I have my data in a pivot and need to average some of the data and ignore duplicates, blanks and numbers... another complication is that the data I want to average is in two separate columns (first and last name). I also need the average to be subtotaled based on my pivot...
View 9 RepliesIs there a way to average and counta the values in the row of a each category in pivot table?
Example
Pivot Table
Fruits
Grad Total
China
UK
[Code]....
Is this possible?
Fruits
Grad Total
China
UK
USA
UAE
[Code]....
With Pivot Tables, there is the ability to add Grand Totals to Rows or Columns, but I want to add Averages to the end of the row instead. Can this be done? I have tried Calculated Fields but can't get the right result. Auto Merged Post;Hi again,
After I posted this I found another similar post, where the answer was that the "Average" calculation has to be done outside the pivot table, ie. there seems to be no way the pivot will give averages for rows, only grand totals.
If this is the case then I will have to work around it.... I was hoping it could be done within the pivot because I have graphs linking to the pivot and they all go spak when I update the pivot with different data. The number of columns will change all the time, meaning the average will need to be reworked. Just trying to save time!
I am trying to get some averages using pivot tables. However, whenever I set up my pivot table and then go to field settings and pick average, all I get are # DIV/0 errors in all the boxes where there were numbers.
View 4 Replies View RelatedOn a pivot table, I want the grand total to be the average. When I code it, the code changes all the values in the column to an average.
if a person's % for April is 95% & the sum of all the people in the table is 1924%. If I change the grand total to average, the person's april % changes to 19% (which is an average instead of a total.
[Code] .....
How can I get a pivot table to calculate the average of the monthly totals and not the average of all the raw data.
Below is a pivot table of the data on the left. When the pivot table averages the months it calculates the average of every single record, 48.83. How can I get it to average the monthly totals:average(apr,may,Jun)= 179.05
Date cost Sum of cost Years Date
4/1/2011 -75.00 2011
2011 Average Monthly Average
4/11/2011 -58.88
Apr May Jun
[Code] ........
I created two pivots:
1 provides sales data for companies in a time period,
2 provides market share data for companies in a time period.
Both pivots can be filter by page fields country and category. Now i want to calculate 4 average market share values (because i have 4 defined periods): 1 average MS in period 1, 1 average MS in period 2, etc. In this average i want to exclude companies that are not active in a certain period (pivot table shows MS = "0%") and companies that totally not active in all periods (pivot table doesn't shows market share data at all after a certain selection of the page fields).
Attachment : calculate averages from pivot table.zip
I am working on a pivot table and am having issues with our subtotal: Sum / Averages.
The pivot is setup as so:
excel help.jpg
The problem is I need the average column to average the viewable area, and not from the data, so for example G28 should be 55 and not 6. Also, I need the Average of the fill rate to be a value.
I have a column in my pivot table with values that are formatted as percents. I am trying to make the grand total reflect the average of all values in the column, but it keeps showing a sum of all values.
Example: the values in the % column are 90%, 100%, and 110%. I want it to show 100% (the average), but it is showing 300% (the sum)
Capture an average from the Grand Totals in a Pivot Table? If so what are the steps.
View 5 Replies View RelatedI created a custom formula for a pivot table.the existing columns are weekly averages.I made a formula to calculate the average of 5 individual weeks.But when one of the value is blank.Blank cell is considered as zero.and hence the final average is wrong.
View 2 Replies View RelatedI created two pivots: 1 provides sales data for companies in a time period, 2 provides market share data for companies in a time period. Both pivots can be filter by page fields country and category. Now i want to calculate 4 average market share values (because i have 4 defined periods): 1 average MS in period 1, 1 average MS in period 2, etc. In this average i want to exclude companies that are not active in a certain period (pivot table shows MS = "0%") and companies that totally not active in all periods (pivot table doesn't shows market share data at all after a certain selection of the page fields). Check out my attachment too to symplify this question. How how i formulate this formula?
View 4 Replies View RelatedI have a problem when Im trying to calculate averages in my pivot table. I dont know how to handle my missing values. If I leave them blank I cant get the average at all because the values end up under the dates instead of in a column next to the dates where I want them to be. If I write 0 it uses it as a value, eg 2+2+0 and i get 1,33 instead of 2. Also the zero could be a value for some of the parameters, so it's no good.
I am new to pivot tables.
I am trying to find expected proportion of code per country by looking at current values. I have a list of countries and associated classifications (0-5) with counts, similar to as follows:
Country
code
count
USA
1
65465
USA
2
54651
USA
3
65411
[code]...
I am interested in creating a pivot table with the average of each code as a proportion of each country. The final table would be expected proportion of codes. The pivot table for this set would look like this:
Row Labels
Average
1
5.4%
2
3.9%
3
4.7%
[code]...
Mean per code of the proportion of code per country
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View RelatedI have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then
Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X)
end if"
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedI have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
View 2 Replies View RelatedI have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
My input data for Pivot table has a column named "Month". The month values are like April 07, April 08, Nov07 in random order for period between Jan 07 to Aug 08.
When I create a pivot Table, this column is sorted alphabetically (April 07 is followed by April 08) but I need it to be sorted in the ascending order with respect to month (April 07 is followed by May 07).
I further use this data to plot a Pivot Chart. There is another issue here. I want to use separate colors for each series. I do not know how to achieve above 2 things.
I have a pivot table that I created and now I want to use the same pivot cache to create another pivot table instance on a different worksheet. how can I do that? My first worksheet gets saved as "OO By buyer" and now I want to create a new worksheet and drop the next pivot there.
View 1 Replies View RelatedI'm not grasping the Pivot Table correctly. I've written code to create a sum of values based on a worksheet. Specifically:LocationIDDeptSum of Hours Worked. Location, ID and Dept are rows. This effectively provides the aggregate values that I need based on the row groupings.Here's where this is falling apart. I need to create a new worksheet based on these values. I assumed the three row values - Location, ID and dept - would be in a hierarchy. It's possible they are, I just can't figure out the object model.
When I loop through the PivotItems collection of the PivotFields("Location"), I get what I need. However, I'm unable to determine how to loop through the child values (just for that location). PivotFields("ID") returns all IDs. I can't figure out how to return only the child entries for each pivot item. GetPivotData hasn't been very useful for this. As far as I can tell, GetPivotData, while its return type is listed as Range, throws an error when more than one cell is returned. Worst case, I suppose I can just parse the data in the DataBodyRange of the pivot table - maybe not, I haven't tried that. I'm hoping there's a way to iterate through these collections, but based on what I've seen from Google searches, there may not be. Does my pivot table need to be rearranged? I suppose I could also just dump this data into a data table
My macro is designed to look at a summary source tab and create a new tab for each unique project number. It then creates a pivot table from five different source detail tabs and filters on the project number. If a tab already exists it selects the tab and moves on to the next project number. There are six pivot tables created for every project.
New data is added each month to the source tabs and I have a macro to delete all pivot tables and the macro will recreate the pivot tables when ran again.
Issue: Running out of resources At work I'm limited to the use of Excel 2010 (32bit) so I'm restricted on 2GB of memory. At home I ran the file successfully (64bit) and it was around 3GB of memory.
My macro creates a new pivot cache for every pivot table where as I'm trying to only use 6 pivot caches in my coding. I kill it half way through and it's around 100+ caches causing unnecessary usage of memory.
Fix / Solution:
Correctly code the vba to only create six caches and code the rest the pivot tables to use that cache.The only difference in the Pivot Tables is that it’s sorted on the Project Number.
Code:
Dim VBAPPPC As PivotCache
Dim VBAAPPC As PivotCache
Dim VBAPRPC As PivotCache
Dim VBAEXPC As PivotCache
Dim VBAMJPC As PivotCache
Dim VBAIVPC As PivotCache
Dim VBAPT As PivotTable
[code]...
1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
Sub Macro1()
ActiveSheet.PivotTableWizard SourceType:=xlPivotTable, SourceData:= _
"PivotTable1"
End Sub
Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
I have a list of items and their associated quantities, many items appearing multiple times. I need a concise list that summarizes each item and sums all of its quantities.
The obvious solution is a pivot table. However, I update this list frequently and for some reason the pivot table is difficult to update. is there a function or simple vba code that I could put into this workbook that would work better than my unflexible pivot table?
I manage a team that quote for business. They are targetted on number of quotes per month but then also wins per month, however a win may come a number of months after the original quote was generated.
They work off a spreadsheet where they log:
Quote date (And month)
Quote Value
... customer info etc
Win month (against orginal quote information)
Win value (against orginal quote information)
I started writing my pivot using the Quote month as the main reference point, IE Quote Month in the Row, and then put all the data in the central drop data section... However, there are two immediate problems with this:
They are targetted on quotes generated per month, some business won has come from last year, which they are lifting from the old spreadsheet and puttin in my new one... meaning that quotes they generated in Oct 2012 are now showing up as quotes for October this year.
If the wins span a number of months they are showing in January (if quoted in January) and not in March (when actually won)
Is there a better way of writing my pivot table??? There must be... ideally what I would like is half the table referencing the Quote date and half referencing the order date... but I don't know how to do this? I could probably do this with pages but I would like to show all on one sheet...
I have 12 months worth of data in twelve separate workbooks each with a pivot table, I have copy/moved the pivot table tab from each into one workbook so now I have a workbook that consists of 12 tabs each with a pivot table. What I would like to be able to do is create a summary table with the full years data; where I am running into problems is that each months table has slightly different row and column counts and labels making any formula like =sum([sheet 1 cell a1]+[sheet 2 cell a1]) problematic.
View 3 Replies View Related