let's say I run a macro from a button on sheet 3, macro process on sheet 10. Is there a way that the macro would automatically go back to sheet 3? Like a "Back" button on IE. I can't code Sheets("sheet 3").Select because I want it to do the same thing on sheet 4,5,6...
View 3 RepliesI'm listing through sheets and have Sheet2 for drop-down lists.
Sheet2 is not visible, but when I click on Cmdbutton It appears so that I can change values in drop-downs. When I hide Sheet2 again, I want to be back on sheet before Sheet2.
My code for open and close sheet2 :
[Code].....
How can I do that ?
I am working within a workbook with many worksheets and I want the ability to go back to the previous sheet I was on (example - I am on sheet 23, go to sheet 16, I want to be able to have a button or link that takes me back to sheet 23)
View 9 Replies View RelatedI need to copy a changing source cell, paste its value into another specific cell (always the same), and then return to the source cell for continued action (ie range selection, copy & value paste, which I can code).
This action is then followed in the next cell to the R of the first cell copied, etc to end of data. I can code the move to the R.
How do I return to the source cells as part of a loop?
Specific notes included in attached - I hope I've explained it clearly.
I want to have a small button at the top of the sheet that when pressed, will automatically reset all filtered autofilters back to show all.
View 9 Replies View RelatedI currently have a large spreadsheet that multiple people fill out. Each person fills out all the information in a row. At the end of the row, I would like a button that says "Generate Form" so that when clicked, a new sheet automatically opens with a template form that I created and is already filled out with the information that was just inputted into the spreadsheet. Also, there are four different template forms that could generate. For example, there are forms A, B, C and D. If the user inputs "B" into the first column of the row, then when he goes to click "Generate Form", a new sheet is created with all the information filled out in Form B.
View 3 Replies View RelatedI currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
With "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?
View 9 Replies View RelatedI have a macro that unprotects a worksheet copies data from that worksheet and pastes it into a newly created and saved workbook. However I have two problems
1) I'm attempting to copy the data from the first workbook by selecting all cells and then when switching to the new workbook, select all cells and the paste special (values) then paste special (formats). This works when recording the macro but when I attempt to run it it bombs out.
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
2) How do I get the macro to switch back to the workbook it got its data from. The name of the source workbook varies and there may be from 2 to 15 workbooks open. Is there a previous active workbook command? or do I need to create some kkind of temporary value to hold the file name of the source workbook.
how to go back to previous page in internet explorer using vba.
View 2 Replies View RelatedBelow is a macro I'm trying to create. The basically it's supposed to be a quick simple macro to save lots of time. I want to select current tab, move/copy (create copy) to the end....then select the tab I've just copied and copy paste special the values (then rename the tab to todays date) FYI the tab I'm copying is called rebuy shipping.
However, I want to then do the same at a later date with the most recent tab, but with the below code it always selects and copies the original tab:
Sub macrorebuy1()
'
' macrorebuy1 Macro
'
' Keyboard Shortcut: Ctrl+k
'
Sheets("Rebuy Shipping").Select
[Code] .....
I assume this is a simple error. I've tried inserting Activesheet.previous.
I have created a toolbar that has "Previous Worksheet" and "Next Worksheet" buttons on it with the following macros assigned:
Sub NextSheet()
On Error Resume Next
If ActiveSheet. Name = "Problem Listing" Then
MsgBox "This is the last worksheet."
Else
ActiveSheet.Next.Select
End If
End Sub
Sub PreviousSheet()
On Error Resume Next
If ActiveSheet.Index = 1 Then
MsgBox "This is the first worksheet."
Else
ActiveSheet.Previous.Select
End If
End Sub
This seems really simple but the code crashes after 4 or 5 repeated clicks of the button.
I have a user form where the user selects items from combo boxes or enters information into text boxes. When the user clicks the command button the selections are written to the spreadsheet along with an auto number. I am trying to add an auto date in as well and have been playing with using the NOW() function but I am having some problems calling it. Here is the
Private Sub cmbtnAdd_Click()
Dim NewRow As String
Dim NewNumber As String
With Worksheets("Sheet1")
NewRow = .Range("A65536").End(xlUp).Row + 1
NewNumber = .Cells(NewRow - 1, 1).Value + 1
.Cells(NewRow, 1).Value = NewNumber
.Cells(NewRow, 2).Value = Me.ComboBox2.Value
.Cells(NewRow, 3).Value = Me.TextBox1.Value
.Cells(NewRow, 4).Value = Me.TextBox2.Value
End With
End Sub
I was trying something like this:
Dim NewDate As Date
NewDate = DateSerial(Year(dDate), Month(dDate), Day(dDate))
.Cells(NewRow,5).Value = New Date
I have a userform, when using the form it has focus, once I click on my "Ok" command button I want to return focus to the workbook while I leave the userform open. I already have the userform open and on top of the workbook.
View 2 Replies View RelatedI'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
I have multiple excel workbooks open at the same time. I need to run a macro on one of them every 15 min but I need to return to the active window when the macro is done. How do I read what window is active then return to it when the macro is done?
Sub AutoSave()
dTime = Now + TimeValue("00:15:00")
Application .OnTime dTime, "AutoSave"
Windows("data.xlsm").Activate
Sheets("Data").Copy
Application.DisplayAlerts = False
ActiveWorkbook. SaveAs Filename:="c:excel" & Format(Time, "hhmmss"), FileFormat:=xlCSV
ActiveWorkbook.Close
Application.DisplayAlerts = True
Windows(1).ActivatePrevious
End Sub
I need to locate the address of the previous active cell without triggering a selectionchange event (as this is where my code is activated from). Here is what I am currently using unsuccessfully:
strPrevAddress = ActiveCell.Previous.Address
So the constraints are
1. if there's a value in name or names count => must be at least one value in test1 or test2
2. last value in names count must be equal to the sum of trues in B1:B4 Problem Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Trying to figure it out with a some combination of: checking if the last cell I was in was in the range and I am no longer in that range; using the selection change change event?
[Code]....
Attached File : HelpMeWorkbook.xlsx
I have written the below macro to copy data from a sheet called "Fixit Example 1" to a sheet called "Fixit Summary Example". It works fine, but I'd like to be able to run it from any "Fixit Example XX" worksheet. As written, the data is always copied from "Fixit Example 1" regardless of what worksheet I have open.
I tried replacing Windows("Fixit Example 1.xls").Activate with Windows(Active.Worksheet).Activate but got an error "Run time error 424. Object required."
Sub MoveData()
'
' MoveData Macro
' Macro recorded 18/03/2009
I have found this code by searching witch is perfect
Code:
If Target.Cells.Count > 1 Then Exit Sub
Application.ScreenUpdating = False
Cells.Interior.ColorIndex = 0
With Target 'With the cell that was selected,
.EntireRow.Interior.ColorIndex = 8
.EntireColumn.Interior.ColorIndex = 8
End With
Application.ScreenUpdating = True
The point is that i want to retain the previous formatting of cells when i select another cell. And also i would like to create a switch to turn the Worksheet_SelectionChange event on and off. The tricky part is here i guess, becouse i would like when turned off to retain the previous formatting also.
I have made a sheet with 10 input boxes, some for text and some for numbers. If you make a mistake now you must click though the rest of the questions to start again and make a change. Is there a way to add a back button that would take you to the last question? Or possibly make the cancel button stop all questions? Here is a sample of the code
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim strname As String
If Target.Address = Range("k11").Address Then
[Code].....
I'm finalizing an Excel app - which uses Userforms only. On opening the app I use the code line Application.Visible = False
After clicking on my Label2: (I'm taken to the Web site, but when I click the
< (Back button - Return) I am returned to my Userform BUT my Excel App (Menus, etc) is now showing up. How can I keep it "turned-off"?
Private Sub Label2_Click()
Link = "http://www.jmmay.com/"
On Error GoTo TheEnd
ActiveWorkbook.FollowHyperlink Address:=Link, NewWindow:=True
'Unload Me
Exit Sub
TheEnd:
MsgBox "Cannot open Hyperlink"
End Sub
I have been trying to get a back button to work on an 2003 excel document that works like a website.
In the web toolbar there is a facility to go back and forward (very much like using internet explorer). I want a button on the actual sheet that does this command. If i record a macro and click the web 'back' button it records the end result of the process, not the process itself -
eg if sheet 1 and sheet 2 link to sheet 3 and I click a hyperlink from sheet 1 to sheet 3 then create a back button on sheet 3 and record a macro by clicking on the web toolbar back button the macro records the end result - eg Application.Goto Reference:="Sheet1!R14C8". However if i then go to sheet 3 through sheet 2, the back button I created takes me to sheet 1 not back to sheet 2.
Anyone know the code I could use to make it actually go 'back' to the previous page?
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
I have a workbook which has links to another excel workbook (source). This workbook has many sheets -all exact copy- with different names. I changed startup prompt (edit->links) to "dont display the alert and dont update automatic links". Then I recorded a macro for updating links (from source) and assigned this macro to a button. What I want to do is when I click this update button I want links to be updated only on the active sheet that Im on. My problem is, when I press this button, it updates all links including other sheets (basically whole workbook).
My current macro is (I dont know coding but I tried changing ActiveWorkbook to ActiveSheet but it didnt work):
Sub update()
ActiveWorkbook.UpdateLink Name:= _
"C:Documents and SettingsAlperDesktopExcelsource.xls", Type _
:=xlExcelLinks
End Sub
How to make sure that every workbook I create has the option of "backing up before saving" turned-on? I need a Excel-wide option, i.e. one that applies to all workbooks created, The known to me facility of turning the option on every time I create a workbook is not satisfactory because often I forget to turn the option on when creating a new book -- and I create many.
View 2 Replies View Relatedthe macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code?
Sub myfilt()
Application. ScreenUpdating = False
If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
Im creating a template for a number of sheets and I want the hyperlink for my previous/next buttons (to move forward and back through sheets) to change based on cell values.
All my sheets are named as numbers ie '1','2','3' and so on
The name (and therefore number) of the sheet is held in cell E22 on each sheet.
The 'previous' button needs to therefore hyperlink to cell A1 on sheet (E22-1) and the 'Next' button to cell A1 on sheet (E22+1)
The 'buttons' I have though are arrows from Excels shapes and I dont know how to add code to them though to start the hyperlink.
Also if i wanted to reference sheet E22-1 etc in a HYPERLINK() function what is the syntax?
I'm using a macro to paste a formulae into a destination cell on another worksheet.
The problem is that I need the Macro to put the name of the active sheet into the formulae
VB:
Sheets("Front").Select
Range("E1").Select
Selection.End(xlDown).Select
Range("E3").Select
ActiveCell.Formula=INDIRECT(ADDRESS(MATCH(9E+99+306,*****ActiveSheet.Name*****!F:F,1),6,4))
The macro has to work whis way becuse I will be using it with multiple worksheets, all with different names.
How to modify the below vba code? It sends an email with an attachment right away after pressing the macro button. I would like the user to see the email in outlook before it gets send... and then press 'send' in Outlook .....
Sub Mail_ActiveSheet()
'Working in Excel 2000-2013
'For Tips see: http://www.rondebruin.nl/win/winmail/Outlook/tips.htm
Dim FileExtStr As String
Dim FileFormatNum As Long
[Code] .....