WE have many spreadsheets with 1000's of part numbers that need to be converted--- currently the spreadsheets have data in B1 and B2 (part number and description), B3 and B4, and so on--- we need to be able to take B1 and send it to A2, so the part number and the description then end up on the same row--can anybody help this Excel novice convert this data??
View 14 RepliesI have a column of data (A1:A38) that I need to convert to a row (A1:AL1) and I can't figure out how to do it. Forgive me if the answer is in the forum but I don't know excel well enough to use the proper search terms. I tried searching on pivot which only yielded pivot tables which I do not *think* apply to this.
View 2 Replies View RelatedI have a spreadsheet in one column contains multiple sets of data separated by commas see example 1.
I need convert the data to rows, each set into a new row see example 2.
Example 1: PS-8800-C,PS-8800-D,PS-8800-076,PS-8800-077,PS-8800-077A,PS-8800-078,2"-SC-4057-A-40H-GT
Example 2:
PS-8800-C (Row 1)
PS-8800-D (Row 2)
PS-8800-076 (Row 3)
I have a variable, ColumnX. I want to use VBA to generate some formula referencing ColumnX. For example: I want to sum the values in A1 to A10. ColumnX has been set to "1" which is the number of column A.
Range("A11")= "=sum("A1:" & ColumnX & "10)"
Obviously the above code doesn't work because I'm putting a number where VBA expects a letter. How can I rewrite my code so that A11 will entered with formula that sums A1 to A10?
I have a excel spreadsheet that is setup as follow:Johnson, Ashley0916BF00001U9/16/2009Test1POSITIVE0916BF00002R9/16/2009Test1POSITIVE0916BF00001U9/16/2009Test2NP0916BF00002R9/16/2009Test2NP0916BF00001U9/16/2009Test3NP0916BF00002R9/16/2009Test3NPBlack, Tom0517BF00012R5/17/2009Test1POSITIVE0527BF00003R5/27/2009Test1NEGATIVE0601BF00009R6/1/2009Test1NEGATIVE0517BF00012R5/17/2009Test2NP0527BF00003R5/27/2009Test2NEGATIVE0601BF00009R6/1/2009Test2NP0517BF00012R5/17/2009Test3NP0527BF00003R5/27/2009Test3NP0601BF00009R6/1/2009Test3NP
First column is in goups: First row of each group contains customer's name then followed by test codes. Test codes are usually repeated three times per customer but they have different names (listed in third column as Test1, Test2 and Test3) and different results (listed in 4th column as POSITIVE, NEGATIVE or NP).
What I want to do is to convert this data into a way that each row has One customer name and the columns in front of each customer lists Tests results and dates. If a customer has multiple test codes, then one row to be created for each test code.
Customer NameTest 1 DateTest 1 ResultTest2 DateTest2 ResultTest3 DateTest3 ResultJohnson, Ashley9/16/2009POSITIVE9/16/2009NP9/16/2009NPJohnson, Ashley9/16/2009POSITIVE9/16/2009NP9/16/2009NPBlack, Tom5/17/2009POSITIVE5/17/2009NP5/17/2009NPBlack, Tom5/27/2009NEGATIVE5/27/2009NEGATIVE5/27/2009NPBlack, Tom6/1/2009NEGATIVE6/1/2009NP6/1/2009NP
I need a macro that allows me to select a matrix of cells and converts it into a single column elsewhere, pasting the second column below the first and so on. Is it possible to select the matrix, hit a macro key and then paste it in my selected location?
View 11 Replies View RelatedI have a set of training information in the rows, with dates under it which maps back to names of employee in the left hand side. How do I convert that to Name of Employee Training attended dates expiry date.
View 8 Replies View Relatedhow to create some code that can convert any column number to it's respective letter, from 1 = "A" to 16384 = "XFD". The code is posted below. Enjoy, or let me know how you would improve it.
Code:
Function colNumToChar(colNum) As String
Dim Num1, Num2, Num3 As Integer
Dim Let1, Let2, Let3 As String
[Code]....
I know Excel quite well but this problem has me beaten and I have searched high and low to know avail.
I have an input column of departments and names which is ever-changing and currently I have hard-coded them into a spreadsheet to run a couple of drop down columns. However, I really want this to be automated and no longer hard-coded so that names are in the correct departments automatically.
I have a file with a lot of numbers, but one column with single digits. These digits have a cooresponding model name. I want to convert them all to their model name. There are only 4 model names. I tried a nested IF statement, but felt this wasn't working properly or was not the proper formula choice.
A Find/Replace would work, but it picks up the single digits elsewhere in the sheet. I realize i could copy/paste my column to a new sheet and from there convert/paste, but I am trying to get better at Excel.
I some assistance with converting a date based upon a time in column A. I have a number of dates in column A as follows:
01/13/2009 11:50 AM
01/05/2009 09:14 AM
01/12/2009 05:30 PM
01/12/2009 02:30 PM
01/12/2009 01:45 PM
I need to convert these values to another date base upon the values in column A.
If the time < 2:00 pm then leave date as is, if time > than 2:00 pm then add one day. The expected results in column B would be as follows
01/13/2009
01/05/2009
01/13/2009
01/13/2009
01/12/2009
I have column A set up to display dates in the following format: 03/04/2009. While the "look" is fine for the values in the column, I cannot get it to stay in that format when it is moved to a text file. It simply converts the display back to 39876.
I would like a macro that 1) looks at all values in column A and 2) converts each cell in the column to text format but leaves the contents so they are dates 03/04/2009 (mm,dd,yyyy).
I have a column that contains dates from our system that displays in "mmddyyyy" format (i.e., 10121999 or 8121998). How do I convert this to a 10/12/1999, 8/12/1998 formatted column?
View 1 Replies View RelatedI have a table in excel in which every line has as many values as the days of the month (e.g. 31 values first row, 28 the second..) and it goes from January 1948 to July 2014. So it ends up having around 800 rows.
I need to put all of those into a column, but it gets hard because the rows have different lengths. I have seen in this forum some solutions that apply well when the table is regular, but I'm stuck in trying to get a solution for when it's not. I have tried to record a macro using TRANSPOSE, but then I cannot change the cells into this formula in the editor in order to create a loop.
I also have to consider leap years.
convert a column of text to number with macro.
I have a one column spreadsheet. The column contains this data:
1 Name
2 Address
3 City
4 State
5 Zip
6 Telephone
7 Fax
8 URL
9
10
11 Name
12 Address
13 City
14 State
15 Zip
16 Phone
17 URL
18
19 Name
20 Address ... and so on
Where there may be one or two blank rows between the individual records and where there may or may not be a Fax number (or row) in the record.
I am trying to convert this data to a horizontal column format - which works fine if I do a copy/paste special/transpose. However I have to do this for 1,800 records and cannot figure out how to do this reliably.
I gave the above illustration to simplify but, actually this is a two column spreadsheet with individual row labels for every record using the above terminology. In other words the above text is in the first column and the data is in the second. Just thought I'd mention in case there was a way to do some kind of if/then formula.
I have a problem converting hourly data into daily data for electricity import capacity. My file has the following form:
| Connection | Date | Period | Available (capacity) | Where 'Connection' identifies the physical location of the capacity (4 possibilities, Germany -> Netherlands; Norway -> Nehterlands; Belgium -> NL; UK -> NL), 'Date' refers to the date, Period refers to hour of the day (e.g. 18:00-19:00) and 'Available' refers to the import capacity of electricity on that conncetion during that hour. I need daily aggregates and tried several things such as DSUM but I cannot manage I've shortened the attached file quite a bit because of the upload size restriction. I am using Excel 2010. I've tried some suggestions in similar topics but none worked for me.
reformat a table in which data for each named person is presented in one row with mutiple columns into a table in which each named person has multiple rows and one column of data. The solution to to this has eluded me so far.
The attached example shows before and after.
From a table like the one here, how can I generate a list (without spaces) of all the names only? Perhaps filtering by "Mr","Miss","Dr" or something? The result I'm after would be a column on a new sheet that ran:
Mr James
Mrs Milly
Dr McAllister
Miss Aujard
Mr Barker
Mrs Stanley
I am trying to calculate the entire amount of time taken by each person in my team to complete a number of dictation files. The program we use exports the data in this format:
MacroLab 15:3029/02/2012 17:561/03/2012 8:00MacroLab 15:2129/02/2012 15:411/03/2012 8:29
Where it says 5:30, excel shows it in the formula bar as 5:30:00 AM.
What I've been trying to figure out (with very little understanding of how excel works) is how to format that column so that it shows 00:05:30 (as in 5 minutes, 30 seconds) so that I can sum the entire column for each typist and get the total amount of time spent typing per day.
I started changing it manually, but there's rows and rows of the data, for a few months now and its taking me forever. I've been googling my self ragged, but I either don't understand what people say, or I'm not searching the right way (probably a combination of both).
Basically i have month end data ranging from 31/01/2000-31/01/2009 with a value attached to each. I need to convert this data into a daily series with the month end value being the same throughout the whole month. I've been playing around with excel for a couple hours tonight
View 9 Replies View RelatedI have a workbook where employee scheduling is done on a monthly basis in 15 minute intervals. It is laid out like this:
******** ******************** ************************************************************************>Microsoft Excel - Key Support Services 090813.xlsx___Running: 12.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2C2D2E2F2G2H2=ABCDEFGH2Time8/1/20098/2/20098/3/20098/4/20098/5/20098/6/20098/7/200938:00 AM 48:15 AM 58:30 AM 68:45 AM 79:00 AM 89:15 AM 99:30 AM 109:45 AM 1110:00 AM 1210:15 AM 1310:30 AM 1410:45 AM 1511:00 AM Schedule [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The times go from 8 AM - 8 PM, and all of the cells within the range B3:AF51 are drop downs with the employee names listed. They are conditionally formatted so that we can easily see who is scheduled to work when, and on what days.
The problem that I have is that I like this layout for inputting the data because I can see it all very clearly, but it is not good for archiving or saving past months data. I want to be able to take that view and change the format so that it can easily be summarized in a Pivot Table for all of the historical information.
So, I need to take the date and time and format both of them into a column, put the client name (will be the sheet name) in the next column, and then the name of the staff that worked during that time.
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 12.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1DateTimeClientStaff28/1/20098:00 AMClient1Employee138/1/20098:15 AMClient1Employee148/1/20098:30 AMClient1Employee158/1/20098:45 AMClient1Employee168/1/20099:00 AMClient1Employee178/1/20099:15 AMClient1Employee188/1/20099:30 AMClient1Employee198/1/20099:45 AMClient1Employee1108/1/200910:00 AMClient1Employee1118/1/200910:15 AMClient1Employee1128/1/200910:30 AMClient1Employee1138/1/200910:45 AMClient1Employee2148/1/200911:00 AMClient1Employee2158/1/200911:15 AMClient1Employee2168/1/200911:30 AMClient1Employee2178/1/200911:45 AMClient1Employee2188/1/200912:00 PMClient1Employee2198/1/200912:15 PMClient1Employee2Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
From there I can take a completed month, and quickly run some code to make the change, and add it to the historical tracking where it is all summarized.
I have been tasked with converting our old inventory system into a new one. Here is an example of the conversions I need to do,
I need to convert this:
A1 A2
1.50 OD x .035 W 304, WD ASTM A-269
1.50"OD X .065 W 304,SMLS ASTM A-269
1.50"OD SCH 40 304, SMLS A-312
INTO
A1 A2
304-WD-ASTM A269-1.50X.035 304 WELDED ASTM A269 1.50X.035
304-SMLS-ASTM A269-1.50X.065 304 SEAMLESS ASTM A269 1.50X.065
304-SMLS-ASTM A312-1.50 SCH 40 304 SEAMLESS ASTM A312 1.50 SCH 40
The current plan is for me to do this manually over thousands of entries over the next few months, but if I can do it in a quick fashion that would be way better.
I have a bunch of information in word that I am converting to excel. I have attached the document called test for you to see.
How do I get all the information between the word "focus" to migrate into rows of data so that I can get one company on one row?
For example line one should be like finished product attachment.
I have atext file like this.
< ZEEO:ALL;
LOADING PROGRAM VERSION 22.10-0
BSC3i BSC1000 2012-04-10 11:23:47
BASE STATION CONTROLLER DATA
NUMBER OF PREFERRED CELLS ........................(NPC).... 3
[Code]....
Now when I am running the macro the output is coming for a single text file as input like..
BSC
NPC
GMAC
GMIC
[Code]....
It should be only a single row as output,but here it is coming in multiple rows(as no of columns) the same data .this is the problem.when I run the same macro for multiple text file it is working properly.
I am trying to solve below issue, but cant think of a way to solve it:
All the columns has alot more data, with more groups/fruits/clients etc., this is only a short version.
I need to create a Macro to help me converting the Data to the Convertion template, based on which Group is difined in Cell B17.
I am trying to figure out an efficient way to convert data into Excel. The data is not in a row/column format. The format that I received the data in is as follows (2 columns; column labels repeating for each name in column A, and the corresponding data in column B. See below. Any ideas on how to best to convert this data into column labels across the top and data in rows under each column heading?
Column A Column B
Name John Doe
Address 123 Maple Street
City Any City
State Any State
Zip 12345
First Name John
Last Name Doe
BLANK ROW
Name Jane Doe
Address 123 Maple Street
City Any City
State Any State
Zip 12345
First Name Jane
Last Name Doe
I had this code and it works like a charm, except, it crashed if the data gathered is just one element due to transpose ..
VB:
Function getAR(c1 As Range, c2 As Range, w As String) As Variant
Dim s As String
Dim arrTemp() As Variant
Dim arr() As Variant
[Code]......
I have linked two workbooks together but now need to be able to convert that linked data to straight text. I have a v-lookup in the report that needs this to be this way. I do not want to use paste special values because that would defeat the purpose of linking the two pages.
View 1 Replies View RelatedI need to transpose or move some of the data on Column B to horizontal position, is there a formula that I can use to do this? Attached is sample of what I want to do.
View 14 Replies View Related