Command Button: Copy Row Selected On Sheet2 Into Cells On Sheet 1
Oct 8, 2009
figuring out a code for a command button.
I have 2 sheets open with the following set up:
Sheet1
A2 = Name (chosen off sheet2)
A3 = Job Title (chosen off sheet2)
A4 = Department (chosen off sheet2)
Sheet2
Column A = List of names
Column B = Corresponding Job Title
Column C = Corresponding Department
I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
have two worksheets, "Entry form" and "Database" in my workbook. I am trying to put together a macro button to find the cell value D5(Entry form) in the column A:A (database), if found, copy selected cells (B5:D5,B7,B9) from entry form and paste in the adjacent cells of the row with the value in the database sheet.
VB: 'Match value D3 and replace data Dim sht As Worksheet, outsht As Worksheet, r As Long Dim rfoundCell As Range
I have 9 columns with various data and true/false checkboxes. Column 9 is labelled "Delete" and also contains a true/false checkbox. If column 9 is checked (True) and then a command button is pressed the corresponding row of data is deleted.what would the command button code be.
I'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.
The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".
I am creating a userform in Excel 2007 which requires a user to pick their name from a drop down box then press Ok, what i want to do is disable the Ok button until the user field has been selected.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
I would like some code to allow the user to select any row in Sheet1 and then the populated cells (10 in every case) in that row will copy across to various locations in Sheet2.
eg, The user selects Row header for Row 12 which has 10 cells ( A12 to J12) populated. A12 will go to C3 on Sheet 2, B12 to D5, C12 to D9, etc, etc.
I want to select the rows that i want to copy then I would like a command button to unlock the sheet using password "2014", copy & paste my selection in the last empty row, and then lock the sheet.
I just stuck on the basics. I want to add a new sheet through a macro and a button in the same. I am unable to make it dynamic. it is giving me an error:
Using macro's on Excel 2010. What I'm trying to do is create a macro that will copy a range of cells from one sheet to another depending on a option being selected from a drop down box. I've tried to use formulas but without success. sheet 1 contains a list of approx 20 people with rows containing sales figures per week.
Is it possible to have a macro that will copy the rows to sheet2 depending on the dropdown? The drop down has already been setup with people's names
E.g. if sheet 1, cell a1 (with data validation setup) dropdown contains "mr smith", copy sheet2 row A1:A9 to sheet 1 cell a2 or if sheet 1, cell a1 dropdown contains "mr cooper", copy sheet2 row B1:B9 to sheet1 cell a2 etc... for each name in the dropdown
The idea is so that i select a dropdown and it copies the sales figures that match the dropdown name, if i then select another dropdown, the corresponding figures are copied to the same place.
I have sheet1 having two formulas. Ideally I can copy and paste the formula to the entire column, However this then populates , say 3000 cells unnecessarily which slows down excel performance or increases size of the file.
I am looking for a vba ( this is used to open userform) To include copy formula from filled cell above to next empty row ( cells will be in column K & L)
So every-time userform is opened, the formula is copied to next empty row.
I have a work book that consists of 15 sheets. Sheets 1-14 are for different stores yearly data and sheet 15 will be an overview of the each month but with all the stores on it.
column B-M have the heading Jan-Dec and will have data in the rows below.
What I want excel to do is by using a command button on sheet 15(Overview) update the overview sheet with the data that is in the column, corresponding month that is stated in cell A1 on sheet15 from each sheet of the work book.
In tab Sheet1 there is Commandbuttons named "Sheet2" & "Sheet3". If i press "Sheet2" then i will be directed to sheet2 tab, same as "Sheet3". In tab Sheet2 & Sheet3 there is commandbutton "Sheet1", if i press the button then i will be directed to default tab which is sheet1.
I have a workbook with a large number of worksheets in it. I intend putting the workbook onto a shared network drive so that a number of users can go into their individual named sheet - check some data and confirm that they have checked it.
My initial idea is to attach a command button to each individual sheet so that each user can click on the button to confirm that they have checked their data. What I would like to do is hide a worksheet within the workbook and when each user has checked their data - their button click will insert a tick in the relevant cell of the hidden worksheet e.g.
When User 1 clicks command button on User 1 sheet it will insert a tick in cell B2 of the hidden sheet
When User 2 clicks command button on User 2 sheet it will insert a tick in cell B3 of the hidden sheet
I am trying to create a sheet with 'buttons' on, a bit like a 'linked table of contents', that will take the user to individual sheets (as opposed to clicking on the sheet tabs). I can see how to place Command buttons on a sheet (in this case Sheet1), but I think I need help with the code to make the buttons function as I envisage. Is this in the scope of help via this forum?
I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click() Sheets("WAWF Track").Range("A9").Select ActiveCell.EntireRow.Insert Shift:=x1Down End Sub
When you click on a command button what would the vba code be to copy the data from the active excel workbook active sheet so that it ends up in the active word document?
I want the values from: Cell A1 value in Excel to bookmark name "Text1" Cell A2 value in Excel to bookmark name "Text2" Cell A3 value in Excel to bookmark name "Text3" to be copied into the active word document.
i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
I want entry the data with different row and different cells, so when I click the button, the data on sheet1 is clear and copy to empty row on sheet2 and automatic create a border and automatic insert new row, so we can entry again and next. And I attached my sample Excel File with the description too.
I have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
CASH BK CASHIERS DATE CASH TOTAL DIFF SALES GBP AR GBP AR GBP
[code]....
above is the sheet template we use on a monthly basis. I would to like to use a command button which will run a macro creating a new sheet with the sheet name each month. The idea is to have a text box and a command button,enter the month in the text box and click the button. A sheet for the month to create at end.
I have a workbook with about 53 worksheets one for every week in the year. They are named as follows: VA-1-1-09 TO VA 12-28-09 All sheets are hidden except the (VA-1-1-09)
What I am trying to do is create some logic that would keep all 52 sheets Very hidden except sheet VA-1-1-09 Till the second week starts at that time what I would like to see happen sheet VA-1-5-09 come out of very hidden and appear visible and send sheet VA-1-1-09 to just a hidden state. I like to have this happen for every week of the year? If this can happen automatically that would be great however a command button clicked once a week would do the trick as well.
I have created a command button, right clicked the button and selected 'View Code'. In the code window I've entered the following code:
Private Sub CommandButton1_Click() IB_FB_Hedge_3 Outcome.range(W10:X11).ClearContents End Sub
As soon as I enter the code a message pops up:
"Compile error:
Expected: list separator or )"
Is my syntax wrong? Is the sheet name, 'IB_FB_Hedge_3 Outcome' not allowed?
When I created this code a few minutes before I was not having the 'Compile error' problem, but the Command Button was not working either. When I clicked the command button it would just show the circles at the corners, suggesting that it is still in editing mode and not properly activated as a command button.