I would like to run Macro_1 at every day 3.40pm. I have inserted following code to workbook.
Private Sub Workbook_Open()
Dim when As Variant
Dim name As String
Dim torlance As Variant
Application.OnTime when = "15:40:00", name = ("WeeklyStockReconciliation1")
End Sub
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedI have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
I have been battling with this report I have been working with for sometime. Is there a way in Excel where I can automatically add zero into the time format?
The problem is I have to import data from another source and the time displays as a time format showing :59:00 insted of 0:59:00. Excel will not sum the calculation without the zero infront of the colon. This makes my report very time consuming. Can someone show me a way that I can automatcially add zero's infront when having data under 1:00:00?
Based on the attached I want to make the time automatically count down in MS Excel using VBA.
The attached will give you a flavour for what I want to achieve.
I would like to save a spreadsheet at a certain time every day.
View 5 Replies View RelatedI have a cell (H2) that contains the formula =NOW(). I would like this cell's time to be updated every minute automatically, with a Macro that will start itself the moment the spreadsheet is opened. I have attempted to find other users with the same question and have attempted to use Macro's supplied however without success. I have previously found this piece of ...
View 5 Replies View RelatedI have a speadsheet with a column of student names with corresponding columns of classes and class times. The class times are on a rotating schedule and will be35 minutes later every week. Groups A to D have rotating lessons at 8.55, 9.30,10.05, 10.40 and groups E and F have rotating lessons at 11.45 and 12.20. I need to print slips with student names and class times each week. I want to be able to update the lesson time for the next week automatically. The only way I have thought to create a custom sort list with lesson times and I drag and fill series for new lesson times. However, the list doesn't return to the beginning of the series, it creates a new lesson time. My question is, is there a better way to update the lesson times?
View 1 Replies View RelatedIs is possible to have Excel update time automatically in a given cell within the spreadheet.
I have a spreadsheet that I need Excel to update the time automatically .
I would like Excel to update the time automatically in cell A1.
I have done some research and found the following thread but this only works when we close and open the spreadsheet.....
I want to write a piece of code that will automatically do a SaveAs on the workbook I'm using, say every hour, and add the current system date and time to the filename every time.
View 4 Replies View RelatedHow to set a column up to show it as the time of day but unless I enter PM after I put the time in the column it always comes up as AM.
Is there some way to just enter 9:09 in column d and or f and have it show up as pm? When I enter 8:10 in column b it automatically adds the AM to it but if I do the same in the column for the night and I do not type in pm it will automatically enter it as am.
I have attached the workbook and did delete the macro - which was just to clear all of my entries but when I click to open it again I am still getting the message about the macro.
In the workbook when I enter the time in column B I can just type in 7:14 and it will automatically add the AM to it. However, when I get to column D or F if I just type in 9:09 or whatever time it is in the evening it will automatically add AM to it unless I type 9:09 pm.
Is there some way to set it up so that I can just enter the time and it will automatically enter pm for everything in that column?
2013 sugar logs.xls
I am trying to automatically insert a time into B and a date into A every time something is entered into C. I want the time and date to not change from the time it was posted. What formula will accomplish this?
I tried using if(C"",now(),"") while having Workbook Calculation set to automatic, but it would update every cell in column B every time I entered data into a new cell in column C.
I have a set of 3,000 data points. The data is in one second intervals, however I am interested in seeing what the data looks like in a graph if I only had a point every minute. I have the following set up.
A B C
TIME X Y
What I want to do is to leave the first cell unhidden, and then hide the next 59. And then repeat this so I narrow the data down to one second each. I'm looking to do this multiple times, so I can create a graph each time in order to get an idea of what the data would look like if I only had a point for every minute.
Is there a macro that I could write, that would hide every cell except every 60th one? I was thinking that I could hide it based on the time. What would the code look like if my time was in 00:00:00 format? It's increasing, so I need it to hide cells that aren't equal to XX:XX:01, for example.
Macro that would insert multiple pictures at once into one column with two rows per page (so that only two pictures are on each page) for word?
If so, would there also be a way to make it to were photos would have a caption box underneath each photo that list them as "Photo #1: Photo #2: Photo#3:" ect...
I know this is quite a task to achieve but I'm still relatively new to Macros and VBA and have a ton of pictures to integrate into Word for work.
a code that would automatically lock a cell every time I input a value to it?
View 2 Replies View RelatedI would like to have the current time/date automatically entered into B1 when A1>0 and I want it to be non volitile, is this possible?
View 9 Replies View RelatedI have the following code in a simple userform containing only a label:
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Private Sub UserForm_Activate()
DoEvents
Sleep 4000
Unload Me
End Sub
When I invoke this as a single macro in a blank workbook and immediately change focus by pressing ALT+TAB to enter NotePad the userform is shown and exits normally after 4 seconds.
However, when I issue this code from within a larger macro, and hit ALT+TAB to Notepad, the excel application hangs on the displayed userform until I click back into Excel.
If required, I can happily send you the code as an attachment.
Need the code which would allow me to create a macro where when data is added into an excel sheet, it automatically adds in the date and the time?
View 2 Replies View RelatedI work in a sales team, and am currently planning the new year of sales spreadsheets (tracking prospects and orders) These spreadsheets are linked in both directions to the Sales Director's summary spreadsheet (so that she can set the targets, and also provide a summary to the MD). She has asked me whether it is possible to put a formula in that gives the date each line (1 line = 1 prospect) was updated (so that she can see whether information in the line is current / a week old / a month old etc)
Effectively, what I need is in column A a formula which references columns B-Q and if any of those change, puts in the date of change. Is this possible, or am I going to have to ask the sales guys to do it manually? I have tried to use the =Now() function, but, because the spreadsheets are linked, and auto-update on opening, every time the spreadsheet is opened, each line goes to today's date.
The previous threads that I looked at suggested either: volatile time stamp in shared workbook
or
That is bad design, Enter =NOW() to a single name cell named cell and use date =MyD-T in ALL cells needing the Date & Time. Where MyD-T is the named cell. I would advise STRONGLY against using Manual Calculation as it's NOT good spreadsheet design and a mistake waiting to happen.
if i have data from A1 to A10 and they are changing every 10 sec.
i want to display them one by one in message box every 10 sec or 1 min.
We have one shared excel workbook and it is used by many people (more than 20 simultaneously), is there any way to auto save & close the workbook (session) if a user is inactive for specified time.
View 2 Replies View RelatedI have been trying to formulate a condition to fill up my timeline by checking the start and end times and date of jobs.
In my attached worksheet, I have an example (which was done manually) what I would expect the timeline to look.
[URL]...
For example,
SLIS900H has a start of 6/8/2014 11:54:05 AM and end of 6/8/2014 12:03:15 PM
As such, the TimeLine entries 06/08/14 11:00 and 06/08/14 12:00 would be shaded (or at least have some indication that it is to be shaded). After which, the Main Task from which SLIS900H belongs to (TSOH Extraction), would also have its Timeline shaded.
I have got a spreadsheet which is being used as a database. I would like the spreadsheet to close automatically if the user has not "touched" it for a specific amount of time (say 1hr).
2 scenarios:
a/ The user is working in Excel but with another workbook.
b/ The user has the excel spreadsheet open but is working with another application, say Word
I experimented with Workbook_WindowDeactivate but I do not know how to stop the process if the Workbook is reactivated (Maybe a DO ...LOOP calling a function returning a True/False statement on the event Workbook_WindowActivate !!). My way of thinking is the following
Workbook is deactivated
Start a timer
If the workbook is not reactivated with 1hr, save and close (no user intervention wanted)
Else stop timer
Repeat process
I have a problem with one of my files. Each time I open it up, the listboxes keep getting smaller and smaller. I have no idea what is causing it.
View 9 Replies View RelatedIs there any way that I can have a column of cells change the entered 4 digit to a time format? E.g. when somebody enters 1212 in a cell it will automatically convert the entered numbers to 12:12
View 9 Replies View Relatedi need to put a date stamp when a change is made in b3:b31 into e3:e31 for each row also i need to put a date stamp into g3:g31 when a change is made in F3:f31 i try to use 1 "worksheet-change" and it is fine once i use 2 i get Ambiguous Name Detected errors
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("b3:b31"), .Cells) Is Nothing Then
Application.EnableEvents = False
If IsEmpty(.Value) Then
.Offset(0, 3).ClearContents
Else
With .Offset(0, 3) ............
I am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies View RelatedI am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies View RelatedI have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
I ran a Home Service Massage, with ten massagers and it's continually growing. I know I'm supposed to use a database for this, but I'm not very good in creating one. I am however confident in using MS Excel, so in a much as possible, I only want to use MS Excel, and strictly use formulas (if I can get away with it).
Anyway, I keep customer records in one tab, and all their personal info is listed there. There are two types of columns, which I'd like to call 'static' and 'automatic'.
Static columns includes Unique ID (number), Name, Address, Phone Number, etc.
Automatic columns, by the term I used, is filled automatically. This includes the total number of hours they have availed the massage from us, the names of massagers who serviced them, --- and my biggest issue --- the date of last massage. I can manually input this, but I normally forget, so I want this filled automatically.
Aside from customer tab, I have one tab for each massager. First column is the date, then 48 columns for time. Starting from 8AM, 830AM, 9AM... 730AM. Hence I have 48 of them. Each column is equals to 30mins of massage availed. I copy and paste the Unique ID from customer tab.
so A2:A32 are dates, and B2:BC50 is where I copy paste the unique ID. B1:BC1 are time labes.
Is it possible for me, just by using formulas, to populate the 'last massage date' column?