I recorded the following macro which deletes specific buttons and drop downs from a sheet. I would like a macro that can delete all Buttons and Drop Downs without them being specified.
View 3 Replies
I have spent several hours searching the forum but have not been able to find any code that I could tailor to my specific need.
Basically, when I press a button on a 'Util' sheet, I need to cut every row on the 'Source' sheet with 'Closed' in column 'B', paste the rows to the next blank row on the 'Closed_Requests' sheet, and delete the resulting blank row from the 'Source' sheet.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedJust a simple question, how to make a macro:
1. There a 2 buttons, button A and button B
2. When we press button A, button B will be deleted
I'm using the below code which only clears the data, I'd like to find a way to delete the row and also shift the row up.
[Code] ......
I know that this may seem a little strange to request as you can just select the row and delete it, however the sheet is designed as "idiot proof", so I would like to implement this.
Basically, I have a box which states "If you need to delete a row due to incorrect entry, please type the row number here (next cell), and click delete".
I want to know if by using VBA, you can reference the number entered in the cell, and use this to determin the row in which we are required to delete.
-- > I have a single button set-up to delete a diagram
-- > The diagram is made up of 7 parts
-- > If all 7 parts are present the button will work perfectly as is.
-- > If one or more parts are missing I get an error.
-- > I tried doing some error traps but it's not working like I know it should (code below).
--> The button assigned to this macro is "Clear Defualt..."
Currently have a sheet that allows me to pick an item from a drop down list and show me the code for that item.
I already the macros for adding an item to the list via a add button. All this dose is if the item is not on the list i can simply be added into the two boxs and then click the add button.
What i want to do is add a delete button. This is in case someone enters the values wrong then can select it in the list and then click the delete button.
So all i want is to look at the item cell, match to a range and delete the row.
I have added a link to what it looks like as well as the coding i have used so far. [URL] ........
Sub Add_to_list()
'
' Add_to_list Macro
' Adds new item to list
'
'
Range("F10").Select
Selection.Copy
[Code] .......
How do you disable or delete a button in VBA code after the button is pressed?
View 9 Replies View RelatedI am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
During the course of one of my macros running I want it to press the Delete button that pops up? I used to know but can't seem to trip across it. I have attached a screen shot of the Delete button I want to be pressed.
View 4 Replies View RelatedSub OptionButton222_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = False
End With
End Sub
Sub OptionButton223_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = True
End With
End Sub
Sub OptionButton224_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = True
.Shapes("Notch 2").Visible = False
End With
End Sub
i need to modify it so that a selection on the beam input page causes the images to change on the beam output page. Currently this code is in the module section of VBA.
Here I have a listbox, but I would like to know if it's possible to be able to sort each header on the userform when clicking on the header?
Also, how should I also delete some entries with a button?
listbox.xlsm
I have a button (group containing and add and delete button).
I want to identify the row (position of shape/button calling the macro) to enable inserting a new row (1 row down from current row).
Then do the same to delete a row (position of shape/button calling the macro) to enable deletion of selected row.
This will allow me to add/insert rows by the button located at that row
The problem i have is getting the row property (row position of the button eg. TopLeftCell.Row) of the add button. The add button (RowBtnAdd) is a shape within a group (BtnGrp)
I also note that when a group is copied, it has the same shape name as that copied.
I want to keep the add and delete shape within the group (BtnGrp).
I do not want to select a cell or row or enter a row number to delete etc.
refer to sample workbook attached. Currently only has one record row.
I have a list box that shows a range of cells (called emailrange). I want to add a Delete button that enables a selected value in the Listbox to be deleted if necessary (just the cell value not the row).
The code I have thus far is below: ...
I have a command button that upon its click I would like to delete a specific row. I am using a vlookup which is giving me the row of the number I would like to delete. How do i go about deleting out this row?
this is also a radiobutton within the row that I would like to delete out as well. It is not named but it linked to column B within the row that I will be deleting.
I have 9 columns with various data and true/false checkboxes. Column 9 is labelled "Delete" and also contains a true/false checkbox. If column 9 is checked (True) and then a command button is pressed the corresponding row of data is deleted.what would the command button code be.
View 1 Replies View RelatedHow can we delete entire row using VB Code.
say example i want to delete a row having name 'Anis' by clicking on a buttton
is this possible?
I have a spreadsheet containing 100 "requests" which can be made by a user
i would like the option for the user to be able to delete a request should they wish it either by deleting a row or clearing the contents
Currently I have a single column which is full of buttons (one for each row)
when i click the button on row 10 I would like row 10 deleted
when i click the button on row 30 i would like row 30 to be deleted etc
is there a way to do this without writing 100 macros which are specific to each line?
I've been piecing a macro together from different sites and have run into a couple issues I can't find resolutions to. I have a excel doc for tracking paint emissions per week. I would like to have a button on my master tab that will add a row and fill the formatting from the line above across all 60 some sheets. Ideally I would like the same button to first prompt if you want to add or delete rows. When adding rows I would like it to add it above the button (there's 3 buttons and for 3 different sections) and if deleting ask which row to delete. If it can't be done in one button that's fine, I can live with that. The big thing I need is for it to replicate across all of the excel sheets. I've attached a copy of the document
View 1 Replies View RelatedI'm trying to track information pertaining to employees across different worksheets in one excel file. I have one sheet that is the master list of employees. The first column of every worksheet is the same (employees names based on their location) but track different information.
I want to be able to create a macro button that will update all the worksheets if i insert or delete an employee from the master list. When a new row is inserted, the other worksheets should be updated as well with the new name and a blank row to be filled in. And when a name is deleted, the entire row should be deleted as well.
how i might create a macro to attach to a button so i can delete the contents of all VALUE! cells. Either this or have a script in the background so no cell will return VALUE! (or any other error if possible)
I know if i had all the formulae sorted they might not butit's quite a large spreadsheet. The reason for the VALUE! error is text in cells that the formal points.
I would choose to select the delete button. I've created a new worksheet within a workbook, insert text and formatting, and copied to a specific place in the active worksheet. Everything works well except 1. there is a LOT of coding because I recorded the macro and 2. the delete message pops up for every files the macro manipulates. I have to click "delete" about 60 times throughout this macro and would love to be able to let it click its own delete button!
View 6 Replies View RelatedI have a drop down in IE in which four values are there
I will need to select each one at at time to make some change and move to next dropdown
the dropdown in IE should ideally have 4 dropdowns 01,02,03 and 04
However due to vendor errors we may have any of the above missing from dropdown or extra orderpoints in the dropdown like 05
IE.document.getElementById("vendororderpoint").value ="01" is the code to select order point 01
I need an alert in excel if any of the 4 dropdowns is missing.
I am trying to create a form with dropdowns (see attached file), so that when a particular company is selected in the first drop down, the second and third only display the relevant business units and departments respectively.
The INDIRECT function has confused me and I am not sure how to use it.
I am trying to wrap my brain around dependant dropdowns and have hit a brick wall.
Using the Contextures web site [url="http://www.contextures.com/xlDataVal02.html#TwoWord"] I can get part of the problem to work but when I try to add a third dropdown i get lost. Attached is a sample of the workbook.
I have
Userform
Textbox1
Textbox2
textbox1 containing the province
textbox2 containing the city
If didn't click any value of province the city textbox2 don't have any value and if i click the one of the province the city will now have a value . Is that possible
Here is the picture : [URL] .....
I'm not a novice but this might be something simple I didn't realize. I am creating a quoting sheet for a steel fab company. I have created dopdowns for the different materials and sizes but the dropdown is way too big. I need to have a column that helps me filter the dropdown more so I don't have to scroll through litterally hundreds of steels to find the one I need. The good news is that most steels have prefixes that make them easier to filter.
For example:
L-3x3x1/2
L-2x2-1/2x1/4
C6@8.2#
C8@11.5#
W12@16.0#
W21@44.0#
What I'm looking for is a way to have a dropdown that has all of the prefixes (L, C, MC, W, PL, etc) in it and when I select one of them the next column (the actual description of the steel as shown above) will only give me the specific steels for that steel shape (L,C,W,etc)
Currently I'm putting one row of say the MC shapes and one row of the C shapes and one row of the L shapes then copying them as needed. It's a lot of work and you can easily make a mistake.
I have two dropdowns, both use a different source lists and both use the same reference cell to deliver the result, My problem is I need the contents of the cell to be deleted and the new result inserted. At the moment if the cell is already filled the new result is put in the next column.
What I would like to happen is to have two dropdowns one above the other (B2 and B4) and the result in a cell below them in B6, which ever dropdown is used the result will fill the cell B6 this cell is then used for vlookup.
