how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................
I would like to validate data but cant quite get the formula right. I have a cell (say F7) that cannot be blank if (say E7) another cell equals a text value (say "S"). Anyone have an idea? I am stumped at this seemingly easy task. I am applying the validation below to F7.
I forgot to add the valid combinations: E7 = P and F7 = Entry: OK E7 = P and F7 = Blank: OK E7 = S and F7 = Entry: OK E7 = S and F7 = Blank: INVALID
I have tried the formula: =IF(AND(E7="S",ISBLANK(F7)),1,0) within the validation window but blank entries are still allowed. I put this code in adjacent cells as a formula, the values are correct either 1 or 0.
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
i have two sheets in workbook named as shtbiz,shtbiz1.
so column A of my shtbiz1 sheet i have 100 datas.the by using following code i can fill the datas of shtbiz1 in column A of shtbiz.
Dim strValItems strValItems = "" Set rngValList = ShtBiz1.Range("A6", Range("A10000").End(xlUp)) With ShtBiz.Range("A6:A10000") . Validation.Delete For Each rngValCell In rngValList If Len(strValItems) > 0 Then strValItems = strValItems & "," strValItems = strValItems & rngValCell.Value
Next .Validation.Add xlValidateList, , , strValItems End With
so my problem is i need to add blank value in the top of the list .ie first value should be blank then other values which read from shtbiz1 has to be followed.
I have a spreadsheet with some cells setup with a drop-down list containing Y, N or N/A
This is being used on a TabletPC but if I make a mistake or need to change back to a blank field I have to invoke the soft keyboard, activate the cell and hit backspace then close the soft keyboard - quite a long-winded procedure just to change an incorrect choice!
What I would like to do is add a blank to the list so if I have to revert back to a blank I can just use the stylus to choose a blank from the chooser list.
How do I add the option of inputting a blank from the Data Validation List bearing in mind I am using the Data Validation Source box for entering my choices directly and not specifying a range of cells?
I have tried adding "" and even a space to no avail.
I am using Data Validation and I don't want the user to go past a cell without putting in an entry. When I leave the box (ignore blank) unchecked it doesn't do anything after I have protected the document.
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
Got a table where I've placed Data validation - List on them.
Placed a macro on a button so that the data on the table where the validation list is placed is transfered to another sheet (same workbook).
What I need is a to modify the macro assigned to the button so that when the button is clicked to activate the macro:
a.) Can identify if there are any blanks on specified cells with validation list b.) Stops the macro from copying the fields to the other sheet c.) Alert the user of the blanks (an alert stating there is a blank would suffice) d.) Alert should preferably be similar to a Stop alert from Data Validation.
Can anyone help? Been reading through several threads but don't seem to find anything that could help me - tried reading a Visual basic thread and now i've got a headache....
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
I have two cells, both of which have drop down lists for options 'a' & 'b'. When one equals 'a' the other should be restricted into only saying 'b' and vice versa. I would also like the user to be reminded that he can only select 'a' once from the two menus. Ideally I would like to do this in a formula rather than VBA?
I have a spreadsheet with some cells which return values using INDEX and MATCH to bring back the entire details of a person based on there membership number. However I require the comments to be attached with the returned values. The comments have there image in, rather than just text.
I have found some answers with vba, which do the process, however you had to manually enter the cell, from which the comment was to be copied from, into a pop up box. This involved finding the box myself to then select the box to take the comment from. In doing this I had found and read the comment, which is the is the process I'm trying to bypass.
I've been pounding away at a project for two days trying to determine a way to identify a solution, to no avail.
Here is some experimental code. Under the assumption that in Column "A", every fifth line contains some text (a, b, c, etc) I want to place a function in column B that would identify the closest occupied cell above and to the left of the cell containing the function. The sub achieves this, but the function has a problem because of the Activecell line. Is there a way to identify the location of the cell containing the function to act as a reference point for the range?
Sub find_last_heading() Application.ScreenUpdating = False x = ActiveCell.Address ActiveCell.Offset(0, -1).Select last_heading = ActiveCell.Text Do Until last_heading "" ActiveCell.Offset(-1, 0).Select last_heading = ActiveCell.Text Loop MsgBox last_heading Range(x).Select End Sub Function cathead(Optional reference)
I need to identify rows where the contents of a given cell are equivalent to the cell below. I have managed to get this working based on iterating through the cells and selecting them both for cutting.
However it doesn't work effectively: It seems to be leaving blank lines in the original sheet and further fails after the first execution. I would be grateful for any suggestions on a good method to perform the following operations: (1)to compare the cell with the cell below I have used
If cell = cell.Offset(1, 0) Then
(2)to act on the rows for the two connected rows
' Loop through rows
Dim TheExtract As String Dim cell As Range
'Application. ScreenUpdating = False For Each cell In Worksheets("Sheet 1"). _ Range("A1", Worksheets("Sheet 1").Range("A65536").End(xlUp)) TheExtract = cell If cell = cell.Offset(1, 0) Then cell.Rows("1:2").EntireRow.Select Selection.Cut Sheets("Test").Select ActiveCell.Offset(3, 0).Rows("1:1").EntireRow.Select Selection.Insert Shift:=xlDown End If Next cell 'Application.ScreenUpdating = True
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
I would like to program an Input Box that looks at the cell next to it to see if there is a value equal to zero in it. If there is a Zero in the cell an Input Box will popup and ask "what was the result". It would keep going down the column until there are no more values in column A.
In this example the Input Box would popup for the second line and the third line and then populate the values entered into C2 and C3 accordingly.