I have a large spreadsheet, and here's what I'm trying to do:
In M2:M584 are numbers sorted in descending order from 114 down to 47. I'd like a formula in which I can calculate the average of the values in Column D for only those rows that have values between 80 and 89 in Column M.
I have used this board quite a bit, however I never have registered an account with mrexcel. Ive tried searching the internet and your forums for help with this issue and have not had a success getting the results I am looking.
What I am trying to do is get an AVERAGE from cellAD only IF cellW is with in a certain month, AND if Cell U has a certain name (lets call it trainer for now)
and if its possible (would really help) to also include :
AND IF cellV is Course name X
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.
I was going to create a summary page and reference column d.
The following just gives me the min, I want the min average if possible:
I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?
=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)
I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.
I'm using the formula =AVERAGE(B16:L16) to give me the average.
However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.
Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.
Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.
so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.
My objective is to replace a text string with a numeric variable. The string has text values such as US, Canada, Germany, France etc, There are about 15 such words in total. Each row will have a different one of the 15 text strings.
Each text string has a corresponding number, which I want to use in various formulas throughout the spreadsheet. The numbers are located on a separate worksheet (“Match Rate”), within the same workbook. I obtained the numbers from a formatted report, which I simply pasted into the second worksheet. Due to the complexity of the report, I can’t reformat the numbers to allow use of the VLOOKUP function.
I created the following function, but unfortunately it doesn’t work. Can you help, please?
I’d like to stay with a VBA solution, since a simple if/then sequence such as this is an excellent introduction to the powerful world of VBA... (it just doesn’t work, yet). I suspect the problem is in the calls to the Match Rate Worksheet.
Ok. Here's what I'm trying to do. I have a drop down menu of certain providers located on cell F5. Each one charges different rates per day located on another sheet. Here's the kicker two of those providers charge different rates depending on the amount of days. Those two are UASC and CMA. For the First 5 days they charge one rate and after the 5 days they charge an increased rate.
I'm trying to have one cell located on the first sheet display this information with all the proper calculations. The below formula gives me a false value. I'm not even sure if it works. I know a little bit of excel through some intro courses in college but I'm not sure if a formula like this would work. I know laugh it up.... : ) but I'm not too saavy with formulas....
I have a total of 30 nested formulas that (ofcourse) dont work in excel.
Here is an example of the first 7 nested IFS
(1) IF(MID(A7,8,9)="GIR",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0)),
(2) IF(MID(A7,8,9)="NL",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0)),
(3) IF(MID(A7,8,9)="BE",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0)),
(4) IF(MID(A7,8,9)="AT",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
(5) IF(MID(A7,8,9)="DE",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
(6) IF(MID(A7,8,9)="PH",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
(7) IF(MID(A7,8,9)="AUBE",INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
I tried this code but it is not working.
Function LookupRetrieve(pVal As String) As Long
If pVal = "(MID(A7,8,9)="GIR" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="NL" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="BE" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="AT" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="DE" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="PH" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
ElseIf pVal = "(MID(A7,8,9)="AU" Then
LookupRetrieve = INDEX('ERIS INPUT'!$C$2:$C$65536,MATCH(A7,IF(Reconciliatie!
C$3:C$65536=C7,Reconciliatie!A$3:A$65536),0))
Else
LookupRetrieve = "isingcode missing"
End If
End Function
The formula is a vlookup formula (Index/Match but with multiple criterias such as the use of Mid).
I tried Concatenate but the formula is too long and has a lot of characters and VBA seems better.
I'm building a macro and need to know how to add a nested if-then statement. I need to create a formula in a new column whose value extends to the last row of the database. My base formula is sumproduct(--((A2:A:last row which I need to calculate&B1:B same thing)=A2&A2))
View 9 Replies View RelatedI am trying to make this work. VLOOKUP (B2,"lookup tables'!$A$4:$A$11, if(D2'="ST" 'lookup tables!$C$4:$E$11.
I am attaching the file : MDCC Reservations.xlsx
I am trying to get the Daily room charge.
I am trying to write a formula that will satisfy the following:
C1 and G1 are number values.
IF (cell E1 does not contain any text) AND (G1-C1-12.5>=0), then output (G1-C1-12.5), otherwise output nothing (""). BUT, IF (cell E1 DOES contain text) AND (G1-C1-13>=0), then output (G1-C1-13), otherwise output nothing.
Level RatingA RatingB RatingC Low Medium High
2 x x x x x x
3 x x x x x x
4 x x x x x x
5 x x x x x x
I need to be able to do nested loops. I want to have a criteria that if a person is in LEVEL 2 and RATINGC and HIGH, then take the value under that.
Im needing to achieve what an 11 argument nested if would manage, ie: ...
View 2 Replies View RelatedI'm trying to build this formula and I'm only half way through it and it already isn't working.
Column D - can be 1, 2, 3, or 4
Column E - can be any number
If column D is 1 or 3, then the VLOOKUP should look up column E and point to the answer in column 4 on another worksheet (Companies in this case). If column D is 2 or 5, then the VLOOKUP should look up column E and point to the answer in column 5 on another worksheet (Companies in this case). This is what I have so far, just trying to get it to recognize if it is a 1 or 2:
=IF(OR(D2=1,VLOOKUP(E2,Companies!A:G,4)),IF(D2=2,VLOOKUP(E2,Companies!A:G,5)))
What is making this not work? I'm getting a false. But before I added the OR, it worked for the D2=1.
I'm hoping someone can help me sort this out. I have a formula I need te determine if a TAT was 'met' or 'missed' and it has multiple criteria. Here is the formula I am trying to get to work:
=IF(AND(I2="Amendments",F2<=3,IF(AND(I2="Renewals",F2<=1,OR(D2<=G2)))),"Met",IF(F2="n/a","n/a","Missed"))
I've been able to get separate pieces of the formula to work correctly, example:
=IF(AND(F2<>"n/a",I2="Amendments",F2<=3,OR(D2<=G2)),"Met",IF(F2="n/a","n/a","Missed"))
but when I try to combine everything into one string I can not get it to work.
I seem to be having trouble creating a nested loop. It seemed simple enough in my brain holder, however, in real life...Well I am here aren't I. Here is my
View 2 Replies View RelatedI am trying to create a nested IF function (has 5 IF statements), however,
every time I put the brackets at the end of the function, it puts a little .
next to the false answer, removes the brackets and comes up with an error
message?
This is only happening on one particular PC, when I create the same formula
on other pC's, it works fine so I know my formula is correct.
is there a setting on the PC that must be wrong?
I am trying to write a function such that the data returned to a given cell
will vary depending upon the data entered into another cell. For example:
If A1= 105, then G1=20; if A1=106, then G1=15
I have more variables for A1 than 7, so I don't think that nested if...then
statements would work. Can I do this using VLOOKUP?
I have a simple Staff Rote which is fed by data on Time Sheet. Currently it is working ok with two definitions;
T : Time
B: Break
If I introduce a 3rd and 4th definition like;
A: Leave
X:non working day
formule will get even more complicated.
Is there a way of simpifying this with a code and introducing the new definitions.
I have a rather large formula that I put together and it's shown in column 'C' in the small sample file I have attached. I'd like to add one more criteria such that I avoid duplicate solutions in column 'C'. i.e. I only want the first occurrence of a group.
The formula works fine 'bucketing' the first entry. If I have an solution in C I want the formula to not give me another answer if the cell immediately above has an answer. In other words, rows 11 and 15 would be blank because rows 10 and 14 have an answer.
I've tried inserting another criteria in the AND statement, like ISBLANK for the cell above, but I can't get it to work. What am I doing wrong, OR is there a simpler solution?
I have an assignment in which I have to use nested, IF, AND and OR functions. Does anyone know the syntax for this kind of function? Basically I have to determine leave time based on years of service and whether the employee is full time or part time. Part-time with less than 1.5 years of service = 0 days of leave Part-time over 1.5 and full-time under 1year = 3 days of leave and full time over 1 year = 5 days of leave. I know how to do a nested function, but I have not worked with both an AND and OR together.
View 10 Replies View RelatedIF/OR function below is not working
=IF((OR(B14=1,2,3,12,15,16)),"A",IF(OR(B14=4,5,6,7,8,9,10,11,13,14,21,40,41,42,43,44,45,46,47,50,51, 52,53,54,55,56,59,60),"B",IF(OR(B14=20,30,57,58),"C",IF(OR(B14=33,31,32,34,35,22),"E F OR G",IF(OR(B14=36),G,"ERROR")))))
Im using nested if to compare one value and if its true it should count the values in the specified column. I tried this formula...
COUNT(IF($C$8:$C$1000="Defect", IF($J$8:$J$1000 <>"Ignored",$A$8:$A$1000,""),""))
Im checking whether its a defect and if its defect thenchecking the status whether it is ignored if so im counitng the number of defects by counting s.no in column A.
I have the following formula in a spreadsheet:
PHP Code:
=IF(A6=Controls!$B$3,IF(AD6="CLEAR","CLEAR",IF(AND($AB$5>="5",$AB$5<="6",MyB!$J$2=0,$AA$5="0:0"),"BACK",
IF(AND($AB$5>="10",$AB$5<="11",MyB!$J$2=1,$AA$5="0:0"),"BACK",
IF(AND($AB$5>="15",$AB$5<="16",MyB!$J$2=2,$AA$5="0:0"),"BACK",
IF(AND($AB$5>="20",$AB$5<="21",MyB!$J$2=3,$AA$5="0:0"),"BACK",IF(OR($AA$5<>"0:0",$AC$5="HT"),"LAY")))))),"")Â
I am trying to amend the final IF to the following but cannot integrate it correctly.
PHP Code:
=IF(AND(AE6="SETTLED",OR($AA$5<>"0:0",$AC$5="HT")),"LAY")Â
I think its something simple I'm missing here. I have a range of stock prices (Range("E3,E4,E5,E6")) what I'm trying to do is use for each next loop to calculate the number of shares that I could trade. and place those shares in a range of cells adjacent to its corresponding price (Range("G3,G4,G5,G6")). I think the problem is in my loop statements but I can't seem to find it . Could someone kindly show me the error in my ways.
Code: ...
I searched on this and didn't find what I was looking for. I want to count entries that have critieria I specify in two different ranges. Is countif the way to do this?
View 9 Replies View Related