=BDP("067901108 cn corp cusip","px_last")
is there a way to insert 067901108 cn corp cusip from a different cell into the formula?
067901108 cn corp cusip <---A1
067901108 us corp cusip <---A2
something like this?
=BDP("A1","px_last") which equal to =BDP("067901108 cn corp cusip","px_last")
=BDP("A2","px_last") which equal to =BDP("067901108 us corp cusip","px_last")
I have an excel work book that I want to extract certain info from Each tab where in the result tab I use this formula to get required data from another tab.
I has about 24 tab , in the 25th one i collect data from all previous , using below formula inside each cell to get
=INDEX('2014 wk12'!$C$1:$C$17,MATCH("Total LTD Result",'2014 wk12'!$A$1:$A$17,0))
Where 2014 wk12 is a tab name , so , it works fine
excel iss.png
What i want is t replace the sheet name which in previous example is 2014 wk12 with relative name in column A
The closest i have in mind is to make it as below ( it is not working ) so what shall be the working formula of the below
=INDEX('Tab name from Column A '!$C$1:$C$17,MATCH("Total LTD Result",'Tab name from Column A'!$A$1:$A$17,0))
=StacServer|Windham! '40720'
This is the format of an external call that I am trying to run. I need to change the number (40720) based on the day of the month (i.e. if its the 5th, then use 40725.
I am attemting to use a function to do this and passing in the device name (Windham) and location (40720). Unfortunately, I have been unable to get a String to send back as a formula. My attempt was as follows :
= Location ("Windham", 40720, "D7")
Function Location(name, num, cell)
Dim psDay As Integer
Dim psLocal As String
psDay = Day(Now)
Location = (Range(cell).Formula = "=StacServer|" & name & "!'" & (num + psDay) & "'")
End Function
I tried to count rows from one sheet and to put this value as counter in VBA For-Next loop.
VB:
Sub Copy_ID()
'
' Copy_ID Macro
[Code]...
It ends with "Invalid qualifier" error on the counter.Formula line. I attached sample excel with macro that I listed here.
I have a challenge with conditional formatting. I have products A-K with sales current year and last year and want to have year on year growth. I want to have one column where the cell formatting changes based on data validation.
Let's say product A sold 60 items CY and 50 LY meaning YoY variance is +10 items or +20%. Hence, if the relevant cell says "%" then the YoY figure should say "+20%" (formatted as a percentage) and if "VALUES" then YoY should be 10 (formatted as numbers/absolute values).
Remember also that YoY growth can be +100% (or more), 0% and -100%.
I am currently using the STDEV formula. Is there a way, that i can make
the formula use data from nonblank cells, only. For example: A1, A2, A5 will
have numbers listed. A3 & A4 are blank. Can i get the formula to use only
A1, A2, & A5?
I know about
(isnumber(match({,12054, 12056, 12058}).....
How could I express a range of numbers to identify 12054-13001. How would that expression be written?
LastRow = Worksheets("Sheet1").Cells(Rows.Count, "K").End(xlUp).Row
For i = 2 To LastRow
Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
If (Worksheets("Sheet1").Range("AE" & i).Value < 1.5) And _
((Worksheets("Sheet1").Range("K" & i).Value > 0) Or (Worksheets("Sheet1").Range("L" & i).Value > 0)) Then
Worksheets("Sheet1").Range("AE" & i).Font.Color = 255
End If
Next i
My loop here works just fine, and my Formula works in testing. However when I move my formula inside the loop I get an error.
Is the syntax wrong in this line = Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
For some reason Absolute $ or INDIRECT is not working inside my formula when I add a row to my chart. Formula keeps adjusting.
Here is my formula...=IFERROR(LARGE(IF($B$5:$B$50=$K108,$A$5:$A$50),1),"")
$B$5:$B$50 goes to $B$6:$B$51 AND $A$5:$A$50 goes to $A$6:$A$51..... it can't do that, throws my counts out, needs to stay in this range B5:B50 and A5:A50 when I add a row to chart
Also when I use INDIRECT
=IFERROR(INDIRECT(LARGE(IF("B5:B50"=$K108),INDIRECT("A5:A50"),1),""))))
I keep getting a error with =$K108, which is a cell reference in my formula which the formula needs to look at
So what do I do, or what formula do I need to use to stop this from adjusting as I add rows to a chart to stop formula from adjusting?
I'm trying to use some data from other workbooks in a formula. However, the path to the other workbooks we are using will often change.
I think that the user can enter the path to the other workbook in a cell in this workbook. However, I'm getting errors in my formula and am not sure how to make the formula use the cell to reference the location of the workbook that has the data that we want.
This is what I have, but it's giving me an error.
=Countif(' & 'Instructions'!B9 & Planning'!$I$3:$I$100, "C")
'Instructions'!B9 contains the location of the other workbook in the format \path[filename] Planning'!$I$3:$I$100 is the location of the range in the other workbook.
I am making a buiness card request form, which I have attached. On the Master Sheet (Sheet 1), the user enters in his/her personal data, such as his name address, phone number, etc. After he/she finished entering all the relevant data, Business Card Layout (Sheet 2) automatically populates and shows the user what their business card will look like.
Everything works fine, however I just realized that the contact information might vary from person to person. Right now, a person can enter 5 different contact information, but most of them will probably only choose four.
I wanted to know how to shift the cells down if the user does not fill out one of the contact information.
How do I change a Positive number into a Negative number inside a cell formula?
I have a figure in Cell AE 101 which has the positive number 141
I have another cell W1 which has the positive number of 437
I want to create a formula in cell X1 that takes the number in cell AE 101 of 141 and convert the number inside the formula of 141 into a negative number of -141 and then subtracts that number from Cell W1 of 437 leaving an equation inside the formula to read. 437-141 = 296
Since the number in Cell W1 changes all the time and the number in AE101 Changes all the time the new formulated number in X1 will change all the time too as the cells get updated.
I have the below code working but not doing everything that I expect. It counts the number of columns on one sheet and copies the headings to rows to another sheet. One thing is that sometimes there are more than 10 headings and there are only room for 10 rows. So after 10 I need to insert rows. Currently the below code counts and inserts rows correctly but for some strange reason it only copies headings to rows for the first 9.
View 11 Replies View RelatedDISCUSSION:
I have some general code that needs to be kept tidy so I have been experimenting with calling other Modules to keep that general code short and sweet.
PROBLEM:
How to put the SUB's inside of another SUB on a separate Module?
Here is the desired pertinent code on the general code sheet:
I have a userform that updates col's A thru E. (undetermined amount of rows)
I need to sum col's B thru E individually.
It would always be summing from row 3 of col B thru E.
I have the code that finds or selects the last cell of each col.
I'm not sure how to put the "countif" function code into VBA.
Example would be col B would be populated with the letter "A".
I would need to count how many "A's" in column B.
Okay, I know you can reference worksheet functions with code like:
application.search()
But how do you use a UDF function within VBA???
I tried, thisworkbook.UDF() (UDF being the name of any UDF) but it didn't work.
I have a table of values that are computed using input values from the first column (y's) and first row (x's). Each value in the table (z's) has a unique set of x and y.
In order to plot z vs x and z vs y I need to create a list of unique x,z and another of y,z. My question is how most efficiently to thus turn this table "inside out." The table will be very large, or I would do it by hand.
So I have a formula which contains a countifs that looks like this:
=COUNTIFS($AZ:$AZ,$AZ15,$AM:$AM,ABS($AM15),$AD:$AD,$AD15)
However, I want the formula to count values when ABS($AM:$AM)=ABS($AM15) but I get an error if I try to put ABS($AM:$AM) as my range. Is there anyway to set my range as the absolute value of Column?
I have also tried ABS($AM15:$AM1000).
I have this: =LOOKUP(Budget!J3,B11:B42,E11:E42) RESULT: 5%. what I want: =LOOKUP(Budget!J3,B11:B42,(X3)11:E42) RESULT: 5%. I want excel GET the value inside X3 and and go to the other sheet with this variable. X3 = E
View 2 Replies View RelatedI'm trying to calc a Simple Moving Average of financial Fund data (row=fund type, column=date) on a very large matrix for a particular fund and date range. I locate the Fund of interest and retrieve the Start and End dates of interest and retrieve their addresses using the ADDRESS function. Since ADDRESS returns a text string, HOW DO I incorporate it's results into the following array function (which ignors blanks and 0 cells): {=AVERAGE(IF($L$10:$V$10>0,$L$10:$V$10,FALSE))}?
View 5 Replies View RelatedI am trying to create a For Loop where the RND from array column sptemp(i,2) is static throughout the entire loop when I pull the data out separately by columns to create a chart. The data works perfectly if I print it out on the excel spreadsheet via ctrl+shift+enter as an entire array but I am trying to graph the columns and the RND is updating and not syncing with the same random number, as sptemp(i,3) and sptemp(i,5) are both linked to sptemp(i,2) which is the RND. I am trying to graph column 3-5 on the Y-axis and column 1 on the X-axis, and column 3 and 5 should look identical after subtracting column 4.
View 1 Replies View RelatedI'm trying to get dropdown in cell. Depending on what is chosen, I then want another dropdown in the same cell of either New or Old for the item previously chosen. Hopefully the example helps because even I'm confused by this.
View 6 Replies View RelatedIs it possible to make a function inside a textstring?
E.g. - The area of the building is [=A1] mē and contains [=A2] apartments.
I have a string like this ('hello'). How can i get the string inside the quotes ie hello?
View 2 Replies View RelatedI am wondering if you can write me a VBA code for comparing the value inside a cell.
Code:
For i = 1 To 159
If Sheets("sheet1").Cells(i, 1).Value = Sheets("sheet2").Cells(i, 1) then
..............
Else
[Code]....
how can I use a formula via VBA instead of putting it in the cell itself? It is causing me problems because when I put a formula in a entire row, all the cells five me the number ZERO, when I want them to stay without any number until I input something in the other row's cell in the same line. I will give an example: I would like that anytime I entry any number in a cell in column A the cell in column C will give me the number in column A times the number in column B (which is a variable daily updated via an internet connection), and when the cell in column A becomes "null" (that is when there is no number in the cell, not even a zero) the cell in column C also becomes null.
When I try to do it using formulas in the cells I always get a ZERO in all the column cause they read a 'null' as a 'zero'. Trying it using VBA I have some success but still have problems. I tried this code
If Target.Column = 3 Then Cells(Target.Row, 8) = Cells(Target.Row, 3) * Worksheets("Sheet4").Range("d32").Value
But it makes the cell in column 8 be static and change only when I click on the cell in column 3. I need it to change automatically when the number in D32 is changed too. As a formula in the cell would do.
is there any way to input a formula via VBA, how?
Sub Macro1()
Sheets("AllSheets").Select
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.SetSourceData Source:=Sheets("sheet2").Rows("48:48")
ActiveChart.Location Where:=xlLocationAsObject, Name:="sheet2"
ActiveSheet.Shapes("Chart 7").ScaleWidth 1.79, msoFalse, _
msoScaleFromBottomRight
ActiveSheet.Shapes("Chart 7").ScaleHeight 1.01, msoFalse, msoScaleFromTopLeft
ActiveSheet.Shapes("Chart 7").ScaleWidth 1.09, msoFalse, msoScaleFromTopLeft
ActiveSheet.Shapes("Chart 7").ScaleHeight 1.01, msoFalse, msoScaleFromTopLeft
End Sub
i need the chart to be inside allsheets. currently it create a new sheets chart1 once i generate it.
I have a list of parts that I have to create in a system. It is easier to do if I create a list of materials ahead of time of what components are needed. What I have done is create a part list that contains a list of parts, what the cost, whether they are manufactured or purchased, and what the sub component is if they are manufactured.
This worked great till I ran into my first sub component that contain its own sub components. I am attaching the spreadsheet so everyone can see what I am doing or more to the point trying to do. IF VBA is a better solution that would be great.
What I need is a formula (or VBA if it is better) that brings back the sub-components and their sub-components for each part until the parts tree for the original part number reaches the base purchased sub-parts.
I have the 1st worksheet set up in three different ways. The first one you run into is simply a length calculator and can be ignored.
The second way is the original way I had the spreadsheet working and it works fine for parts with only one sub-component. If a sub-part has more than one sub-component then it doesn't work.
The third section is where I started building what I thought would work, but it is clumsy and only will work nicely if I can place an IF statement that will only bring back a value for a sub-component if one exists otherwise it will remain blank.
What I would like is to have a formula that will auto fill the information IF and only if it exists for each sub-part listing all sub-components ( I need if it exists, cost, whether it is manufactured or purchased, any and all sub-components [followed by the same information as the parent] and vendor).
When I use TextBox.SetFocus in a userform , the curser will be inside the TextBox,
My TesxtBox has a value in it, so when i apply the TextBox.SetFocus I want the value to be highlighted insted of only being the active TesxBox.
Sometimes when i run code under a command button on a pop-up user form, the contents of the userform go "blank (i.e., border stays on, so you can see that the form is still there, but the contents are all "white"-you cannot read/see any of the content...
What could be done to prevent this from happening (presently, i just have the mouse cursor displaying while code is running?