I am trying to Change Multiple cell values using the command button. So once clicked it should change the value in the cells with the value its getting from the Inputbox. This function also changes the cells in multiple worksheets. For some reason its not working and I can't figure the problem out.
Private Sub DateChngButton1_Click()
Dim strDate As Date
Sheets("Summary").Select
strDate = InputBox("Input the date eg. april 2004", Title:="Date Change Prompt")
Range("H4").Select
ActiveCell.FormulaR1C1 = strDate
Range("I18").Select
ActiveCell.FormulaR1C1 = strDate
Range("I32").Select
ActiveCell.FormulaR1C1 = strDate
Range("I46").Select
ActiveCell.FormulaR1C1 = strDate
Sheets("Cover").Select
'strDate = InputBox("Input the date eg. april 2004", Title:="Date Change Prompt")
Range("C22").Select
ActiveCell.FormulaR1C1 = strDate
End Sub
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
I suspect that I can do this with the "Custom list" under "Option", but I need a way to make it more automatic. Otherwise I will write down the whole thing in there instead of making it easier.
I am having some difficulty working out how to activate the SelectionChange command if the user changes a cell in a particular column. Based on the fact that the column number may change the constant in this column will be that on row 7 the name will be "Fund Size".
Therefore my question is how do I get VBA to run my code if a user changes a cell in the "Fund Size" column...and underneath the "Fund Size" header (i.e. row 8 or greater).
I'm trying to write a code to make a number of buttons visible depending on a cell value
I have 10 command buttons all are invisible and I want to show only the first x x is the value of cell "A1" in "Sheet1" (will be from 1 to 10) Command buttons names are default names (CommandButton1, CommandButton2, ... , CommandButton10)
I am trying to create a program to automate the gauging figures on oil barges, currently everything is done by hand and takes approximately 20 minutes to complete. I have the charts entered for the tanks already and have the code set so that when you click on a tank "gauge" it will enter the "volume" which corresponds to that gauge on a totals sheet. Here is where my problem is coming in
The barges are gauged at four points "before loading" "after loading" "before discharge" "after discharge"
I want to set a worksheet as the default page with four command buttons that let the user select which operation he wants to perform. before load figures. after load figures and depending on which operation they select have it enter the volumes in the appropriate cells on the totals sheet. So if someone selects "loadopen" command button I want the following code to run on my worksheets............................
I have this code for 10 Command Buttons to change the font colour. This is part of a much larger piece of code, but to simplify it, I am just using this Sub ForeColour() Sheet1.Cat1.ForeColor = &HC0& Sheet1.Cat2.ForeColor = &HFF0000 Sheet1.Cat3.ForeColor = &HFF0000 Sheet1.Cat4.ForeColor = &HFF0000 Sheet1.Cat5.ForeColor = &HFF0000 Sheet1.Cat6.ForeColor = &HFF0000 Sheet1.Cat7.ForeColor = &HFF0000 Sheet1.Cat8.ForeColor = &HFF0000 Sheet1.Cat9.ForeColor = &HFF0000 Sheet1.Cat10.ForeColor = &HFF0000 End Sub
In Excel 2003, this code works instantaneously, but I am trying to run the same code in Excel 2000 and it takes 10 seconds. Is there any way that I can speed this up in Excel 2000?
The original file was created in Excel 2003, but I have created a new file in Excel 2000 with the 10 buttons on it and the code and it still takes 10 seconds.
I am looking for a way to alter the appearance of a button when a second one is clicked. I have two buttons, "Yes" and "No", and when one is clicked I would like to 'grey' the font in the other without disabling it, and vice versa. I have tried recording a macro as I go into the button's properties and change the foreground font, but it does not record the font change, only the selection of the button object.
I have 2 rows that can only = 0.5 based on other cells. The 2 cells are then sumed to get a 1 in another cell. In the cell that sums the 0.5's it should show a value of 1. I need to be able to only sum these cells when they see the value of 1.
I have created a command button, right clicked the button and selected 'View Code'. In the code window I've entered the following code:
Private Sub CommandButton1_Click() IB_FB_Hedge_3 Outcome.range(W10:X11).ClearContents End Sub
As soon as I enter the code a message pops up:
"Compile error:
Expected: list separator or )"
Is my syntax wrong? Is the sheet name, 'IB_FB_Hedge_3 Outcome' not allowed?
When I created this code a few minutes before I was not having the 'Compile error' problem, but the Command Button was not working either. When I clicked the command button it would just show the circles at the corners, suggesting that it is still in editing mode and not properly activated as a command button.
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
I've written a very simple script to replace carriage return characters with <br> tags (so I can use the output in html pages) - however for some reason when I loop the script down the cells, it ignores certain cells and works perfectly on the rest.
The only 'variable' I can spot is that the ones it misses tend to be longer cells with more text (the one's that failed were 938 characters and 910 I think).
Can anyone tell me if there is a limit on how big a cell VBA can process and if so, how I can work around this? Is it possible to load and parse each character one by one in VBA or something?
Private Sub CommandButton1_Click() For Each cl In Worksheets("CREDIT (GENERAL)").Cells.SpecialCells(xlCellTypeConstants, 23) cl.Replace What:=Chr(10), Replacement:="<br>", SearchOrder:=xlByColumns Next cl End Sub
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I'm looking to have an excell file shared on a windows network to a simple LAN (samba sharing), and then for a user to be able to click on a HTML link that will launch that excell pile, and to have it populate specific and predeterminined cells with information that will be handed to it by the HTML link from the website.
Think of a CRM web app that href is a link like: "LAN1Filesexcellbook01.xls?Mrs%20Wendy%20Jones?4%20Skin%20Street"
From something like that I would like to launch excell and have Mrs Jones' details populate into the predefined excell sheet. The HTML website can dynamically populate a HTML link depending on the customer being viewed.
So I'd like to know how two things
1) How to launch a network file in this way, while correctly handing it parameters or switched that it will be able to later: 2) Collect that information and distribute it into the cells I choose in VBA.
I'm familiar with Visual Basic .Net primarily, and have a small amount of VBA experience.
We would like to continue to use Google chrome if possible...
I need the code to calculate the average of 4 textboxes and then put them into the cells, and every time new calculation is given, it is put into the new cell :
i have textbox (1,2,3,4)
my commandbutton needs to the calculation average of the value that is put into those textboxes.
I have a worksheet from which I regularly clear all contents by selecting all the rows and selecting 'Clear Contents' from the right button menu. However, I now have added a formula in Col Y that I want to protect. I know I could select all columns up thru X, but that would clear the R1 headers, so I want to avoid doing that. I can always work around, but I'm curious, is there a way to clear only values and thus protect the formulas when using the Clear Contents command?
Sheet1 A2 = Name (chosen off sheet2) A3 = Job Title (chosen off sheet2) A4 = Department (chosen off sheet2)
Sheet2 Column A = List of names Column B = Corresponding Job Title Column C = Corresponding Department
I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
I am trying to paste data into cells that are offset from specific data in my excel sheet.
The code I've got so far is:
[Code] ....
What I am aiming for is to search my Columns G and H that contain the values 1 & 1. Then from the cells that contain those variables, move 2 row up and 7 columns to the left and then paste on that active cell.
I am completely new to VBA so im sure there plenty wrong with this VBA script but so far ive managed to paste the data but it just pastes across the whole row instead of just the cells ive copied.. now i just get errors on the script.
I have a spreadsheet where I can change the colour of a cell by clicking the mouse, I also have text in many of the cells.
What I need to do is protect (lock) the text so that no one can change the text in any of the cells, but I still want to be able to change the colour of the cells by clicking the mouse in that cell.
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
