I'm pulling data into some graphs from multiple sheets. The data I'm after is in the same place in each of the sheets, and the sheet name is varying only in that they refer to different dates, such as "01-11-13", 02-11-13 etc...
How would I go about dynamically picking up the sheet name. and referring to it?
For example if I have a column with all the different sheet names in it:
Col AA:
31-10-13
01-11-13
04-11-13
etc!
Is it possible to access other tabs on my spreedsheet dynamically? =COUNTIF(July!$F$4:$F$200,$H7) not dynamic
A1 = July. =COUNTIF(A1!$F$4:$F$200,$H7) dynamic. but how is this done in Excel?? Is it possible?
I have a challenge I'm trying to surmount. I have an excel sheet in which I want to be able to select Zone codes from a drop down, click on a link "search" which takes me to a place in the document that has been named according to the Zone code i pick in the drop-down. I want to achieve this using only formulas as i'm distributing the file to a wide audience who are not versed enough with computers to know how to enable macros.
View 3 Replies View RelatedI'm reading data, from specific cells off a closed workbook. When the sheet that needs said cell data is activated, it automatically opens the workbook and references the sheet nessecary. The issue I've come across, is I now need to access another workbook (Easy to open) with 12 sheets 1 for each month, and only read from the worksheet of the actual Month...
Kind of lost on how to possibly make this work. I basically need something like:
=location/[workbook.xls]Month(Today())!cell
Is it possible to declare n variable names dynamically in a macro? For example: Cell A2 in Sheet1 contains the number of variables to be considered in the macro (n). I would like all the variables to take names in the macro from node1 to noden using the dim statement. I tried running a for loop:
View 14 Replies View RelatedI have 100s of name ranges in my spreadsheet. I am using a series of drop down boxes for the user to select the info that they want to see. Based on the dropdown box, the macro "dynamically generates" a range name from which to pull the info.
For instance, if they Select Manager = Terry, Analyst 1, and Month = Jan, then the range name would be JanTA1
The if statement would dynamically create this name by concatenating the info
If manager = Terry
mnger = "TA"
if analyst = 1
anlyst = 1
if month = Jan
mnth = "Jan"
rangename = mnth & mnger & anlyst
So, I am dynamically creating the range name based on user selections...then to display it, I want to set the display cell = to the value
Range("display cell").Value = Range(rangename).Value
The problem is, I am getting an object error every time I try to refer to a range this way.
If I type:
Range("display cell").Value = Range("JanTA1").Value, it works
I do have a data set from A1:C8 as follows:-
Brand Name(A1)Sales Value(B1)Margin(C1)Levi's100002000Arrow150002500Allen Solly120001300Hanes80001000John Miller250004500Disney280003200Ray Ban180002100
The above brands are categorized as follows:-
Brand NameProposed CategoryLevi'sConsignmentArrowBrandAllen SollyBrandHanesBrandJohn MillerPrivate LabelDisneyBrandRay BanConcessionaire
I would like to put formula from D1:D8 in such a way so that the Proposed categories are extracted automatically through formulae. This will help in getting the contribution calculated from different categories.
Brand Name(A1)Sales Value(B1)Margin(C1)Category(Desired Result)(D1)Levi's100002000ConsignmentArrow150002500BrandAllen Solly120001300BrandHanes80001000BrandJohn Miller250004500Private LabelDisney280003200BrandRay Ban180002100Concessionaire
I have three different sheets, each with a column of names, titled "list1, list2, list3." I also have a fourth list of names on a sheet titled "masterlist." I am wondering if there is any way I could cross check the three lists against the master list to see if any names appear on the master list but do not appear on any of the three lists. Is there any way I can cross reference the master list with each of these lists?
View 2 Replies View RelatedI have a large dataset that I need to push into a dictionary, into that dictionary I also have to create other dictionaries and this can go on until I fill the entire dataset into the dictionary. The problem is that I do not know beforehand what the key names will be so I need to find a way to get the key names.
I have the following test code:
Code:
Dim player As New Dictionary
player.Add "val1", "hello123"
player.Add "val2", "piet123"
[Code]....
how to get reference the key in a nested dictionary not using the keyname?
I have a set of worksheets (Sheet31 through Sheet49 by codename) produced by a machine in the lab. I want to create a summary sheet that references cells in those worksheets.
Rather than go through the annoyance of doing this manually 40+ times I'm working on creating a macro to populate the summary sheet for me.
This is what I have so far
For J = 31 To 49
ResultSht = SheetJ.Name
Sheet1.Activate
ActiveSheet.Range("A4").End(xlDown).Offset(1, 0).Select
It hangs up on the "SheetJ.Name" however. My objective is to be using the object SheetJ, where the object SheetJ is the codename of the results sheet I'm trying to reference (for example, in the first pass through the loop it would be Sheet31). Could someone point out my mistake in this object reference?
I am writing a macro to consolidate data from different worksheets in more than one Summary Sheets.
My workbook has quite a number of worksheets, from different department e.g. OPS001, OPS002,OPS003, ADMIN001, ADMIN002, ADMIN003 and so on.
I want data from OPS001, OPS002 and OPS003 to go on one sheet e.g. "Summary-OPS" and data from ADMIN001, ADMIN002 and ADMIN003 to go on the other sheet name "Summary-Admin"
When I am working on Summary-Ops sheet I want to copy data from sheets starting with name "OPS" and so on.
Here's the data table being referenced
Rank
Week Ending
Name
Value
1
1/1
Apple
100
[Code] ........
Now on another sheet, I want to return the top two 'Name's and their values like below:
Name
Value
There is a fluctuating amount of rows in the first table, too. So what formula can I use to return the correct names and values on another sheet?
I'm thinking it will use some form of concatenate for the first and use a sumifs function for the value column..
I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedCan I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedCode:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
I am using Excel 2003 and Windows XP.
I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:
Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.
What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.
I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was
=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)
So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.
My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.
Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?
I have a list of names in a single cell. They are all seperated by a comma, then a space. Example would be: John Smith, Steve Wilson, Wallace O Malley, etc. What formula could I use to pull out the names individually, starting from the farthest right?
View 2 Replies View RelatedI'm trying to sort out a list of names from a website that publishes names in the following format:
DOE John
VAN GOGH Vincent
DA VINCI Leonardo
NADAL PARERA Rafael
JIMENEZ RODRIGUEZ Miguel Angel
What I'd like to do is get the names in the following format
John Doe
Vincent Van Gogh
Leonardo Da Vinci
Rafael Nadal Parera
Miguel Angel Jimenez Rodriguez
Basically all the last names - which are all capitalized - would be moved to the end of the text string. Of course any leading spaces should be removed and I guess using the Proper() function, all capitalized words could be capitalized in a standard way.
I found the following function, here: [URL] ...
but what it does is just take the capitalized words and separate them into a separate cell, which is not all of what I want.
create a script that will replace the names in column A on sheet1 from a Master sheet in the same workbook?
The problem is that different users are entering data on sheet1 col A in different ways example someone may enter Johnc or John C Or John What I want is for something to run down col A on sheet1 and look for the like name on the master sheet if the name matches then do nothing but if the name is like another name on the master sheet then replace the name if they are almost alike.
I need to create a function that selects 4 names randomly from a list of 15 names and displays the 4 randomly selected names in the one cell. Also, you cannot repeat the same name in that cell, (i.e. bob cannot be selected twice in his group of four)
View 1 Replies View RelatedI need to make this macro read FOLDER names instead of FILE names. When I posted this question yesterday to get this macro, I wasn't told that each file in its own folder. I need the folder names now.
_____________________________________
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Ford"
.SearchSubFolders = False
.Filename = "*.*"
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
Cells(i, 1) = .FoundFiles(i)
Next i
Else
Cells(i, 1) = "No files Found"
End If
End With
End Sub
I have a link
='S:2014DomesticATL[ATL-BP Eval-2014-04.xls]Business Partner Evaluation'!F$13
Now i have to compile 3 years of data for 200 airports so changing the month and year for every airport would be a challenge. I can do Replace all and change the year and month but instead of that i was thinking if i could have the year and month on one row and connect the links to that cell so that whenever i drag the cell my link changes
im looking at
2014DomesticATL[ATL-BP Eval-",D2",.xls]Business Partner Evaluation'!F$13
where in D2 i will have 2014-04 . But this formula doesnt seem to work. Is there anyway i can do this ?
I have a list of about 3,000 names and places of work, in two columns. What I want is to have the place of work in the first column, and then all the employees along that row.
There must be a simple solution to this, but I have been banging my head on my desk all morning trying to work it out. All the places of work are sorted, if that makes any difference.
I have a cell range of L3:N3 on Sheet 1 and on Sheet 2 in A1 i have the value of N3 of Sheet 1.
Now, if I move L3:N3 to eg. R10:T10 I want the value A1 ( Sheet 2 ) to be updated to T10 ( Sheet 1 )
Right now, it wont update dynamically, value of A1 stays at N3...
I basically am trying to just reference another cell (from a pivot table) from another sheet. ='SHEETNAME'!G5
But I Need the G to change... I basically need
='SHEETNAME'! + E29 + 5 to equal
='SHEETNAME'!G5 assuming G is in E29 but am not sure how to do this.
The other option is to use =GETPIVOTDATA("Sum of Amount_19",'SHEETNAME'!$A$3,"Label","Title") but I need "Sum of Amount_19" to change based on another cell, lets say F29.
I'm trying to dynamically set the print area for a given worksheet. I use the code below and it works perfectly when it's executed upon opening the tab; however, the worksheet has filters which may lengthen/shorten the required print area.
Is it possible to execute the code below when the user selects print rather than when opening the tab?
[Code] ......
In the attached sample workbook I am trying to add the vendor number down the column H for each PO. I have copied a few of the numbers into the column, (in red), to show the desired result.
Basically, I will have a report daily with a variable number of suppliers, and variable PO's for each supplier. I need to add the vendor # to each row.