I have some Worksheet_SelectionChange code that automatically calls a Userform when a cell is selected.
What I want to do is retrieve the data from the cell where the Userform is called from and enter it into a textbox on the Userform.
There are 3 other columns to the right of the cell that is selected.
If there is data populated there, I want this to be copied to the appropriate textboxes on the Userform too.
code to do the following:
If any cell in range T75:KH1000 is selected whose value is "Exit", call the macro named View6.
(There are about 40 non-contiguous cells in this range whose value is "Exit".)
I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.
Private Sub WorkSheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$16"
Select Case Target
Case "Custom Color 1": Call CustomColorInput1
Case "Custom Color 2": Call CustomColorInput1
Case "Custom Color 3": Call CustomColorInput1
Case "Custom Color 4": Call CustomColorInput1
Case Else:
End Select
Case "$A$17"
Select Case Target
Case "Custom Color 1": Call CustomColorInput2
Case "Custom Color 2": Call CustomColorInput2
Case "Custom Color 3": Call CustomColorInput2
Case "Custom Color 4": Call CustomColorInput2
Case Else:
End Select
Case "$A$18"
CustomColorInput 1-6 are the same except they input data into different cells F16-F21.
When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.
Function PullAfterLast(rCell As Range, strLast As String)
PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256)
End Function
When I close VBA, the data that I typed into the data input box is in the correct cell.
So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?
More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?
I have a report with 5-8 sections on it. What I am trying to do is scroll down the worksheet when the first cell in each section is selected so that the user can see the whole section. I tried a something like this
View 3 Replies View RelatedIs there way to automatically clear the contents of a cell when the user clicks in that cell. Eg, click in "A1" then then "A1" clears automatically.
View 10 Replies View RelatedI occasionally give presentations with Excel and would like to make it easier for the audience to see a particular cell when I move to it. The cursor can be tiny, and some people have a hard time seeing the cursor, so I use the keyboard to navigate to the cells I talk about. Yet, the cell, which then has a border around it, still can be hard to see.
Is there a way in Excel to have a cell that is highlighted, that is I move to a cell with the keyboard, so that it pops out in a different font color or background or format, when I move to it, and it automatically reverts to its usual format and color when I move away from it?
I have a user form containing a calendar. What I'm trying to do is that if any cells are selected in a range - D4:E83 - then I want to run the userform therein forcing the user to use the calendar and ensure the date is correctly formatted.
The userform is named frmCalendar.
I would like to have a userform activated when I select a specific cell "g77". I tried a code that I found while searching the forum but it did not work.
The userform name is ufMutualAid
I am not sure if it makes it any easier to write the code three times seperately or if I can put them together, but the same idea is needed for
L79 ufPersonnel
L81 ufApparatus
I have a worksheet that has a months worth of data on it. The sheet is divided into sections with each day of the month being given 10 rows. So day 1 of the month will occupy rows 1 to 10, day 2 rows 11 to 20 and so on.
In each of these sectors, I would like to have an editable tick list that displays when a certain cell is selected. For example in day 1, selecting cell A3 will display the tick box. If I need a tick list for each day, would I need to create a fresh userform for each day or is it possible to have just one form and have excel remember the setting.
I've created a User Form to input data on a dashboard where you can select a date from a dynamic list of dates. The list of dates is calculated using:
Code:
=(TODAY())-WEEKDAY((TODAY()),1)+2
The other dates are based on this date -7.
The User Form code:
Code:
Private Sub CommandButton1_Click()
Dim emptyRow As Long
'Make Sheet30 Active
[Code]....
This works perfectly for any date except dates from December. 3/12/12 (3rd Dec) turns to 12/3/12 (12th Mar) when it's copied to the cell. The same happens for 10/12/12 - becomes 12th October instead of 10th December.
I would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
I've created a simple UserForm, and with some great help from royUK. I've managed to get it working to suite my needs. The next thing I need to do is call it when the user runs the macro.
How do I call the UserForm from within the macro that I created?
Once the user gives the input, how do I take the values and pass them to the loop in the macro?
I wanted to have that one appear whenever a certain cell in a certain sheet gets a specific value, and depending on the answer of the user the Form should set the value of some other cell. So maybe thereŽs a much simpler solution to this task than what I tried - and IŽll be grateful to learn about it.
Anyway I tried the code which follows below - and it works just fine when I call it from the VBE environment - but inside the UserForm it just stops in between (without any error message) when I operate it from the Excel sheet (but still succeeds with the function). IŽll be very happy if someone could solve this "miracle" for me (even IF thereŽs a better solution altogether). So I just provided a simple Function which does nothing but call the UserForm and is executed whenever the condition is met (some calls to MessageBoxes in between just have been added to see how far the code gets executed): Function:
Public Function Call_my_form()
Call Option_Form.Show
MsgBox "Call executed"
End Function
Call of the function: =If(E11="Go";Call_my_form();"Nothing")
The UserForm just uses two OptionButtons with code as follows (two versions to check whether one of these would be the reason - both do behave the same way):
Private Sub OptionButton1_Click()...........................
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long
For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
Is there a way to call a subroutine anytime any control is changed within a userform?
For example,
I have a userform that needs to go through and add/multiply almost every value in every textbox and also add together values associated with checkboxs. I need this to happen anytime a textbox value is changed or a checkbox is checked.
I have a control button on a worksheet that is suppose to call a userform. I am using the code
Frm_Customs.show
But I keep getting an error. The button was created from the control toolbox.
I want to be able to call one user form from multiple ActiveX command buttons. The problem is, the number of command buttons depends on user input on another worksheet, so it's variable.
I've renamed all of the command buttons so they are named "CommandButton" & i, where i is an integer between 1 and, say, 200. I want each of these buttons to direct to the same UserForm where additional information can be entered.
I can't think of a way around the event-handler procedure name.
Sub [Command Button Name]_Click
to call the User Form. I won't know the command button names, because I won't know how many there are (max i) until the user inputs.
Basically, I want to create a For loop through the max i and have the event-handlers call the user form
I could call another userform in a userform(like a new window)?
I want to put a MsgBox when i click in a buttom, but i prefer to use another Userform like a Msgbox because it's looks better than a typical msgbox.
Daily I am getting a file which have so many columns with different names. I used to select and move my required columns to separate place. For exp.
I have the file with various columns, such are.
Sales Qty, Year, Tax, Company Code, Discount Paid, Sales Amount, Company Name
The above column order are not constant, daily the order will changes. But we have to make the order as below
Company Name, Company Code, Year, Sales Qty, Sales Amount, Tax, Discount Paid
Like this we have so many columns in the file and we used to rearrange as required.
Any formula or any macro to avoid this manual work with error, so that i will save my time and free from error.
I'm trying to run a macro called ClearDataSoFar whenever I leave a sheet and come back to it. I think it needs to be within a Worksheet_Activate statement, but not sure how to flesh it out.
Code:
Private Sub Worksheet_Activate()
Application.ScreenUpdating = False
ClearDataSoFar
Application.ScreenUpdating = True
End Sub
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
So I have a quote format with various different products:
B1 to B10 Contains a vlookup with stock codes from another page. C1 TO C20 Contains drop boxes with various different stock items. Some of the stock items are available in singular form and others are in kits. I.e C1 could contain whats in C2. I want to be able to select C1 and have the sheet automatically pull up c2. But I dont want to loose any data that is in c2, in other words I still want to be able to manually select C2.
I am have a spread sheet (sheet 1) with a number of columns and what i am looking to do is see all the people that are participating in a certain stage in the process that is not common, So what i am wanting to do is copy the names and the corresponding number of these people (on sheet1) over to a new worksheet(sheet2) based on a yes or no criteria further on in the spread sheet(sheet1). sheet 2 has additional columns that the workers here would need to fill in.
The criteria is in sheet 1 cells Y2:Y2000
The number is in sheet 1 cells D2:d2000
The names are in sheet 1 cells E2:e2000
If its at all possible i would also like to then make the names of those people on sheet 1 a hyperlink to the additional information
i want to automatic sort data very time i open the file or any change in column b.
i have data in column B from B1 to B100
how to collect data from Column B and place them in Column A star from A1 because Column B not Organized!
I mean B1 have data
B2 have null
B3 have data
B4 have nul .... etc
i want to display all Column B in Column A one by one to be Organized.
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; Im just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test()
Dim SelectDate As Range
Set SelectDate = Range("SelectedDate")
If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then
ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Jan"
ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Feb"........................
I have a sheet named PE which is the main source of handling a contents in other sheet.
How to make a selected contents in PE sheet appears automatically according to weeks in sheet1?
How do i use data validation, offset or combo box to solve this problem?
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
I am trying to set up something similar to the old "print dialogue" box whereupon the user presses a command button on the userform and all sheets within the work book are listed (eg:sheet1, sheet2 etc) The user can select any amount of sheets and and using "OK" outlook is fired up- pretty similar to Ron de Bruins code for email.
I have tried taking the print dialogue vba and stooping it at copy, then trying to gets Ron's code to continue- without success.
There are great bits of code I've seen for select tabs and selct sheets from listbox, but I have found none to email once selected.
I have created a Multipage Userform which I want to control the display when certain condition is met. I am using a button to call up this userform but I wanted to put some limitation to this form being displayed. This form will only be displayed when any of the cells in Column B Row 20 downwards or Column D Row 20 downwards are selected.
View 9 Replies View RelatedI've created and coded a vba userform that creates purchase orders for my projects. The user begins by selecting the project code from the combobox (the project code is a unique identifier of each project). Once the purchase order is created, the information is logged in a separate sheet called "POLog" and the userform is cleared. The project code is saved in the first column of the "POLog".
My problem is that when I have more than one purchase order to create for the same project (sometimes I have 20 or 30), the combobox starts out empty and I have to manually select the project code from the combobox. Is there a way to allow the userform to recall the last project code that was used? Maybe recalling it from the last row in the "POLog" sheet?