I have this: =LOOKUP(Budget!J3,B11:B42,E11:E42) RESULT: 5%. what I want: =LOOKUP(Budget!J3,B11:B42,(X3)11:E42) RESULT: 5%. I want excel GET the value inside X3 and and go to the other sheet with this variable. X3 = E
View 2 Replies
I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
I'm trying to get dropdown in cell. Depending on what is chosen, I then want another dropdown in the same cell of either New or Old for the item previously chosen. Hopefully the example helps because even I'm confused by this.
View 6 Replies View RelatedI am wondering if you can write me a VBA code for comparing the value inside a cell.
Code:
For i = 1 To 159
If Sheets("sheet1").Cells(i, 1).Value = Sheets("sheet2").Cells(i, 1) then
..............
Else
[Code]....
is it possible inside this link to put a variable reference? for example to have a cell in my excel which in this case would be Report FY09 and if i change it to Repot FY08 the link would be c:Report FY08[PPV REVENUES FY 09 - Actual.xls]PPV Actual'!$C$4:$BB$4 or in another case if i have the name of the sheet like
='Report FY09'!D4
to do it
='Report FY08'!D4
or even the excel file
c:Report FY08[PPV REVENUES FY 09 - Actual.xls]PPV Actual'!$C$4:$BB$4
to do it
c:Report FY08[PPV REVENUES FY 08 - Actual.xls]PPV Actual'!$C$4:$BB$4
Each cell below contain a number and a time + ET. if like say i want to delete the time + ET and leave only the number inside all cell.
1.1425 8:20pm ET ON A1
3.0805 6:10pm ET ON A2
814.30 6:42am ET ON A3
798.70 11:27am ET ON A4
380.00 9:10pm ET ON A5
After formating I need to multiply by 2 . As you can see my Cells.Value = Selection.Value * 2 is not correct. How can I accomplish this?
With Range("I17:I4000", Range("I" & Rows.Count).End(xlUp)).Offset(, 1)
.Formula = "=ReplaceChar(I17)"
.Value = .Value
Selection.NumberFormat = "0.00"
Cells.Value = Selection.Value * 2
End With
I'm starting a project where Excel will be used as the main UI for defining a table of data. I'm expecting to define a "template" - xlt i guess - that users can open and save as an xls, without over-writing the template. Users will populate the spreadsheet with a lot of help from user defined functions. I'm just getting started and would like to populate a particular cell with the current date, but only the first time the sheet is opened. I tried checking whether a cell was empty before assigning a value to it, of course this meant recursion!
Also: It might be nice to use the Today() function inside a UDF, but TODAY isn't a member of Application.WorksheetFunction - is there no way to reference TODAY() from within a UDF?
I have this loop, I get a range of specific cells and then I loop over this collection searching for a value, if this value exist I wanted to move one place to the right and then set a value on that cell, but for some reason when I put this offser(0,1) parameter, the loop became infinite, not sure why the code is doing this:
Code:
For Each c In Worksheets("Parameters").Range("A3:AR3").Cells
adress_start = ""
adress_letter = ""
[Code].....
I have made a pivot table which I use each month by just updating the source data, however I was trying to have a cell in another workbook say "=A31" but it keeps going "=getpivotdata(...specific name".
My usual practice was to copy the top ten rows of my pivot table into another file but I am trying to erase this step.
I am attempting to setup a spreadsheet that summarizes data from a set of other workbooks. The woorkbooks the data comes from is different for each year. However, I would like to have just one summary that can be changed based on the year entered.
In B1 the user enters the year. Say 2012
In the bulk of the spread sheet below the cells refrence
='C:...["&B1&" Pt. Visit Stats.xlsx]Summary'!$B$6
As I am sure many of you can guess I am getting a #REF! error. I just do not see why it shouldn't work.
I do not want to use the indirect function, because the refering workbooks would need to be open to draw data. I am guessing that I will probably need to research the Harland Grove Pull VBA work or more likely include a copy of Morfunc and then use the indirect function. But, I though I would ask here first just in case I am missing something relatively simple.
I want to place a thumbnail image inside a cell for each row of my spreadsheet and have those images STAY in that cell. Once I get the images in the cell, they float - if I sort the rows, the images get all mixed up.
View 9 Replies View RelatedI'm trying to create a simple VBA function in Excel so that I can sort and calculate results based on various conditions. I can get everything to work except changing the color of the cell where the output is placed. Here is what I have so far:
Function nameOfMyFunction(arguments)
If conditions Then
nameOfMyFunction = "No GRP"
ActiveCell.Font.Color = RGB(255,0,0)
End If
I'm sure that its something simple, but I've spent long enough on my own trying to figure it out and nothing seems to work.
The following bit of code has worked for me but when it goes back for the next b it still finds the address as $j$13. This address does match the criteria I want but what I want the programme to do is move to the next address matching the criteria in the range...
View 4 Replies View Relatedrearragning text on excel. I believe Macro will be needed to solve this problem so if anyone can help me out, it will be a big help. Thank you.
Example 1:
I need to rearrange
"trace Silt, cm SAND, some- f Gravel" into
"cm SAND, some- f Gravel, trace Silt"
Example 2:
I need to rearrange
"some+ Silt, f SAND, trace- f Gravel" into
"f SAND, some+ Silt, trace- f Gravel"
There are many different cases for this problem. So if there is a way for the computer to recognize the Capitalized word and move it to the front and rest should be arange in order listed below.
Order
and+
and
and-
some+
some
some-
little+
little
little-
trace+
trace
trace-
each term is seprarated by commas.
For example
f SAND, some+ Silt, trace- f Gravel
each color represent one complete sentence. and the order for them should be capitalized funciton first, then the follow the order provided above.
How can I view hidden characters inside an excel cell. I have an excel file that I receive from our vendors. After verifying the data, I save the file as a tab delimited .txt format. When I open the .txt file I see some data with " " at both ends. i.e. "800 North Ave. Suite A". The thing is I don't see the " " in excel. This tells me that these are non-printing characters.
View 4 Replies View RelatedI have 4 cells with simple data in them. In another cell, I would like to make a phrase and include all the data from the 4 cells in that phrase.
Example:
="Jackpot: &G2 (&G1) / &G3 = &G4 each"
I already tried this:
="Jackpot: "&G2" ("&G1") / "&G3" = "&G4" each"
Am I missing something? I'm pretty sure this is doable, I just don't know what's missing.
How do I change a Positive number into a Negative number inside a cell formula?
I have a figure in Cell AE 101 which has the positive number 141
I have another cell W1 which has the positive number of 437
I want to create a formula in cell X1 that takes the number in cell AE 101 of 141 and convert the number inside the formula of 141 into a negative number of -141 and then subtracts that number from Cell W1 of 437 leaving an equation inside the formula to read. 437-141 = 296
Since the number in Cell W1 changes all the time and the number in AE101 Changes all the time the new formulated number in X1 will change all the time too as the cells get updated.
I want to know how to display part of a cells text value, inside another cell.
Suppose in cell A1 i have "20-Jun-14"
How would I get cell B2 to display just "Jun"?
I have a string of text in cell A2. In cell B2 of my spreadsheet is a formula that calculates a number based on the text string in cell A2.
I want to write a VBA loop that removes a single character from the cell A2 string, then calculate the new value in cell B2. I want this loop to continue until the value in B2 falls below a set value (in this case 60).
My code so far
Sub trim_text()
Dim mytext As String
Dim myanswer As Integer
mytext = Range("A2")
myanswer = Range("B2")
Do While myanswer > 60
mytext = (Right(mytext, Len(mytext) - 1))
Loop
End Sub
This obviously does not work. In my excel table I have a formula in cell B2 to calculate "myanswer" will this work, or does that code have to be placed into the VBA code?
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies View Related=BDP("067901108 cn corp cusip","px_last")
is there a way to insert 067901108 cn corp cusip from a different cell into the formula?
067901108 cn corp cusip <---A1
067901108 us corp cusip <---A2
something like this?
=BDP("A1","px_last") which equal to =BDP("067901108 cn corp cusip","px_last")
=BDP("A2","px_last") which equal to =BDP("067901108 us corp cusip","px_last")
I have the below code working but not doing everything that I expect. It counts the number of columns on one sheet and copies the headings to rows to another sheet. One thing is that sometimes there are more than 10 headings and there are only room for 10 rows. So after 10 I need to insert rows. Currently the below code counts and inserts rows correctly but for some strange reason it only copies headings to rows for the first 9.
View 11 Replies View RelatedDISCUSSION:
I have some general code that needs to be kept tidy so I have been experimenting with calling other Modules to keep that general code short and sweet.
PROBLEM:
How to put the SUB's inside of another SUB on a separate Module?
Here is the desired pertinent code on the general code sheet:
I have a userform that updates col's A thru E. (undetermined amount of rows)
I need to sum col's B thru E individually.
It would always be summing from row 3 of col B thru E.
I have the code that finds or selects the last cell of each col.
I'm not sure how to put the "countif" function code into VBA.
Example would be col B would be populated with the letter "A".
I would need to count how many "A's" in column B.
Okay, I know you can reference worksheet functions with code like:
application.search()
But how do you use a UDF function within VBA???
I tried, thisworkbook.UDF() (UDF being the name of any UDF) but it didn't work.
I have a table of values that are computed using input values from the first column (y's) and first row (x's). Each value in the table (z's) has a unique set of x and y.
In order to plot z vs x and z vs y I need to create a list of unique x,z and another of y,z. My question is how most efficiently to thus turn this table "inside out." The table will be very large, or I would do it by hand.
I have an excel work book that I want to extract certain info from Each tab where in the result tab I use this formula to get required data from another tab.
I has about 24 tab , in the 25th one i collect data from all previous , using below formula inside each cell to get
=INDEX('2014 wk12'!$C$1:$C$17,MATCH("Total LTD Result",'2014 wk12'!$A$1:$A$17,0))
Where 2014 wk12 is a tab name , so , it works fine
excel iss.png
What i want is t replace the sheet name which in previous example is 2014 wk12 with relative name in column A
The closest i have in mind is to make it as below ( it is not working ) so what shall be the working formula of the below
=INDEX('Tab name from Column A '!$C$1:$C$17,MATCH("Total LTD Result",'Tab name from Column A'!$A$1:$A$17,0))
So I have a formula which contains a countifs that looks like this:
=COUNTIFS($AZ:$AZ,$AZ15,$AM:$AM,ABS($AM15),$AD:$AD,$AD15)
However, I want the formula to count values when ABS($AM:$AM)=ABS($AM15) but I get an error if I try to put ABS($AM:$AM) as my range. Is there anyway to set my range as the absolute value of Column?
I have also tried ABS($AM15:$AM1000).
I'm trying to calc a Simple Moving Average of financial Fund data (row=fund type, column=date) on a very large matrix for a particular fund and date range. I locate the Fund of interest and retrieve the Start and End dates of interest and retrieve their addresses using the ADDRESS function. Since ADDRESS returns a text string, HOW DO I incorporate it's results into the following array function (which ignors blanks and 0 cells): {=AVERAGE(IF($L$10:$V$10>0,$L$10:$V$10,FALSE))}?
View 5 Replies View Related
