I have to create ranges of unique numbers that follows the below rules.
1) Have to start with 3 standard digits (ie 101 or 102 etc)
2) The total length of the is has to be 10 digits (ie 1010123456)
3) The second part (the last 7 numbers) must be unique!
4) Can create a lot of numbers (more that 5000 rows)
5) thats all with the unique numbers
Continue,
Somewhere in the sheet has to be a search function to find where a specific id is located, make it red and copy/cut in to another sheet.
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
I am attempting to create a formula for a project. The multipliers I use will be based off of # of units used. So lets say I have 500,000 units. The first 100,000 would be multiplied by 9.3, 100,000.01 - 250,000 would be multiplied by 9.5 and 250,000.01 - infinite be multiplied by 9.7. I know I can created different cells, but wanted to see if this could be done with one formula. I tried using sumif but that doesnt appear correct.
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
I need to create a series which must look like in third column. This can be done using concatenate and & function but what i need that 01 & 02... must get autogenerarted and i have to use only first two column as source.
i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?
I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.
Code: Sub x() Dim rngTemp As Range Dim rngFind As Range Dim rngFirst As Range Dim rngLast As Range Dim nom As Range Dim strFirstAddress As String
I need to create unique IDs for all of my stock. I would like to use the concatenate function so that the first letter of each products type is taken and then joined onto a unique number. Im not sure how I will do this I was thinking that the formula looks at the largest value and adds 1 so that there are no duplicate numbers added to the first letter of the product type. E.g. the first mother board added will be "M1" the next will be "M2" as the formula has found that M1 exists and has added 1.
I am attempting to create a unique list on column B of tab "1" from columns B of tabs "2" through "5" for which i have the following array formula thus far,
I have a big keyword list saved in Excel. Something like the following,
These are all keyword phrases;
car rent car hire cars for rent uk etc etc etc
All listed in Column A
All phrases in Column A, and in separate rows.(1 phrase per row.)about 2000 lines (Rows) in total.
What I want to know is there any way of selecting the whole list and exporting it (To save it as another list. A list of just unique keywords?
So, It would create a list like; car rent uk hire for etc etc etc.
So basically I want excell to look at all the words and export them to another list showing just unique keywords, 1 per line.
This is so I can see from a huge list what all the unique keywords are. Is there a way of doing this within Excel Now?? or has someone made a plugin ( Macro) to achieve this?
I've looked at the sort & filter options, but it doesn't appear to have this function?
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559 Pallets: 3 Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code To Zip Code Pallets Weight From Weight To
I want to find the number of similar values contained in a column based on a date range I specify.
I have a data set that's formatted like the following (you can see the full data set at [URL] but I've hidden the irrelevant columns and highlight the relevant ones)
[Code] .......
I want to use this data to create two types of graphs. One showing the ratio including all values in the Status column. There are 4 total (Open, Lost, Won, Won-Job Cancelled). I want another which excludes the "open" status from the ratio figure. I've create some images demonstrating what I want to accomplish at [URL] .....
Additionally, I want to be able to specificy date ranges for these charts. Specifically 0-30 days from todays date, 30-90 days and older than 90 days.
I want to accomplish this using Google Sheets (the latest version) and know how to use the graph total. It's just creating the data the way I need it which is proving to be the most challenging.
i have a table of tools and their properties which i am using to provide validation lists for a number of other worksheets that record when those tools were last calibrated/tested and when they need to be calibrated/tested next.
many tools require more than one form of testing (electrical and/or calibration), but not all tools require both.
can i create some kind of drop-down menu the looks at the tool master list, but only gives the option of those that require the particular type of testing i'm recording on that particular list? how can i create a drop-down list that is more limited than the range i have selected for it to display?
I have a problem in terms of summing unique numbers in a set of reoccurring numbers. Due to the restrictions in the spreadsheet I am unable to use a filter / advanced filter or pivot table. What I basically want to do is sum every time there is a different number. In this case it's:
37.85+80.61+129.38+185.85+1259.69+104.96
The unique numbers have a maximum of 6 and a minimum of 3. Is there a generic formula that I can apply so that it only counts / sums the number once. I can use VBA code or just a simple array. I'm just not familiar with any sort of functions that can do this.
I currently have a list of companies. I want to create a unique list of these companies which I can use for some irrelevant purpose. What i did was I started recording a macro in which I first deleted everything in the spreadsheet. Afterwards I copied the whole company list from another spreadsheet and pasted it as values into the new spreadsheet. Afterwards I made an advanced filter; list range being the companies and copied it into a new location after making sure I had said yes to unique only.
I am creating an excel worksheet. Every time a user opens the worksheet (from a template), I want to get the next numeric sequence number as a reference, showing it in the sheet. The template is available to multiple users but the sequence number should be unique, ie if user Tom has sequence 1, Jerry will get 2, then Anne will get 3 and Tom's next one will be 4. I considered an ASCII text file with a number in, eg 1. Upon opening get OPEN text file, READ text file, Convert to numeric.. add 1.. use this. Convert to string.. WRITE text file. It seems clumsy and since I can only open with READ or WRITE (append no good, since I want only 1 value held), the READ allows multiple users to access simulataneously, and potentially get the same sequence.
Is it possinle to: LOCK file OPEN file for read READ file CLOSE file OPEN file for write WRITE file CLOSE file UNCLOCK file
There are likely to be several users accessing the template and the chance of them opening it at the same time is limited, but possible.
I need to count the unique for a customer. The areas to be counted are separated by blank lines. At present, I am using sumproduct(1/countif(range1,range1), to count the unique items. This formula works perfectly except that it takes me almost an hour to do this for all the measurements. Is there a macro that can provide me with the same results -- putting the same values where I am presently have the formulas (the cells that before the blank lines)?
I'm scrambling my head to put this together. Could somebody show me how this is done? I have two rows of data that contains dates in the mmm-yy format. The first row is the start date of the activity and the second row is the end date of the activity. Thus, in each column i would have an activity with its start and end dates. If i want to total the number of months taking into consideration only unique months (counting over-lapping months just once), how do i do that? These dates could have breaks in between, too. Like if an activity ended Jul-08, the next could begin Dec-08. I am able to count the months using the datedif function, is there a match or other function that i need to use?
I have values in Worksheet 1, spread over A1:D25 and A200: D250.
In worksheet2 I have values again from A1:D25 and A200:D250.
Is is possible to only get the unique values of those 4 ranges with the advanced filter? They all need to be shown in eg worksheet 3 starting in A1, (so kinda merged in a sense)?
Is that a thing more for a UDF, or is there a excel function/option that does exactly that?
I have been looking for ages for that kind of function/option, since I thought it must be possible. But this sure does not look to be a standard functionality, or is it? Is there a (free) add-in that might do this kind of thing?
I found this code on some office help page:
Sub SortAllRangeData() ' Place column header for temporary sort area. Range("IV1").Value = "Numbers"
It kinda does what I needed, but it lists the actual data in the same spot it used to be. I want to be able to list the sorting in a different column on a different sheet and in 1 column only. Is this difficult to modify so it becomes a UDF or is this something totally different?
I have two lists of values in separate columns with condition in adjacent cells, all on the same sheet
List 1 consists of numbers from 1 to 12, column to the right is either blank or Free List 2 consists of numbers from 13 to 24, column to the right is either blank of Free
List 1 starts in A2, B2 is either blank or Free List 2 starts in D2, E2 is either blank or Free
In column G, from G2 i want it to list all values from List 1 and List 2 where their status is Free
Is there a way to add cascading lists (from data validation or form/activex controls) to my excel spreadsheet WITHOUT using named ranges? Maybe structured references?
I need to avoid the named ranges because it will cause my workbook to have duplicate named range titles which I cannot avoid.
As a general example my issue arises because I have something like this where the titles are the same but they map to slightly different data. These also have to be cascading because the titles align to another list which I do not show in the example. I also considered using pivot tables, but the issue there is that the data validation lists repeat in the same worksheet. So I would have 3 cascading lists in row1 dependent on each other, but the same 3 lists in row2 dependent on row2 but not the previous row.
I have a spreadsheet with some calculations and the part i am interested in is data in R4 : V58
In this R4:R58, S4:S58 and T4:T58 have some rows that have False because of IF calculations that put False in some rows of R and hence in S and Hence in T.
For example, R15="FALSE" so will S15 and T15 be. Col U is based on whether the corresponding row in R is False or a number. If a Rown in R is false, the row in U= 0 else the row in U is the same as in the same row of a different column - Col I
Col R, T and U are numbers. Col S is text
For example:" R S T U False False False 0 False False False 0 False False False 0 55 DEF 3 15 46 XYZ 2 67 False False False 0 False False False 0 23 GEF 4 43
I want a table in another worksheet that will sort through this using a formula and print
If I can define things like where the table will be placed in the new worksheet etc, that will be a bonus..But It appears I cannot understand how to do this at all..
I gather two lists of serial numbers (i.e.) from two different sources; one populated in sheet1, A:A (with variable row numbers) and the other in sheet2 B:B (again with varying number of rows)
I am trying to gather a master list of unique serial numbers in sheet3, C:C.
So far I have tried advanced filter, union.range, etc. but couldn't figure work it. I guess some of these columns need to have names assigned to it and have a header.
I have 3 ranges of data which each have a quantity and a length. I want to create from these ranges a list of unique values with the total quantity required of each value (as shown). Inputs on any column may be blank but where there is a length, there will be an adjacent quantity to the left.
I have a list numbered 0 to 300. What I am looking for is a formula to randomly select 150 unique sets of two numbers and list them in separate columns for a competition draw and should appear as per the example below
I am looking for a way to create a random order of numbers in a given range. For example, A1:a100 to be populated with a random number between 1 and 100, but not to duplicate, using every possible number within that range. I use the RANDBETWEEN function to generate the numbers, but I cannot prvent them from duplicating.
