I need to locate the address of the previous active cell without triggering a selectionchange event (as this is where my code is activated from). Here is what I am currently using unsuccessfully:
strPrevAddress = ActiveCell.Previous.Address
So the constraints are
1. if there's a value in name or names count => must be at least one value in test1 or test2
2. last value in names count must be equal to the sum of trues in B1:B4 Problem Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Trying to figure it out with a some combination of: checking if the last cell I was in was in the range and I am no longer in that range; using the selection change change event?
[Code]....
Attached File : HelpMeWorkbook.xlsx
I have found this code by searching witch is perfect
Code:
If Target.Cells.Count > 1 Then Exit Sub
Application.ScreenUpdating = False
Cells.Interior.ColorIndex = 0
With Target 'With the cell that was selected,
.EntireRow.Interior.ColorIndex = 8
.EntireColumn.Interior.ColorIndex = 8
End With
Application.ScreenUpdating = True
The point is that i want to retain the previous formatting of cells when i select another cell. And also i would like to create a switch to turn the Worksheet_SelectionChange event on and off. The tricky part is here i guess, becouse i would like when turned off to retain the previous formatting also.
I am working on macro, I want to have a formula in Sheet2 which pulls hyperlink from an active cell.
to select & and copy I use - Range("J" & ActiveCell.Row).Copy
Its a dynamic selection of cell. Any excel formula or VBA code to pull hyperlink from active cell and paste it to sheet2.
Is there a formula in Excel that returns the active cell address (ie dynamically). Excel updates the activecell address in the Name Box dynamically as you make a selection but I cannot find a standard formula to access it. I know I can achieve this with code using the selection-change event but this action then disallows use of the Undo button - which I specifically want to avoid. Perhaps there is an add-in available?
View 9 Replies View RelatedI have an embedded chart on my worksheet.I can select a cell behind the chart using the keyboard arrow keys.Is there a way of doing this using a mouse click,so that I know which cell i am pointing to/choosing?
View 4 Replies View RelatedIs it possible for a Macro to read a cell say D:11 and copy that email address and send the active sheet to that email?
View 9 Replies View RelatedI'm listing through sheets and have Sheet2 for drop-down lists.
Sheet2 is not visible, but when I click on Cmdbutton It appears so that I can change values in drop-downs. When I hide Sheet2 again, I want to be back on sheet before Sheet2.
My code for open and close sheet2 :
[Code].....
How can I do that ?
I have multiple excel workbooks open at the same time. I need to run a macro on one of them every 15 min but I need to return to the active window when the macro is done. How do I read what window is active then return to it when the macro is done?
Sub AutoSave()
dTime = Now + TimeValue("00:15:00")
Application .OnTime dTime, "AutoSave"
Windows("data.xlsm").Activate
Sheets("Data").Copy
Application.DisplayAlerts = False
ActiveWorkbook. SaveAs Filename:="c:excel" & Format(Time, "hhmmss"), FileFormat:=xlCSV
ActiveWorkbook.Close
Application.DisplayAlerts = True
Windows(1).ActivatePrevious
End Sub
let's say I run a macro from a button on sheet 3, macro process on sheet 10. Is there a way that the macro would automatically go back to sheet 3? Like a "Back" button on IE. I can't code Sheets("sheet 3").Select because I want it to do the same thing on sheet 4,5,6...
View 3 Replies View RelatedAssume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012
Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012
Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
Trying to word this right. I have one cell with a date of 01/01/2010. I have other cells that I want to be equal to this cell plus 1 or more months.
For example A1=01/01/2010
I want A2 to = 02/01/2010 based on one calendar month entered into A1. So if A1 changes 03/01/2010, A2 will = 04/01/2010.
I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
Trying to get a record of who authorized spending in one of my worksheets and when they did it
I had some VBA code in one of my worksheets which added a time stamp and a user ID to two different cells after the user enters their name. Why it is no longer working, though I suspect after moving the worksheet around.
I would like my users to type their name into cell G65 (which is actually merged from G65-K65). Once the user enters their name, cell L65 (which is actually merged L65-O65) populates with the current time stamp. Also, when the user enters their name into cell G65, I would like cell P65 (which is actually merged into P65-S65) to auto populate. I would like this all of this to go down through line 70.
I want to copy formula from previous row to next cell when i enter something in perticular cell.
i.e
--Colomn A --- Colomn B -- --------Colomn C
1 01-09-07 ----- John ----------=vlookup(b2,$s$1:$t$10,2,false)
2 01-09-07 ----- Smith -------- =vlookup(b3,$s$1:$t$10,2,false)
3
4
5
Now if i enter date in cell A3 then cell C3 should be automatically filled/copy formula as celll C2. and so on......
then if i enter data to A4 then cell C4 should be automatically filled/copy formula from cell C3.
I have also attached example file.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
With "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?
View 9 Replies View RelatedI have a DDE-based worksheet, that is obtaining data from Townsend Analytics' RealTick Server software. One of my cells is a DDE formula that retrieves the current BID ask price, for a given stock.
When a new BID price comes in to my designated cell, I need to somehow capture the existing BID price, before this new one updates in the requisite cell. I want to be able to store this "old" value in another cell.
Unfortunately, there is no "pre-cell" event trapping. I've tried to work with the worksheet_change event, which passes an argument of the effected cells, but the cell value has already changed, by the time this event has been called.
This problem sounds simple, but I am at a loss for a solution. Does anybody out there in EXCEL-land have a solution ?
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View RelatedIf I want to create a column of numbers, say 1 2 3 4 5, I can simply add +1 to the previous cell and then use "fill down" to generate my number sequence. How would one generate a column of numbers that repeat once? e.g.: 1 1 2 2 3 3 4 4 5 5, etc
View 3 Replies View RelatedHow could i change this formula so
If the previous cell "filled with a number" in column D is equal to C17 Then C18 otherwise c17
This is the formula
This formula is in D38
=IF(DAY(A38)=DAY($C$13),$C$17,)
This formula is in D65
I also need to apply the same to this formula
=IF(MOD(ROW(A38)-MATCH($C$13,A:A),7)=1,$C$17,)
We have a sizeable Excel workbook that contains many worksheets for various things, everything works smoothly except for one minor niggle.
I am looking for a formula that references to a cell on a previous worksheet, the worksheet could be named anything (eg A1, B, 2, 3.4, etc). Then to add 1, ideally the first worksheet inserted must equal, say, 0 BUT can reference the sheet previous as this is a constant; so something along the lines of...
Cell A1 =magic formula
Cell A2 =A1+1
This is to get a vlookup to work consistently.
OR another option is, for the worksheet to reference an already populated worksheet and read down a table by adding one to reference the cells. Eg first sheet reads ='schedule'!A13, the next sheet added would read A14 then A15 etc...
OR a worksheet (like page numbers) count into a cell onto each worksheet inserted, eg on worksheet 6 in cell A1 the number 6 would be inserted then worksheet 7 would have 7 inserted into A1 etc..
[Code] ......
What is wrong with above code? I am not able to select previous A15 cell, when macro is selected from C1 cell ( B row is filtered to hide ).
I have a cell (F2) that is auto updated with total sales units for today (Its a simple counter of individual sales). I want to detect when there is a "batch" of sales >= 10. ie. F2 may start at zero for the day and increment by 1,2,5 or 10 units at a time. If the increment is 10 units or more I would like to detect this and store the result in cell G4.
Typical values in C2: 0, 1, 6, 7, 9, 19, 21, 22 etc as new orders arrive. The larger order between 9-19 (viz 10 or more), I need to detect and store in G4. I know that I need to use both the current value of F2 (say 19) and the previous value of F2 (say 9) to perform this, but the solution eludes me.
I am using the following code (I found here), to test for unlocked cells when I am creating a sheet. (I'm really new at this) I have 2 issues. First this (below) doesn't end itself, I have to escape or pick another cell. Second, I would like another button to return cells to the previous color after I have corrected any locked/unlocked cell errors.
Private Sub CommandButton2_Click()
Sheets("bf calcs").Select
Sheets("bf calcs").Unprotect ""
[Code]...
I have a row of dates with a variable number of nonblank cells between them. e.g.:
A1 1/9/12
B1 6/9/12
C1
D1 8/9/12
E1
F1
G1 12/9/12
I want to calculate the NETWORKDAYS between dates, but where there is a blank cell, I want to be able to use the date in the previous nonblank cell. For example, NETWORKDAYS(B1,D1), if cell C1 is blank or NETWORKDAYS(D1,G1), if cell F1 is blank.
how to get the value of the previous nonblank cell and nest it inside the NETWORKDAYS formula?