I need to pair up 20 people in sequence for a workshop, so I number the people and can rotate people numbered 1-10 with 11-20 easy enough, but when it gets to pairing 1-10 together in pairs and 11-20 in pairs.
Is there a formula I could use in Excel to work out the easiest pairing for me?
This is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
I have a spreadsheet with 14, or maybe 16, or maybe 40 names in column B.
A1 = 1 B1 = JOE CITIZEN
A2 = 2 B2 = JANE PERSON
...
A17 = 3 B17 = JACK DOE
and so on...
I want to randomly assign these names to pairs using a macro button, and basing it on the number of players (C1)
So if C1 is 12, I'd like the function behind the macro button to come up with 6 * 2 numbers (2 and 11, or 4 and 7,
all completely random, but within the 12 specified in C1) and write these random values in Range D1:E6
(if C1 is 18, then the range to write in would expand to D1:E9).
I don't know enough about writing code to be able to pull this off .
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
I have been playing around with some data and can't seem to get it the way I want it. I have played around with Pivot tables and grouping but I can't seem to figure out how to accomplish what I need in Excel. To better explain I have attached some test data of what I am trying to accomplish.
View 14 Replies View RelatedSay column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies View RelatedI have a problem in terms of summing unique numbers in a set of reoccurring numbers. Due to the restrictions in the spreadsheet I am unable to use a filter / advanced filter or pivot table. What I basically want to do is sum every time there is a different number. In this case it's:
37.85+80.61+129.38+185.85+1259.69+104.96
The unique numbers have a maximum of 6 and a minimum of 3. Is there a generic formula that I can apply so that it only counts / sums the number once. I can use VBA code or just a simple array. I'm just not familiar with any sort of functions that can do this.
37.9537.9537.9537.9580.6180.6180.6180.61129.38129.38129.38129.38185.85185.85185.85185.851259.691259
.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259.691259
.691259.691259.691259.691259.69104.96104.96104.96104.96104.960.000.000.000.000.000.000.000.000.000.000.000.000.000.000.00
I have a list numbered 0 to 300. What I am looking for is a formula to randomly select 150 unique sets of two numbers and list them in separate columns for a competition draw and should appear as per the example below
HomeAway
7v96
11v4
146v25
I am looking for a way to create a random order of numbers in a given range. For example, A1:a100 to be populated with a random number between 1 and 100, but not to duplicate, using every possible number within that range. I use the RANDBETWEEN function to generate the numbers, but I cannot prvent them from duplicating.
View 2 Replies View RelatedI have attached a screencap of an example source table that I am trying to write a macro to manipulate each day. Starting conditions are that I have data in column A and B. Column A would be reference numbers that may be on one line, or more likely, on multiple lines repeating with varying counts. Column B is the weight associated with each line. I would need a macro that could loop through column A, determine if the ref number has changed, and then calculate/populate column C. Column C is the % of the total weight for the unique reference number. I have illustrated this in the table using column D. This is taking me incredible manual effort to complete right now and I do know VBA, I just don't know how to loop a variable range in this case.
View 9 Replies View RelatedI am working in Excel 2010 (Windows 8) and am having real problems trying to find a function/formula that will work with both numbers and text. I am trying to identify if the contents of Col A cells and Col C cells on each row are duplicated within a worksheet, and if they are, to add a 'J'.
(Column A is a list of numerical company codes and Column C is a list of adviser codes using the letter A-G. If a company ID code has more than one of the same adviser codes referenced to it, it is termed 'Joint', hence the 'J').
The formula I've used is: =IF(A2:C2, FREQUENCY>1, "J")
But it tells me 'numbers only'.
I built an Excel Macro to pull information from my schedule and compile it within another Worksheet. The Macro below searches for an instance of "Unavailable" and then populates my Data Worksheet with the WeekDays (ie: M-W-F or ALL Week), the Details (ie: Vacation or Training) and the Name of the employee. I struggled with a way to populate my employee name as "unavailable" isn't always offset by the same amount of characters to employee name (as it is with WeekDays and Details). Instead, I collected the row in which "Unavailable" was found.
I used the Vlookup function to populate the number of Absences and it worked swell.
=VLOOKUP(C2,O:P,2,FALSE)
C2 is populated with Weekdays (ie: ALL week or M-W-F)
O contains a list of possible day combinations
P contains the number of days
I hoped to use a similar function to populate my employee names. This didn't work well a 'tall.
=VLOOKUP(A2,L:M,2,FALSE)....................
Using Microsoft Access to pull from a database work orders. Some of those are what we call "dummy" work orders and have a letter in them, real work orders are signified by a 10 digit number. I would like to sort and eliminate the letters to find appropriate data. I am assuming I will need to copy into excel and do some sort of formatting but not sure where to start.
View 1 Replies View RelatedI developed a 14-day work schedule and I assigned each different job position a number. The different job positions are numbered 1-6 and are as follows: #1=5:30am-1:30pm, #2=6:00am-2:00pm, #3=9:30am-1:30pm, #4=12:00pm-8:00pm, #5=1:00pm-8:00pm & #6=6:00pm-8:00pm. Numbers 1,2,4,5 clock-out for a 30 minute lunch break, while the other numbers do not.
My goal is to insert the numbers 1-6 into the spreadsheet throughout the 14 days for each employee, and have Excel calculate the total number of hours for each employee in the far right column. I would also like "V" & "H" to equal 7.5 hours. This would save a lot of time instead of going through and adding up the hours with a calculator
I'd like to count the number of unique numbers in a cell
For instance, in cell a1 I have a number, 38831422. This contains 5 unique numbers, 3,8,1,4 and 2. Is there a formula that can calculate this for me?
jill
I have a column full of Invoice No's. I want to count the number of Invoices that are unique, ir avoiding duplicates.
I know I can use the Advanced filter facility but I'd rather do it in a formula if possible.
I'm working in Excel 97, trying to use a formula I found in the archives here to count unique numbers in a column.
=SUMPRODUCT((V2:V10000"")/COUNTIF(V2:V10000,V2:V10000&""))
I'm not exactly sure what this formula is doing, but it seems to work reasonably well, except that it's adding one to my total.
i.e. I have a total of 15 and it returns a value of 16 or I have 0 and it gives me 1.
I have to create ranges of unique numbers that follows the below rules.
1) Have to start with 3 standard digits (ie 101 or 102 etc)
2) The total length of the is has to be 10 digits (ie 1010123456)
3) The second part (the last 7 numbers) must be unique!
4) Can create a lot of numbers (more that 5000 rows)
5) thats all with the unique numbers
Continue,
Somewhere in the sheet has to be a search function to find where a specific id is located, make it red and copy/cut in to another sheet.
I am looking for a formula that matches two unique numbers in a table based on two numbers that are entered in two other cells. This will be clearer by looking at the example below and the attached.
The goal is to find the number entered for the home field (cell c2) in the "home" row (B5:K5) with the number entered for the away field (cell c3) in the "away" column (A6:A15) and result in the data element where the row and columns come together. The expected result for this example in the attached would be "JPD".
Another example would be if a 6 was in cell c2 and an 8 was in c3, the expected result would be "RBK". I think this can be done by indexing and matching but my memory has gone blank with how this works.
How to generate all the possible combinations of 5 numbers, e.g. 1,2,3,4,5. Then 2,3,4,5,1 and so on, in a series of excel columns and rows. Also for 6 numbers etc.
View 14 Replies View RelatedPlease refer to attached sheet.
I have numbers in column A thru G.
I need unique numbers from this list in column J as shown.
I want to generate numbers (1 to 15) in cells A1 through O1, but the
number in each cells should be unique compare to the other cells, how
can I do it? If I use =randbetween(1,15), I can not get unique number
in each cell, some numbers are duplicated.
Is there a formula I can use to count the number of unique claim numbers in an excel column?
Is there a way that I can format a cell containing a number containing a decimal point to a number without a decimal point. Example, 205.55 to 20555
I want to add & generate unique numbers in a column of similiar words..
For Instance:
RED
RED
RED
BLUE
BLUE
BLUE
etc..etc..
I want it to look like this:
RED1
RED2
RED3
RED4
RED5
BLUE1
BLUE2
BLUE3
I want infinite numbers next to the same wording but unique.
I have 2 rows A & B.. NAME & MOBILE PHONE Title in line 1
I am not to familiar with excel. Step by Step please, anyone out there.
I saw a similar posting, but the formula did not work out for me.
Then i am going to save the file as a CSV
I have 12 Cells, years 1 to 12. I want to create a random number for each cell, which then depending on what the number is, either 1-75 being 8,000,000 or 76-100 being 10,500,000, place it in the cell and be able copy it down. What i have done already you can see on the attached workbook, or the table i used:
I used this table to generate the random number to give either 8m or 10.5m, except i put the VLOOKUP in the year 1 cell, added some dollars signs and copied down but that only makes them all the same, so i want a way to make each year have its own random number preferably without making 10 tables.
I need a mcaro to concatenate my project. I have 1 number in six separate cells that I need to be concatenated into a 3 digit number without duplicates. My data is in cells A4:C5 (six numbers) note that I have two duplicate numbers so the results should only yield (10) different 3 digit numbers, none repeated. The results could be displayed in one or two columns evenly.
My data in cells A11:C12 (six numbers) are all different so the results should yield (20) different 3 digit numbers, none repeated. The results could be displayed in one or two columns evenly. I also wanted to know will I be able to edit the macro to concatenate 5, 6, 7, 8 or even 9 numbers into 3 digit numbers without duplicates. If so, how can this been done? The results would be 5#'s:10 results; 6#'s:20 results; 7#'s:35 results; 8#'s:56 results;
9#'s:81 results.
I have included a sample file.
I need to know how can i remove unique numbers from excel and leave only duplicated?
View 7 Replies View RelatedI need a macros to fill 2000 rows with unique random numbers from 1 to 19 in B2:T2001 area. Every row like this
14 11 12 7 18 13 19 5 6 16 9 4 8 15 1 3 10 2 17
Actually it's about random positions in rows for numbers from 1 to 19.
i'm currently trying to count the number of unique numbers in a Column using this formula:
=SUMPRODUCT((A3:A3002<>"")/COUNTIF(A3:A4002;A3:A3002&""))
So far so good.....But I want to add some conditions like only count the numbers that meet the condition say N1:N3000="SE*"
=SUMPRODUCT((A1:A3000<>"");(AND(OR(N1:N3000="SE*";N1:N3000="INC*")/COUNTIF(A1:A3000;A1:A3000&""))))
On this one I get #VALUE! and i can't figure out why.
I have also tried to put the AND/OR condition before the actual starting of the array of the SUMPRODUCT but nothing.
formula that turns doubles into unique numbers example:
7788873 = 783
each number is in a cell each....
