the cells D11:D14, and next to those I've got spots for counting the totals (E11:E14). Next to the drop-down I've got plus and minus buttons, and I need to make it so if I have the top option selected in the dropdown and press plus, it adds +1 to E11. Second option and the same plus button, +1 to E12, and so on.
The purpose is for a call tracker, the employee would select the reason for the call (maybe more added later) and hit the button to add the call to the report.
I've looked so I know you normally ask for what I've got so far, and that's nothing. I've got all the other buttons wired up but I don't even know where to start with this one. I can include a screenshot if necessary.
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedI'm trying to create a form using radio buttons from the "Forms Tool Bar" and not sure I shouldn't be using the "Control Tool Bar"
I've got multiple buttons and wanted to group them so i used the "Group Box" from the Forms tool bar but now there's a box around the buttons (I've turned off Printing for the box) that gets in the way of other text on sheet. I did some searching and thought I read where you could also use the drawing tool bar and draw a rectangle around the buttons which would then let them operate independent of other groups of buttons but that doesn't seem to work so I'm guessing I imagined it. I also noticed that if you don't draw the "Group Box" around the hole radio button box, they don't work with others in the same "Group Box"
I'm not sure if I should use the buttons in the "Control Tool Bar" but I'm thinking I should so that I have the flexibility should I decide to do something different in the future. I'm thinking about using the buttons to hide a sheet as well as select the sheet for printing, but for now one hurdle at a time.
Lastly I tried looking up some information on how to get the "Control Tool Bar" radio button to behave similar to the "Forms" version of the button (i.e. click the button and it appears to alternate from other buttons in the group), however when I place my mouse over the button it selects it rather than letting me change it's state from true to false.