I could call another userform in a userform(like a new window)?
I want to put a MsgBox when i click in a buttom, but i prefer to use another Userform like a Msgbox because it's looks better than a typical msgbox.
I've created a simple UserForm, and with some great help from royUK. I've managed to get it working to suite my needs. The next thing I need to do is call it when the user runs the macro.
How do I call the UserForm from within the macro that I created?
Once the user gives the input, how do I take the values and pass them to the loop in the macro?
I wanted to have that one appear whenever a certain cell in a certain sheet gets a specific value, and depending on the answer of the user the Form should set the value of some other cell. So maybe thereŽs a much simpler solution to this task than what I tried - and IŽll be grateful to learn about it.
Anyway I tried the code which follows below - and it works just fine when I call it from the VBE environment - but inside the UserForm it just stops in between (without any error message) when I operate it from the Excel sheet (but still succeeds with the function). IŽll be very happy if someone could solve this "miracle" for me (even IF thereŽs a better solution altogether). So I just provided a simple Function which does nothing but call the UserForm and is executed whenever the condition is met (some calls to MessageBoxes in between just have been added to see how far the code gets executed): Function:
Public Function Call_my_form()
Call Option_Form.Show
MsgBox "Call executed"
End Function
Call of the function: =If(E11="Go";Call_my_form();"Nothing")
The UserForm just uses two OptionButtons with code as follows (two versions to check whether one of these would be the reason - both do behave the same way):
Private Sub OptionButton1_Click()...........................
Is there a way to call a subroutine anytime any control is changed within a userform?
For example,
I have a userform that needs to go through and add/multiply almost every value in every textbox and also add together values associated with checkboxs. I need this to happen anytime a textbox value is changed or a checkbox is checked.
I have some Worksheet_SelectionChange code that automatically calls a Userform when a cell is selected.
What I want to do is retrieve the data from the cell where the Userform is called from and enter it into a textbox on the Userform.
There are 3 other columns to the right of the cell that is selected.
If there is data populated there, I want this to be copied to the appropriate textboxes on the Userform too.
I have a control button on a worksheet that is suppose to call a userform. I am using the code
Frm_Customs.show
But I keep getting an error. The button was created from the control toolbox.
I want to be able to call one user form from multiple ActiveX command buttons. The problem is, the number of command buttons depends on user input on another worksheet, so it's variable.
I've renamed all of the command buttons so they are named "CommandButton" & i, where i is an integer between 1 and, say, 200. I want each of these buttons to direct to the same UserForm where additional information can be entered.
I can't think of a way around the event-handler procedure name.
Sub [Command Button Name]_Click
to call the User Form. I won't know the command button names, because I won't know how many there are (max i) until the user inputs.
Basically, I want to create a For loop through the max i and have the event-handlers call the user form
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End
b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedI have several non-modal userforms in my App, some of them have date-fields that require manual entry typing of dd/mm/yy etc (No single userform has more than one date-box in it, this I think may be pivotally useful)
Now the Userform 'Calendar' that is built on the class of the same (cCalendar) name, has the write value line 'ActiveCell.value = theCal.value'
I'm looking to change this to refer to the correct userform.Textbox value, depending on which form is open.
I would imagine I could simply have a global string, whose value is set (or re-set) whenever a Userform is initialized (some sort of 'ActiveUF.value = Me.Name), where I get lost is referring to the components by name, so as to have a case statement by where I go:
Code:
Private Sub theCal_AfterUpdate()
Select Case ActiveUF
Case "AddForm"
application.vbe.components("AddForm").controls("AddFormDatePicker").value = theCal.value
Case "EditForm"
'.... etc
end select
end sub
better way of doing this (instead of passing around the userform name as a variable) - or proper syntax for referring to controls outside of the 'active' userform (but an open userform nonetheless)?
Every time I have to do this particular thing with userforms, I completely forget how, and the object browser always leads me on an infinite loop of Application.vbe.activevbproject.vbcomponents.vbe.active....
PS - there may be one slight complication to the process - one of the forms, has a 2-tab page in it, each page having similar (but named differently) fields. So I may need to be able to throw in 'Activepage' or whatnot
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
I'm trying to do: Let's say I have a simple userform with labels as follows:
(Label1) John's birthday: (Label2) 12.10.1974
(Label3) Mary's birthday: (Label4) 15.03.1978
(Button1) Change Birthdays
Let's say want to change the birthdays I see, so I press the button and enter the new values through another userform with inputboxes.
How do I make that change permanent, so that next time I start the macro in the labels 2 and 4 I have the last entered values for the birthdays???
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize()
Me.MultiPage1.Value = 0
TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value
Dim hWndForm As Long
Dim hMenu As Long
hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000
hMenu = GetSystemMenu(hWndForm, 0)
DeleteMenu hMenu, SC_CLOSE, 0&
End Sub
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long
Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long
Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
[url]
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies View Relatedhaving trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
In order to deal with the multitude of screen resolutions that can be found at our work, I have got a module to check the current screen resolution on loading the workbook. I then have set up 3 different sized userforms, all containing the same coding, and based on the displayed screen resolution one of these is open (the userforms are named Customer1, Customer2, Customer3).
The displayed userform then has a button to show another userform (Customer_Details), and this form requires some referencing back to the previous form for some of it's information eg,
customer_details.textbox1.text = customer(1, 2 or 3).textbox1.text
customerdetails.combobox1.list = customer(1, 2 or 3).combobox.list
way for me reference the specific "Customer" form that has been opened, without calling it by name?
I have a userform button that when clicked loads another userform.
I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click()
Me.txtAdd.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click()
Me.txtEdit.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I want to use the following to launch a userform I created.
Sub showuserform()
Dim ans As Boolean
ans = msgbox("do you want to show the userform?", vbYesno)
If ans = vbYes Then
userform.show
End If
End Sub
The trouble is that if I click yes, nothing happens.
I am trying to change the property value of all optionbuttons on userform1 via userform2's deactivate event
Private Sub UserForm2_Deactivate()
If userform1.Controls = OptionButton Then
Value = False
End If
End Sub
I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
I have a userform that should return a global varable but when the global varable is used back in the program...it is 0 and not the number in the userform.
The varable I speak of is ForcedCurrent
Global declairation
Private Type TempData
LotNumber() As String
Site() As String
Macro() As String
ChainName() As String
ResistancePerContact() As Double
Index As Integer
End Type
Private Type Lot
Product As String
ParaOrDeft As String
ThermalOrStress As String
Hours() As String
Data() As TempData
Index As Integer
End Type
Dim LotData As Lot
Dim TestNameArray() As String
Dim NumberOfContacts() As Double
Dim ReedholmUnits() As String
Dim ForcedCurrent As Double ...
I have a large userform (Main) that the users enter data into. At the end of the data entry the users click OK and the data is transferred to a spreadsheet. I then ask the users if they want to add another record. If they click "Yes" all is OK. If they click "No" the userform should close and another "switchboard" type userform should open.
My problem is that try as I might I cannot get the (Main) userform to close. It only does so after the switchboard closes.
If I don't load the switchboard, main closes without issue.
I have left out the bulk of the data transferred to the "data" sheet in the code below.
Private Sub Main_OK_Button_Click()
Application.ScreenUpdating = False
Sheets("Data").Visible = True
Sheets("Data"). Range("F2").Value = Surname.Text
Dim result As VbMsgBoxResult
result = MsgBox("Do you wish to enter another record?", vbYesNo + vbInformation, "Continue...")
If result = vbNo Then
Main.URN.SetFocus
Unload Me
Else
I have used a database template from this site and changed it to suit my needs but I have a bit of a problem with some of the code. I know how to update the worksheet with the relevant userform text fields and in another project I did I have successfully sent userform text fields in the body of an email.
For this project I want to update the worksheet AND send an email at the same time. However, using the two pieces of code together is causing an error that I can't seem to solve (using my very limited vba knowledge!). The code I am working on is below and I have highlighted the line that is getting the error message. C
VB:
Private Sub cmdSubmit_Click() 'Submit new record
Dim ws As Worksheet, lRow As Long, Str As String [code]....
I want activation of userform to hide worksheet, but as soon as the Userform is closed, the worksheet should show.
I have attached file to aid.
I've created a userform with a text box and a command button (Enter)
On clicking the command button I'd like whatever text has been entered into the userform to be put into a cell (Say A1).
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
I read from the forum and else where as well on how to make a UserForm that pops up at the beginning of the macro and lists all the tasks that it performs. As the tasks are done, the checkboxes get ticked. And at the end the UserForm closes. Here is my problem.
The UserForm gets created allright but it display a white rectangle until the end and it flashes with the boxes ticked. When I run it in debug, I see the boxes get ticked one after the other. What can be wrong ?
