I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I have a file with multiple column headers and data entries (dropdowns) into the rows. I wanted to create a secondary sheet...like a pivot table..if the vertical and the horizontal are both in the two columns selected it returns a value in the table.
I would use a pivot table, but it is a data entry sheet and the pivot table does not bring up all the horizontal and vertical values unless they have already been selected in the sheet.
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257
Flight, Last Post
3k111, Singapore
3k131, Singapore
AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
I have a sheet1 with following column name Ab,Bb,Cb,Db,Eb,Fb and sheet two contains Ab,Xc,Eb,Sv,Db,Fb,Gm,Cb,Hb these headings are on 7 line of both excel sheet.
Now I want to check each cell under column name Ab in Sheet1 and compare it with all the cells under column name Ab in Sheet2. If both matches then update Cb,Db,Eb,Fb of Sheet1 to the corresponding columns in sheet2 for that column name.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have a large data set which is basically just transactions on accounts by date and I want to return the transactions in date order by account number. I've attached an example where sheet 2 is the transaction listing and sheet 1 is what I'd like to return.
View 3 Replies View RelatedI need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies View Relatedtable1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
I have two sheets. Sheet1 contains two columns Site_Name and Site Code. And Sheet2 contains Person Name and Site Name. So i need the site code values to be mapped in sheet2 from the sheet1.
Is there any function to do this ? Find the input docs , am attaching here.
Sheet2.xlsx
Sheet1.xlsx
per attached I'm trying to establish that values in one sheet are present in another. The MATCH function isn't returning anything.
View 5 Replies View RelatedI need a macro to start at cell "A1" on sheet1 and then find that same value on sheet 2 in column B. Once it finds that value in sheet 2, the code would copy the row related to "A1" (A1:H1) into the row on sheet 2 with the value matching "A1" from sheet 1. Once it has done this I need it to do the same from A2:A598. I thought this code below was working but it seems to erase a row from sheet 2 if it is not present in sheet 1. I need the macro to only update the row if the information in column A on both sheets is the same. Here is the code I am using
Code:
Sub FindStr()
Dim rFndCell As Range
Dim strData As String
[Code].....
I am looking for a VBA code which can be used to interpolate between values at a given interval and return these values to an excel sheet. I have a list with X and Y values and need to interpolate (linear) between two X points to return intermediate values for Y (interval between values is defined by the user in a userform). The code is to continue with interpolation between two consecutive X points until it has reached the end of the listing. In the example only several points are given, but the list can be longer or shorter than given in the example. The results need to be returned to a new sheet.
View 4 Replies View RelatedI have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
My tab ("dados"), has 21 columns, i need clear only column "L"
VB:
Sub CompareRemoveDupes() ' Stanley D. Grom, 04/06/2012
' [URL]http://www.ozgrid.com/forum/showthread.php?t=164160[/URL]
Dim wP As Worksheet, wN As Worksheet
[Code]....
I'm looking for a formula that will match columnA sheet1 with columnA sheet 2 and where theres a match (alphanumeric) will copy the whole of the row in sheet 2 onto an entire new sheet.
View 3 Replies View RelatedI need to do a vlookup of the values of Sheet 1 Column A (Ref) in Sheet 2 Column A (Ref).
The results will be the concatenated values of Sheet 2 Column B + C + D + E to be displayed in Sheet 1 Column B (Address).
I'm not sure how I can do this using formula.
I've attached a example.
I am looking up the largest value across various sheets (1 to 99) with the following formula:
=LARGE('1:99'!$B$1:$B$50;$C3)
That correctly returns the largest value in range B1:B50 across sheets 1 to 99.
However now I want to know the sheet name of the value above in a seperate cell, let say in: A3.
I'm using excel 2010.
I'm trying to find a way to:
Use a referenced lookup value from sheet "A", to return values, from several columns in sheet "B"
Things to note:
a) The lookup values sometimes repeat. I need all the associated values with each repetition as well.
b) The lookup values in sheet "A" are a comprehensive list, sheet "B" also contains some of these values but not all. Essentially, what I need to do is find a way to lookup each value in an account numbers column in sheet "A", against a different account numbers column in sheet "B".
If that value occurs in sheet "B" I want it to return the values from Columns X, Y, Z, (I want these values returned in sheet "A".
If that value does not occur in sheet B, the corresponding cells should remain blank.
If the lookup value occurs multiple times, I need all the corresponding values from each of X, Y, Z columns.
how I can keep a running total of information added to a different worksheetS. They would not always be the same peson ID so I would like to return a match on any unique ID number found on multiple worksheets and add their values on a master front sheet. i.e this becomes a running total of items purchased per ID number.
View 4 Replies View RelatedIn the attached worksheet I have UserForm2. When I click on open compare form button on the menu sheet it opens UserForm2, I would like the information I select in the first 7 combo boxes Vegetable - Ball on UserForm2 to loop through the data in the database sheet Columns A:G and compare the entries to the non empty/not blank cells in each row. If the form contain data that matches all the non empty/not blank cells in a row in the database sheet then it is a match and should show the label and display the message. If the form entries does not match to the non-empty/not blank cells in any of the rows on the database sheet then do nothing.
The problem I am having is getting it to loop through the sheet and bring back the right results. It is only matching on row 2 of the database sheet when I select cabbage in the vegetable combo box and apples in the fruit combo box . I cannot figure out how to get it to loop through all the rows for the range I want to compare (A2:G7) - I need this range to be flexible so as data is added it will expand to read all added rows.
The code is on the btnSave_Click() for UserForm2
I attached the spreadsheet and I am explaining what I want to do and the expected result.
Fruit
Fruit Type
Vegetable
Games
Toys
Cereal
Ball
[Code] .....
What I want to do is loop through the Database sheet and if the fields on the form contain all the values in any row of the Database sheet, excluding empty cells in the Database sheet, then display a message.
So if on the form I selected Broccoli fron the vegetable combo box, Cricket from the games combo box, puzzles from the toy combo box, bananna from the fruit combo box, grits from the cereal combobox, and baseball from the ball combo box, in the databse sheet tabel shown above the match would be row 6 since the values for vegetable, game, toy, fruit, cereal and ball on the form matches what is on row 6 of the Database sheet. It does not matter what other fieds are selected /filled in on the form, the match should only take into consideration the populated cell in each row of the database sheet.
So, if the user enters Apples in the fruit combo box and Cabbage in the vegetable combo box but had blank or something other than bike in the toy combo box on form it would be a match to the Database sheet row 2, regardless of what the user enters in the remaining fields on the form
If the user enters Berries in the fruit combo box, Blueberry in the Fruit Type Combo box, Carrot in the vegetable combo box, and Grits in the cereal combo box it would be a match to Database sheet row 3, regardless of what the user enters in the remaining field on the form .
If the user enters Apples in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form itwould be a match to the Database sheet row 5, regardless of what the user enters in the remaining field on the form .
If the user enters Grape in the fruit combo box, Carrot in the Vegetable combo box, Cards in the game combo box, and football in the ball combo box on the form it would be a match to Database sheet row 7, regardless of what the user enters in the remaining field on the form.
If the user enters Kiwi in the fruit combo box, Cabbage in the vegetable combo box, and Bike in the toy combo box on form it would NOT be a match to the Database sheet because the Database sheet does not have a row that contain Kiwi, Cabbage, and Bike.
So basically, if the entries on the form match the exact values for all the non-empty (blank) fields for any row in the Database sheet, then it is a match.
-If the entries on the form do not contain an exact match to all the non-empty (blank) fields for any of the rows in the Database sheet, then it is not a match.
-If it is a match show the label and display the message box
-If it is not a match the do nothing
I am currently looking at a simple data set spanning a few years of annual average data. I want to create a front sheet to show people in what year the maximum value was reached for each site but am having trouble returning the values......
The summary sheet is headed:......
I want the formula to say - find the summary sheet max value cell in the main data sheet row 2 (for XYZ) and return the corresponding column from row 1 (year). I've got myself in a muddle trying to create array data from the index function and want something simple. There are only about 30 rows so am happy to manually select the rows in question and repeat the formula entry so it doesn't need to be fancy.
see attached workbook. I want VBA to insert an index/match forumla on sheet 1 to lookup a value from sheet 2. I don't want it to specify a range though. I want VBA to look to see if there is data above and to the left of the cell and if it is true insert the index/match formula. Then it won't matter what row or column I put the headings in.
View 2 Replies View RelatedHere's the data table being referenced
Rank
Week Ending
Name
Value
1
1/1
Apple
100
[Code] ........
Now on another sheet, I want to return the top two 'Name's and their values like below:
Name
Value
There is a fluctuating amount of rows in the first table, too. So what formula can I use to return the correct names and values on another sheet?
I'm thinking it will use some form of concatenate for the first and use a sumifs function for the value column..
I've created a userform that has one ComboBox (ComboBox1) and two text fields. I am trying to get the userform to return information to my worksheet in the same row as the name that is displayed in the ComboBox. This is my VBA code.
Private Sub Cmdpayment_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Sheet4
iRow = Cells. Find(What:=Me.ComboBox1.Value, After:=C5, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ws.Cells(iRow, 12).Value = Me.txtpdate.Value
ws.Cells(iRow, 13).Value = Me.txtpayment.Value
Me.txtpdate.Value = ""
Me.txtpayment.Value = ""
End Sub
i have a workbook with two sheets. lets just call them sheet 1 and sheet 2. on sheet 1 i have data for employees and their current wages and other info. on sheet 2 the data is for compensation scale on three separate columns.......
in order for me to automatically get the data from (sheet 2 B3) the formula for sheet 1 E1 would be: ='Sheet 1'!B3. how do i formulate the equation so that i can do ='Sheet 2'!(C1)(D1)?. in other words i want to specify the column and row from the values declared in sheet 1 column c and column d respectively.