I'm listing through sheets and have Sheet2 for drop-down lists.
Sheet2 is not visible, but when I click on Cmdbutton It appears so that I can change values in drop-downs. When I hide Sheet2 again, I want to be back on sheet before Sheet2.
My code for open and close sheet2 :
[Code].....
How can I do that ?
let's say I run a macro from a button on sheet 3, macro process on sheet 10. Is there a way that the macro would automatically go back to sheet 3? Like a "Back" button on IE. I can't code Sheets("sheet 3").Select because I want it to do the same thing on sheet 4,5,6...
View 3 Replies View RelatedI am working within a workbook with many worksheets and I want the ability to go back to the previous sheet I was on (example - I am on sheet 23, go to sheet 16, I want to be able to have a button or link that takes me back to sheet 23)
View 9 Replies View RelatedWith "edit directly in cell" turned off, if you double click through in a cell containing a formula to the cell being refferenced, is there a quick way of getting back to the original cell you clicked on?
View 9 Replies View RelatedI have a macro that unprotects a worksheet copies data from that worksheet and pastes it into a newly created and saved workbook. However I have two problems
1) I'm attempting to copy the data from the first workbook by selecting all cells and then when switching to the new workbook, select all cells and the paste special (values) then paste special (formats). This works when recording the macro but when I attempt to run it it bombs out.
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
2) How do I get the macro to switch back to the workbook it got its data from. The name of the source workbook varies and there may be from 2 to 15 workbooks open. Is there a previous active workbook command? or do I need to create some kkind of temporary value to hold the file name of the source workbook.
I need to copy a changing source cell, paste its value into another specific cell (always the same), and then return to the source cell for continued action (ie range selection, copy & value paste, which I can code).
This action is then followed in the next cell to the R of the first cell copied, etc to end of data. I can code the move to the R.
How do I return to the source cells as part of a loop?
Specific notes included in attached - I hope I've explained it clearly.
how to go back to previous page in internet explorer using vba.
View 2 Replies View RelatedI have a userform, when using the form it has focus, once I click on my "Ok" command button I want to return focus to the workbook while I leave the userform open. I already have the userform open and on top of the workbook.
View 2 Replies View RelatedI have multiple excel workbooks open at the same time. I need to run a macro on one of them every 15 min but I need to return to the active window when the macro is done. How do I read what window is active then return to it when the macro is done?
Sub AutoSave()
dTime = Now + TimeValue("00:15:00")
Application .OnTime dTime, "AutoSave"
Windows("data.xlsm").Activate
Sheets("Data").Copy
Application.DisplayAlerts = False
ActiveWorkbook. SaveAs Filename:="c:excel" & Format(Time, "hhmmss"), FileFormat:=xlCSV
ActiveWorkbook.Close
Application.DisplayAlerts = True
Windows(1).ActivatePrevious
End Sub
I need to locate the address of the previous active cell without triggering a selectionchange event (as this is where my code is activated from). Here is what I am currently using unsuccessfully:
strPrevAddress = ActiveCell.Previous.Address
So the constraints are
1. if there's a value in name or names count => must be at least one value in test1 or test2
2. last value in names count must be equal to the sum of trues in B1:B4 Problem Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Is it possible to identify once any of the cells in A9:D12 are activated that once that range is deactivated I run the check to make sure the constraints are met, and populate default values in the case they are not?
Trying to figure it out with a some combination of: checking if the last cell I was in was in the range and I am no longer in that range; using the selection change change event?
[Code]....
Attached File : HelpMeWorkbook.xlsx
I have found this code by searching witch is perfect
Code:
If Target.Cells.Count > 1 Then Exit Sub
Application.ScreenUpdating = False
Cells.Interior.ColorIndex = 0
With Target 'With the cell that was selected,
.EntireRow.Interior.ColorIndex = 8
.EntireColumn.Interior.ColorIndex = 8
End With
Application.ScreenUpdating = True
The point is that i want to retain the previous formatting of cells when i select another cell. And also i would like to create a switch to turn the Worksheet_SelectionChange event on and off. The tricky part is here i guess, becouse i would like when turned off to retain the previous formatting also.
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"
Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.
I am stuck however referring to the previous sheet to update the date value in "A1"
Code:
Private Sub ComboBox1_Change()
ActiveCell = Me.ComboBox1.Value
End Sub
How do I get focus back to the sheet or cell instead of the ComboBox ?
I have a sheet that contains dates going back a few years. I am trying to use the countif function to count the different sites in column B according to date. eg I want to be able to find out how many jobs for PHO1 were created between todays date and 7 days ago, this can go into column C, In column D I need to find out how many jobs were created by PHO1 between 7 and 14 days ago etc etc....
View 9 Replies View Relatedwhat im hoping to do is when i press macro button"click to sort" on sheet totals
it will automatically input the totals from "TOTALS" underneath the right name and put the date in column a the trouble is the cells are dependant on the sort so if i was to press "click to sort" now it would transfer this data to sheet "PTS AND DATES"
09/02/09 in cell a2
1146 in b2
861 in c2
860 in d2
849 in e2
806 in f2
the very next time i press it , it will put data into row 3.
I've got a workbook that increments in sheets for each new week. I have a cell showing the current week number for that sheet ( lets say cell C1) and any formulas that need to reference data from the previous sheet do in 'indirect' function which basically looks at the current week number ( lets say week 20)in cell C1 and minus's 1 to navigate to the previous week (week 19).
I was wondering if there was a way to reference the previous sheet purely by the order they're in.
So say i have 5 sheets named "1,4,5,8,9" and these represent week numbers so the sheet named '8' in cell C1 would have '8' standanding for the week number but cells that wanted to reference the previous sheet couldn't do the 'indirect' C1-1 as there is no 'week 7'.
The weeks used could vary alot so a formula to reference the directly previous sheet is needed.
ok, thought best if i show you the actual formula
=IF(ISBLANK(C12),"",IF(ISERROR(VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE)),G12,SUM(G12,VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE))))
the '$A$G2-1' part is the bit that redirects to the previous sheet based on it's name, what i think i really need is to replace this part with a 'PrevSheet' function but i'm unsure how.
I've found on this newsgroup a function to get the previous sheet
name
Function PrevSheet()
On Error GoTo EndFunction
Application.Volatile True
PrevSheet = Application.Caller.Worksheet.Previous.Name
Exit Function
EndFunction:
With Application.Caller.Parent.Parent.Worksheets
PrevSheet = .Item(.Count).Name
End With
End Function
when i put =PrevSheet() i get the previous sheets name
What i want to be able to do is use this in place of directly
referencing the sheet name in my code as follows...
=IF(G4-J4<0,G4-J4,G4-J4)+'Week 1'!H4
So i want to be able to replace Week 1 with PrevSheet but i've tried
and falied on this. eg...
=IF(G4-J4<0,G4-J4,G4-J4)+PrevSheet()!H4
Could someone show me the correct syntax for this.
I am writing a macro that goes from one sheet to another sheet to copy data but then must return to the 1st sheet to paste it.
Is there a command for returning to a previous sheet.
Note that the sheets may not necessarily be in consecutive order ie. the 2nd sht may not be immediately after the 1st sheet in the sheet tab order.
The spreadsheet will be made up of a number of sheets that can use the same macro to reference a master sheet to copy and return data.
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
how to properly write this kind of commands!
v_1 = Sheets("WB_Input").Cells(i, 2) 'It's gonna be a numeric value like 10
v_2 = "E"
v_3 = Sheets("WB_Input").Cells(i, j) 'It's gonna be a numeric value like 12
Sheets("WB_Output").Cells(i, j) = "=CONCATENATE(" & v_1 & "," & v_2 & "," & v_3 & ")"
Thing is once I look at the WB_Output Sheet what I see is an error and the cell shows this: =Concatenate(10,E,12)
So logically the problem is that I need to make it show up as =Concatenate("10","E","12")
Btw, I can't just put v_1 & v_2 & v_3, cause Excel understands "E" as exponential!
Below is a macro I'm trying to create. The basically it's supposed to be a quick simple macro to save lots of time. I want to select current tab, move/copy (create copy) to the end....then select the tab I've just copied and copy paste special the values (then rename the tab to todays date) FYI the tab I'm copying is called rebuy shipping.
However, I want to then do the same at a later date with the most recent tab, but with the below code it always selects and copies the original tab:
Sub macrorebuy1()
'
' macrorebuy1 Macro
'
' Keyboard Shortcut: Ctrl+k
'
Sheets("Rebuy Shipping").Select
[Code] .....
I assume this is a simple error. I've tried inserting Activesheet.previous.
We have a sizeable Excel workbook that contains many worksheets for various things, everything works smoothly except for one minor niggle.
I am looking for a formula that references to a cell on a previous worksheet, the worksheet could be named anything (eg A1, B, 2, 3.4, etc). Then to add 1, ideally the first worksheet inserted must equal, say, 0 BUT can reference the sheet previous as this is a constant; so something along the lines of...
Cell A1 =magic formula
Cell A2 =A1+1
This is to get a vlookup to work consistently.
OR another option is, for the worksheet to reference an already populated worksheet and read down a table by adding one to reference the cells. Eg first sheet reads ='schedule'!A13, the next sheet added would read A14 then A15 etc...
OR a worksheet (like page numbers) count into a cell onto each worksheet inserted, eg on worksheet 6 in cell A1 the number 6 would be inserted then worksheet 7 would have 7 inserted into A1 etc..
After a formula to copy the contents of a cell in the previous sheet in a workbook, so that if I was to copy the last sheet in a workbook the formula would automatically reference the cell from the copied worksheet and so on if I copied tht one.
Hope this makes sense I have a lot of formulas referencing the previous sheet and everytime I copy this sheet to create a new sheet I have to change the sheet number in the formulas.
eg, in sheet 8 this formula get info from sheet 7 cel J30 ='7'!J30 when i copy the sheet to create a new one (Sheet 9) I would like the new formula to automatically be ='8'!J30.
I have created a toolbar that has "Previous Worksheet" and "Next Worksheet" buttons on it with the following macros assigned:
Sub NextSheet()
On Error Resume Next
If ActiveSheet. Name = "Problem Listing" Then
MsgBox "This is the last worksheet."
Else
ActiveSheet.Next.Select
End If
End Sub
Sub PreviousSheet()
On Error Resume Next
If ActiveSheet.Index = 1 Then
MsgBox "This is the first worksheet."
Else
ActiveSheet.Previous.Select
End If
End Sub
This seems really simple but the code crashes after 4 or 5 repeated clicks of the button.
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....