Macro - Paste Formula Into Another Worksheet Using Active Sheet Name As Reference
Jan 9, 2014
I'm using a macro to paste a formulae into a destination cell on another worksheet.
The problem is that I need the Macro to put the name of the active sheet into the formulae
VB:
Sheets("Front").Select
Range("E1").Select
Selection.End(xlDown).Select
Range("E3").Select
ActiveCell.Formula=INDIRECT(ADDRESS(MATCH(9E+99+306,*****ActiveSheet.Name*****!F:F,1),6,4))
The macro has to work whis way becuse I will be using it with multiple worksheets, all with different names.
View 9 Replies
ADVERTISEMENT
May 14, 2014
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
View 4 Replies
View Related
Oct 22, 2007
Currently I have a worksheet which is organized to have two pages on it. I will try to explain, i.e. imagine one page of the worksheet in the hypothetical range of A1:D26, then another page in the range E27:K50. So it is staggered on the same sheet. Is there an easy way to copy the range of E27:K50 onto another worksheet.
Aside from the regular copy and paste, I am having problems because there are formulas in the 2nd range (E27:K50) which loose their references once copied.
i.e the formula SUM(A1:A10) I would like to be SUM('Master List'!A1:A10) on the new sheet. Is there an easier way then going through all the formulas and adding the master list part.
View 5 Replies
View Related
Jun 29, 2008
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
View 7 Replies
View Related
Oct 8, 2009
Maybe it's not as complicated as i'm thinking, but i'm trying to figure out a formula (or macro) that will let me basically fill in a blank from a (nearly) irrelivant second worksheet. The only similarity the two will have is a PO number, or in my picture diagram, it's a letter. The worksheet that i'm trying to fill in the blank from has maybe 1500 entries, the worksheet i am referencing to has roughly 11,000, so sorting it would make no difference and the columns would be very inconsistant with eachother, but the rows will be similar.
I want to start a formula in Sheet one, that looks at the Letter in that same row, finds that Letter in Sheet two, and gets information from the same row but a few columns over. I might be explaining this poorly, so here's a picture of what i'm referring to. I'm trying to fill in F6 in Sheet 1 with information from F2 in Sheet 2.
View 5 Replies
View Related
Feb 21, 2009
I am trying to select cells, tables and charts by just knowing their name. Thus if possible I would like to only refer to a chart by its name i.e. not know what worksheet they are on. This seems to work for named ranges of cells/tables, but not charts (I can't get my named charts to appear in the "Define Name" dialog).
I found this code that loops through charts on the activesheet and shows the names. However, I would much prefer not to have to specify the sheet or to loop through all the sheets trying to locate the one with the named chart.
Public Sub GetEmbeddedCharts()
Dim myChart As ChartObject
Dim myCharts As ChartObjects
Set myCharts = ActiveSheet.ChartObjects
For Each myChart In myCharts
Debug.Print myChart.Chart.Name
Next
End Sub
View 4 Replies
View Related
Feb 27, 2014
My company has complicated time sheets because we have several tasks that are billed differently to different people. Once a month we have to sit down and compile everything from several forms and so forth. I have created a worksheet that pulls all the numbers together so that they can simply be copied and pasted into our reports. The hope was to simply copy this worksheet into a time sheet workbook and it will pull out all of the correct numbers. Although all the time sheet workbooks are set up the same way, whenever I copy the file into another time sheet workbook the program keeps its references from the workbook it was in. Make sense? is there a formula that I can insert into an array to tell it to pull the information from the worksheet with the same name, but in the active workbook?
here is one of the equations I am working with:
{=TRANSPOSE('1st week'!A10:L48)}
so it would look something like this maybe
{=TRANSPOSE('[active workbook]1st week'!A10:L48)} but this doesn't work of course.
View 3 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
Sep 11, 2006
I want to copy data from the current sheet, and past it in the "montly" sheet.
'i and j were defined above, with a Case statement
Range(" Ai:Cj").Select
Selection.Copy
Sheets("monthly").Select
' I want the upper left cell of the pasted area to be A11
Range("A11").Select
ActiveSheet.Paste
I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
View 2 Replies
View Related
Jun 12, 2007
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View 3 Replies
View Related
Jul 30, 2009
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
View 9 Replies
View Related
Nov 10, 2009
I could use some assistance in creating a macro that will delete all and only text boxes on the active sheet. Some text boxes will be empty, but I still wish for them all to be deleted. Through searching the forums I see a similiar code, but it deletes all shapes on the active sheet:
View 8 Replies
View Related
Mar 27, 2014
Say i have a Worksheet named "gateway" or sometimes it will be "gateway (2)" (3) and so on. Is there a macro that i can call that in some ways calls the active worksheet and renames it to just "gateway" everytime?
View 2 Replies
View Related
May 12, 2006
Basically trying to make change the active worksheet using a macro code. I want the user to be able to click a button and it will automatically switch the worksheet to another within the workbook.
View 5 Replies
View Related
Jul 8, 2009
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
View 9 Replies
View Related
Mar 12, 2009
I am having trouble renaming an active sheet from a Macro I stored in the personal.xls file. I want the active sheet to be renamed to "Data_Source" and then the rest of the code can kick in. Instead of renaming the current worksheet it creates a new one.
View 4 Replies
View Related
Jun 7, 2013
I need the macro to filter a table using the name of active worksheet as criteria. The code that I am writing is as below, but it doesn't seem work:
ActiveSheet.Range("$A$1:$AE$421").AutoFilter Field:=19, Criteria1:="Activesheet.Name"
If I hard quote the name of the sheet then, the macro, unchecks all the criteria in the filter and does not show and row in the table.
View 1 Replies
View Related
May 12, 2006
I have a workbook with about 12 worksheets within it. I am trying to input a button on worksheet 3 that when pushed would activate worksheet 12. Basically the same as if you clicked on the tab at the bottom of the screen called worksheet 12.
I realise that you have to create a button which Ive done. However I cannot seem to figure out the proper macro code to get the button to change the current worksheet when its pushed.
View 4 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Nov 7, 2012
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
View 3 Replies
View Related
May 14, 2012
I want to use the Active Sheet name in a VLOOKUP formula....but no matter which way I type it, I get an error
Code:
Range("B1").formula = "=VLOOKUP(& ActiveSheet.name & ,CC Overhead Summary!B23:H36,7,FALSE)"
I'm at the can't see the forest for the trees stage.....
View 4 Replies
View Related
Mar 18, 2009
I have written the below macro to copy data from a sheet called "Fixit Example 1" to a sheet called "Fixit Summary Example". It works fine, but I'd like to be able to run it from any "Fixit Example XX" worksheet. As written, the data is always copied from "Fixit Example 1" regardless of what worksheet I have open.
I tried replacing Windows("Fixit Example 1.xls").Activate with Windows(Active.Worksheet).Activate but got an error "Run time error 424. Object required."
Sub MoveData()
'
' MoveData Macro
' Macro recorded 18/03/2009
View 9 Replies
View Related
Jun 20, 2012
I have recorded a macro to create a pivot table. I thought I had it so that it would create the pivot from the active worksheet only. But looking at the code, it is picking up the sheet name from the one I recorded it from
Code:
Sub SalPiv()
'
' SalPiv Macro
' Macro recorded 20/06/2012 by imccormick
[Code].....
View 1 Replies
View Related
Mar 17, 2014
I find out a code to create a PDF (with opening the Save As dialog box) from an active worksheet, but I can't find out how to send this PDF by e-mail (Outlook). The code is working till the words 'Set OutApp'.
Just what I want is to send the active worksheet as PDF (as attachment) by email (Outlook). Here the present code.
Code:
Sub SendPDF()
'
' SendPDF Macro
'
Dim OutApp As Object
Dim OutMail As Object
Dim v As Variant
v = Application.GetSaveAsFilename(Range("E2").Value, "PDF Files (*.pdf), *.pdf")
[code]....
View 9 Replies
View Related
Apr 2, 2007
I need to get this macro to process the cells for every worksheet in a book rather than just the active one
Public Sub test()
Dim Lr As Long, i As Long, x As Range, _
v1 As String, v2 As String, v3 As String
Set x = ActiveSheet.Cells.Find("*", searchdirection:=xlPrevious)
If x Is Nothing Then Exit Sub
Lr = x.Row
Application.ScreenUpdating = False
For i = Lr To 1 Step -1
v1 = Cells(i, 2)
v2 = Mid(Cells(i, 3), 1, 1)
v3 = Cells(i, 4)
If v1 "OP00" Or v2 "L" Or v3 "CC" Then Cells(i, 1).EntireRow.Delete
Next
Application.ScreenUpdating = True
End Sub
View 9 Replies
View Related
Apr 30, 2008
I have searched the FAQ's but have not found a suitable answer to my problem. I have some code that works perfectly when it is run from the VB Editor but when I put it behind a command button it gives me an error almost straight away. I have read that when a command button is used the command button defaults the active sheet to the one that it is one therefore you always have to specify the active sheet but I have done this so am still confused as to why it is falling over. Below is my code, I have commented where it is tripping:
Sub FormattingAcutalReport()
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesMF Consolidated Risk DAILY LIVE DATA FROM BO.xls"
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesDaily Non Banks LIVE.xls"
Dim myBorders() As Variant, item As Variant
Set SEGNSEG = Workbooks("Todays Reports.xls").Worksheets("Seg and Non Seg Bank Summary")............................
View 2 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 15, 2009
I have a workbook which has links to another excel workbook (source). This workbook has many sheets -all exact copy- with different names. I changed startup prompt (edit->links) to "dont display the alert and dont update automatic links". Then I recorded a macro for updating links (from source) and assigned this macro to a button. What I want to do is when I click this update button I want links to be updated only on the active sheet that Im on. My problem is, when I press this button, it updates all links including other sheets (basically whole workbook).
My current macro is (I dont know coding but I tried changing ActiveWorkbook to ActiveSheet but it didnt work):
Sub update()
ActiveWorkbook.UpdateLink Name:= _
"C:Documents and SettingsAlperDesktopExcelsource.xls", Type _
:=xlExcelLinks
End Sub
View 2 Replies
View Related
May 26, 2009
I'm working on setting up a chart. The formula I'm using for cell B21 is this: =ROUND(F3,0) & " " & IF(E3<F3 ...
View 2 Replies
View Related
Nov 20, 2012
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
View 7 Replies
View Related
