I have this: =LOOKUP(Budget!J3,B11:B42,E11:E42) RESULT: 5%. what I want: =LOOKUP(Budget!J3,B11:B42,(X3)11:E42) RESULT: 5%. I want excel GET the value inside X3 and and go to the other sheet with this variable. X3 = E
I'm trying to get dropdown in cell. Depending on what is chosen, I then want another dropdown in the same cell of either New or Old for the item previously chosen. Hopefully the example helps because even I'm confused by this.
is it possible inside this link to put a variable reference? for example to have a cell in my excel which in this case would be Report FY09 and if i change it to Repot FY08 the link would be c:Report FY08[PPV REVENUES FY 09 - Actual.xls]PPV Actual'!$C$4:$BB$4 or in another case if i have the name of the sheet like
='Report FY09'!D4 to do it ='Report FY08'!D4
or even the excel file c:Report FY08[PPV REVENUES FY 09 - Actual.xls]PPV Actual'!$C$4:$BB$4 to do it c:Report FY08[PPV REVENUES FY 08 - Actual.xls]PPV Actual'!$C$4:$BB$4
I'm starting a project where Excel will be used as the main UI for defining a table of data. I'm expecting to define a "template" - xlt i guess - that users can open and save as an xls, without over-writing the template. Users will populate the spreadsheet with a lot of help from user defined functions. I'm just getting started and would like to populate a particular cell with the current date, but only the first time the sheet is opened. I tried checking whether a cell was empty before assigning a value to it, of course this meant recursion!
Also: It might be nice to use the Today() function inside a UDF, but TODAY isn't a member of Application.WorksheetFunction - is there no way to reference TODAY() from within a UDF?
I have this loop, I get a range of specific cells and then I loop over this collection searching for a value, if this value exist I wanted to move one place to the right and then set a value on that cell, but for some reason when I put this offser(0,1) parameter, the loop became infinite, not sure why the code is doing this:
Code: For Each c In Worksheets("Parameters").Range("A3:AR3").Cells adress_start = "" adress_letter = ""
I have made a pivot table which I use each month by just updating the source data, however I was trying to have a cell in another workbook say "=A31" but it keeps going "=getpivotdata(...specific name".
My usual practice was to copy the top ten rows of my pivot table into another file but I am trying to erase this step.
I am attempting to setup a spreadsheet that summarizes data from a set of other workbooks. The woorkbooks the data comes from is different for each year. However, I would like to have just one summary that can be changed based on the year entered.
In B1 the user enters the year. Say 2012
In the bulk of the spread sheet below the cells refrence ='C:...["&B1&" Pt. Visit Stats.xlsx]Summary'!$B$6
As I am sure many of you can guess I am getting a #REF! error. I just do not see why it shouldn't work.
I do not want to use the indirect function, because the refering workbooks would need to be open to draw data. I am guessing that I will probably need to research the Harland Grove Pull VBA work or more likely include a copy of Morfunc and then use the indirect function. But, I though I would ask here first just in case I am missing something relatively simple.
I want to place a thumbnail image inside a cell for each row of my spreadsheet and have those images STAY in that cell. Once I get the images in the cell, they float - if I sort the rows, the images get all mixed up.
I'm trying to create a simple VBA function in Excel so that I can sort and calculate results based on various conditions. I can get everything to work except changing the color of the cell where the output is placed. Here is what I have so far:
Function nameOfMyFunction(arguments) If conditions Then nameOfMyFunction = "No GRP" ActiveCell.Font.Color = RGB(255,0,0) End If
I'm sure that its something simple, but I've spent long enough on my own trying to figure it out and nothing seems to work.
The following bit of code has worked for me but when it goes back for the next b it still finds the address as $j$13. This address does match the criteria I want but what I want the programme to do is move to the next address matching the criteria in the range...
rearragning text on excel. I believe Macro will be needed to solve this problem so if anyone can help me out, it will be a big help. Thank you.
Example 1: I need to rearrange "trace Silt, cm SAND, some- f Gravel" into "cm SAND, some- f Gravel, trace Silt"
Example 2: I need to rearrange "some+ Silt, f SAND, trace- f Gravel" into "f SAND, some+ Silt, trace- f Gravel"
There are many different cases for this problem. So if there is a way for the computer to recognize the Capitalized word and move it to the front and rest should be arange in order listed below.
Order and+ and and- some+ some some- little+ little little- trace+ trace trace-
each term is seprarated by commas. For example f SAND, some+ Silt, trace- f Gravel each color represent one complete sentence. and the order for them should be capitalized funciton first, then the follow the order provided above.
How can I view hidden characters inside an excel cell. I have an excel file that I receive from our vendors. After verifying the data, I save the file as a tab delimited .txt format. When I open the .txt file I see some data with " " at both ends. i.e. "800 North Ave. Suite A". The thing is I don't see the " " in excel. This tells me that these are non-printing characters.
How do I change a Positive number into a Negative number inside a cell formula?
I have a figure in Cell AE 101 which has the positive number 141
I have another cell W1 which has the positive number of 437
I want to create a formula in cell X1 that takes the number in cell AE 101 of 141 and convert the number inside the formula of 141 into a negative number of -141 and then subtracts that number from Cell W1 of 437 leaving an equation inside the formula to read. 437-141 = 296
Since the number in Cell W1 changes all the time and the number in AE101 Changes all the time the new formulated number in X1 will change all the time too as the cells get updated.
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
Column A on both sheets have an ID number which is unique to clients. Sheet one will only have a client ID once but sheet two may have the same ID multiple times
I need to compare both sheets Column A and if it finds a match, then paste the cell value on column E sheet two, into column K on sheet 1.
sheet 1:
A ..........................................K Client ID............................. name
Sheet 2:
A ...........................................E Client ID............................. name
if I have a range, say 33-35, I want to put a value into a cell and compare it to that range. It will set another cell to a certain value, based on the range.
i.e. if (35 > A1 > 33) A2 = B elseif (37 > A1 > 35) A2 = X
I'd like to compare two cells, and if the first cell is either >150, <161, OR =165 AND the second cell is ="E" to output a 1, and if false, output a zero. I have =IF(AND(AND(Sheet1!B3>150, Sheet1!B3<161, Sheet1!B3=165 ),Sheet1!E2="P"),"1","0")
But i know that is incorrect because Sheet1!B3 can not be greater than 150 AND less than 161 AND = 165. I can't figure out how to make it >150 AND < 161 OR = 161.
I have a report that contains 76 columns and any number of rows. I have seen between 100 and 23,500 rows. The data in each cell of each column must contain a precise number of characters. What I am trying to do is create a macro that will LEN() each cell and compare the value to row 1 of the cell's column. Row 1 contains the value of the required number of characters, row 2 contains headers and the data starts on row 3.
This is what I have so far:
Sub LENtorow1() Dim cel As Range Dim row As Integer
[Code] .....
It is this portion that is causing me troubles: Range(cel(ActiveCell.Column & row)). If I use a static value it works fine but when I try to make it recognize the first row of the current cell's column there is a break down. I have tried several variations, the one listed here is my latest attempt.
I have a spreadsheet and everyday it would change in length.
But I would like a macro that compares the value of each cell in column B against the value in corresponding cell in column D then moves to the next roll - so eg B2 against D2,B3 against D3......B50 against D50 until all rows are compared.
And when it finds a different makes the background colours go red !
I have a bit of a code but I think I need to loop to compare all populated cells !
I have data all in one column that I need to compare.It's basically the data between the 2nd and 3rd commas being compared to the data after the 2nd colon. I have over 860,000 entries in the database that this data is extracted from so I can't go through it one-by-one.
I have a column of dates formated DD/MM/YYYY in column H in one sheet. I need a formula that if a cell in H is more less than 30 days from today's date to display the value from an adjacent cell.
example:
Data source table *Serial #ID #TempExp date9384-63838QDYHEISAV4 YES01/18/201010384-78618PDQA7O7FUO yes11/18/200911384-78708QKM5XA12BK yes12/25/2009 Excel tables to the web >> Excel Jeanie HTML 4
I need a formula that will, if the exp date is less than 30 days from today, place the serial # in a cell on a different sheet.
I am trying to create VBA function that will compare search a worksheet row by row for a value in column c. If column c matches any of the array values, i would like the cell value from column d to be entered in another array. I'm familiar with adding values to an array, but i'm having trouble with the code to compare the values. the array is a string and the cell values are text.