Radio Buttons Macros Hyperlinks And Moving Back?
Sep 6, 2002
I'd like to insert some radio buttons in a worksheet that activate a hyperlink to a web page and then be able to go back to where I started (ie the radio button)
I can link the button to a macro which was a recording of clicking on a hyperlink. The trouble is when I hit the return arrow to return to the sheet from the web page I go back to the location of the hyperlink not where I started from.
Is there a way to do this with the buttons.
If I can rearrange the sheet to allow for more narrow columns I may be able to just use the hyperlink friendly name argument and do it that way but I'm not so sure I can insert more narrow columns without messing up the layout of the whole sheet. With a button I can float several of them over an area regardless of the width of the columns.
View 1 Replies
ADVERTISEMENT
Sep 10, 2004
I have a setup at the moment where I have a spreadsheet using a bunch of macros that are coded in a module attached to another spreadsheet. In both spreadsheets the macros are tied to Excel buttons placed within worksheets. When I copy the spreadsheets each month to new directories - they're used for some monthly reporting - I see the following behavior:
1/ The spreadsheet that contains the module with the code for the macros correctly updates the location of the macros and works OK.
2/ If I open the other spreadsheet and save it the macros appear in the tools/macro dialog as having changed location OK. However, if I try to use the macros by pressing a button the macros invoked are in the old location. If I check the assignment of the macros in this spreadsheet by right-clicking on a button, indeed the macros invoked are in the old location. This means that I have to go through and manually update for each button the macro invoked.
View 2 Replies
View Related
Feb 10, 2012
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
View 6 Replies
View Related
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
Apr 8, 2009
I've got a small problem with radio buttons. I've been asked to add a few to a sheet we use at work, problem I'm having is when I add these new buttons from the forms toolbar and then assign the cell link for them some of the other radio buttons on the sheet asume the cell link of the new buttons and when I change them back the cell link for the new buttons change ? i could understand this problem if I had maybe copied them and modified the copies perhaps but that isn't the case.
View 2 Replies
View Related
May 5, 2008
I am having around 80 - 90 radio buttons in my excel page for filling up the forms, but each time i need to give this to a new user i have to reset all the buttons manually, is there any way where in i can do this in one go and all the radio buttons are reset at once without me doing this manually.
View 9 Replies
View Related
Feb 16, 2007
What code do I need to have behind a command button to carry out an action (for example select cell A1 or B1) depending on which one of two radio buttons are selected? I have tried:
Sub Button23_Click()
If Opt1 Then
Range("A1").Select
End If
End Sub
View 9 Replies
View Related
Feb 22, 2013
I have inherited a spreadsheet that has a text box and a radio form that I cannot delete for the life of me. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the others?
View 1 Replies
View Related
Feb 25, 2013
I am creating scorecards for our company and ratings are inputted using radio buttons (form control). I have a "clear" macro that clears all fields and radio button values (none is ticket). This macro is called throughout different sheets, as different roles in the company have different KPIs and should be on different sheets. I need a code that detects all radio buttons within a certain sheet and clear their values. I cannot put specific radio button names, as I have a lot.
View 2 Replies
View Related
Feb 18, 2014
I need to filter data from row 87 downwards depending on the choices above. Some of the choices could be only one like in the measurement type. That I can take care of but what if the choice is more than one, it could be four and it is not fixed. Is that possible in autofilter? This is when they go to checkboxes where they may have many option. The mounting part is best example of many options. This is the part I can't incorporate to macro. It's somoething dynamic. I can't make my filter autoadjust. So essentially,I wanted to automatically edit the filtering based on those 10 criteria, which is also in ten different columns.Sample work.xlsm
View 1 Replies
View Related
Feb 22, 2013
I have inherited a spreadsheet that has a text box and a radio form that I cannot delete. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the text box and reject radio button?
View 2 Replies
View Related
Aug 6, 2008
I have a pair of radio buttons on an Excel 2007 sheet. I want the buttons to be clickable, but have the sheet protected.
Both are defined as unlocked. The Group containing the two buttons is also defined as unlocked.
But when I protect the sheet, one of the two buttons gets the pop-up saying the cell is protected - the other button is fine. I've even tried unlocking the cells behind the buttons, but it still pops up.
View 9 Replies
View Related
Oct 20, 2008
I created two radio buttons on a spreadsheet where a user can select
one button for Yes and the other for No. When I right click these
buttons, I notice the names (shown on the left hand side of the
formula bar) are:
Option Button 3 (for No)
Option Button 4 (for Yes)
I'd like to create a macro that automatically selects the Yes or No
button depending on a cell value in another tab. If the cell value is
1, the macro should select Yes. If the value is 0 the macro should
select No.
I tried running the macro below:
Sub testSelectYesOrNo()
If Not IsEmpty(Sheets("Sheet2").Range("A1").Value) Then
Select Case Sheets("Sheet2").Range("A1").Value
Case Is = 1
Sheets("Sheet1").OptionButton4 = True
Case Is = 0
Sheets("Sheet1").OptionButton3 = True
End Select
End If
End Sub
But when this runs I get a "Run-time error 438 Object doesn't support this property or method"
When I click debug, the text "Sheets("Sheet1").OptionButton4 = True"
was highlighted.
View 9 Replies
View Related
Apr 3, 2014
I was viewing this thread here: [URL] ...
How to add checkboxes and radio buttons.
View 8 Replies
View Related
Dec 15, 2008
I work in the science field and I'm trying to record an observation with some codes within a template. I have 5 different codes (A-E) to choose from and want to display the code that the person has chosen for each of the 6 compounds they are working with.
I started creating these command radio buttons with some code to display the results in part particular cell, but I would need to do this 30 times linking each group together to get what I want. I know there's an easier way to do this but ....
View 6 Replies
View Related
Feb 14, 2012
just wondering if there's a way i can make the Radio buttons and check-boxes in my forms select-able by hitting enter? My form is quite long and it takes too much time for users to always have to grab the mouse and click the box, if they could just tab to the radio box or check box and hit enter to select it it would be awesome!
View 2 Replies
View Related
Jul 31, 2007
I am trying to make a basic worksheet that will have radio buttons. I have searched around for about 2 hours and can not find any documentation on how exactly to create a buttons and make it do what I want. I have also tried F1 in Excel but that hasn't helped any either. I did stumble uppon a file called "Options.xls" when searching this forum but it does not explain how the buttons were made. The only thing i can figure out how to do is basically insert a button onto the document, and rename the label of the button that's about it. I basically want to create a group of (3) or so buttons. If button A is picked, cell D1 will display "x". If button B is picked, cell D1 will display "y", and so on. Is there a link to an example out there that shows how to create and use buttons?
View 2 Replies
View Related
Jun 17, 2014
by using radio buttons or checkbox, or anything similar. Based on the answer, I would like cells to appear below the question, for example in B3 another question would be "how many guests would you like to invite?" and B2 would be their answer but is preset to "0"
View 3 Replies
View Related
Oct 18, 2006
every week i send out a pivot table to different project co-ordinators and would like a way of having simple option button so that they can have the data by "hours" or "costs" and can use tick boxes for the row fields they want to show, for example, "profession", "workstage"," name","cost rate". The page field will always be "Project" and the Column Field will always be "Period" and " Date"
I then want the pivot table to change automatically to their choices. I am pretty basic with VBA so may need explanantions too. It would save me sending out 10 versions of a pivot table all feeding off the same data! They could actually do something themselves! (i know they could drag the fileds they want into the areas they need them but trust me when i say they are not that advanced, they are good at ticking!!)
View 2 Replies
View Related
Jan 7, 2010
I have created a survey in excel 2003. It has 70 questions on it and the user responds to the questions by clicking on a radio button. There are 4 radio buttons within a group box for each question and the user will select one of them.
At the end of 'sheet 1' with all these questions on, i have a button which the user presses to proceed to 'sheet 2'. When they press the button i want to ensure is that all questions have been answered ie: 1 of the radio buttons is selected for every question.
If one of the questions isnt answered then a pop up box will appear to tell the user they have unanswered questions and then the vba code will exit and the user stays on the question sheet (sheet 1). If all the questions are answered then the user will move to 'sheet 2'. (the reference cells for all the groups of radio buttons are within column G on sheet 1).
View 3 Replies
View Related
Dec 17, 2009
I'm trying to create a form using radio buttons from the "Forms Tool Bar" and not sure I shouldn't be using the "Control Tool Bar"
I've got multiple buttons and wanted to group them so i used the "Group Box" from the Forms tool bar but now there's a box around the buttons (I've turned off Printing for the box) that gets in the way of other text on sheet. I did some searching and thought I read where you could also use the drawing tool bar and draw a rectangle around the buttons which would then let them operate independent of other groups of buttons but that doesn't seem to work so I'm guessing I imagined it. I also noticed that if you don't draw the "Group Box" around the hole radio button box, they don't work with others in the same "Group Box"
I'm not sure if I should use the buttons in the "Control Tool Bar" but I'm thinking I should so that I have the flexibility should I decide to do something different in the future. I'm thinking about using the buttons to hide a sheet as well as select the sheet for printing, but for now one hurdle at a time.
Lastly I tried looking up some information on how to get the "Control Tool Bar" radio button to behave similar to the "Forms" version of the button (i.e. click the button and it appears to alternate from other buttons in the group), however when I place my mouse over the button it selects it rather than letting me change it's state from true to false.
View 8 Replies
View Related
Mar 16, 2012
I have code in my macro that outputs a radio button for every project that is entered into the database. All radio buttons are part of the same group. I know how to give the radio button an caption name but I do not know how to give the radiobutton an actual name that I can call to. How can I do this in excel macros?
View 9 Replies
View Related
May 19, 2009
how to disable combobox on radio button click in excel macros'
I have 2 radio buttons: optionbutton1 and optionbutton2 and two comboboxes: Combobox1 and Combobox2.If i select 1st radio button 2nd combobox should be disabled.Vise versa
View 9 Replies
View Related
Jan 7, 2010
Can hyperlinks be converted to buttons
I've a large number of links so a global conversion is what I'm hoping for.
P.S. I'm running Excel 2010
View 9 Replies
View Related
Sep 30, 2009
I am trying to do is move between the MultiPage using Next and Back Buttons. I have attached what I have acheived already which is the majority of the work. There's just one minor issue I'm trying to get around.
The back button is disabled when on page 1 and the next button disabled when on the last page, but when the 'Seal Viewer' is opened from the spreadsheet, it starts off on the first Page with the option available to go back which we obviously do not want Yet when we press next and then back the function works correctly.
View 3 Replies
View Related
Nov 7, 2011
I have placed next and back buttons in the userform. I have a total of 8 pages.
The problem is that page 2 and 4 is not active. And I cannot see why. In the properties of the pages the data is exactly the same at all pages.
Are there errors in my code?
Code:
Private Sub cmdNext_Click()
MultiPage1.Value = MultiPage1.Value + 1
End Sub
Private Sub cmdBack_Click()
Dim intPage As Integer
intPage = MultiPage1.Value
Do
[Code] ..........
View 2 Replies
View Related
May 12, 2007
I am developing a macro where I need to open a file, copy a value from a cell in that file and paste it in a cell of the original file. I need to do this several times from the same two files. My problem is that I don't have a command that moves back to the newly opened file to copy another value and paste it, again, in a cell of the original file. I can't use a specific file name to move to the newly opened file because the new file name changes every day. Here is the command that I use to open a new file:
Dim fn As Variant
fn = Application. GetOpenFilename("Excel-files,*.xls", _
1, "Select The Previous Day's Borrowing File To Open", , False)
If TypeName(fn) = "Boolean" Then Exit Sub
' the user didn't select a file
Debug.Print "Selected file: " & fn
Workbooks.Open fn
I need to move back to file fn several times, but, as I stated above, the file fn changes every day.
View 7 Replies
View Related
Jul 9, 2012
I am having some trouble writing a code for a macro that moves data between documents.
The document that I transfer data from is an excel extract from a survey, so everytime I have to run the macro, it is with a new document with a new name.
I can get so far as to move the first cell information into the other specified workbook, but I cannot get the macro to return to the the first document (the one where the name changes with every use).
View 1 Replies
View Related
Mar 14, 2007
i have columnar text that is organized by catagory and sub-catagory. what i would like to do is have a macro to hide/unhide rows containing text under sub-catagories by clicking on the sub-catagory and hide/unhide rows containing sub-catagories by clicking on the catagories.
I'm looking for a way to execute macros to hide/unhide rows according to catagory/sub-catagory and for this macro executer to hide/unhide as needed.
View 6 Replies
View Related
Jun 19, 2007
I am using code that creates a new workbook and then copies a number of sheets to the new workbook. I am using Application. ScreenUpdating = False but as the sheets are being copied over, the Excel task bar button jumps around.
View 2 Replies
View Related
