This is probably very simple but I'm having a problem finding how to change the color of a bar based on the value. For example, when the bar reaches 100% I want the bar to turn green while the other bars in the graph stay the same.
View 2 RepliesI need to change the colors of each tab based on the cell value in G132.
1>Green
1
I have a spreadsheet that I enter monthly expenditure on.
Column A is expenditure during 24th to 31st
Column D is expenditure during 1st to 8th
Column G is expenditure during 9th to 16th and
Column J is expenditure during 17th to 23rd
Ive been trying to colour the columns grey if todays date is outside the above date ranges each time I open the spreadsheet so its obvious which column my expenditure needs to be entered into.
I am wanting the colors of the bars in a stacked chart to change based on the date in the X Axis. As the current date arrives, the stacked bar needs to change to various blue shades. If the date is in the future, the stacked bar needs to be various grey shades.
View 2 Replies View RelatedI have two ranges of cells containing names of chemicals, call the first one "Product" and the second one "Byproduct".
Also, there are two other ranges of cells, called "Productvalue" and "Byproductvalue". These cells contain the numerical values of products and byproducts. How can I plot both the products and byproducts in the same graph using xlBarClustered in different colors?
How to change the color of a single tabe. What I'm trying to do now is reset the tab color for all tabs.
Here is my code:
'REMOVE TAB COLOR
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
With ActiveWorkbook.ActiveSheet.Tab
.ColorIndex = xlNone
.TintAndShade = 0
End With
On Error Resume Next
Next ws
I'm new to using loops so I'm not exactly sure what the above code is doing. When I debug it goes through the steps without any errors but it doesn't actually change the tab colors.
I am making some grids which will have a series of numbers in the individual cells. But I can't figure out how to change the colors of the digits. If I change one digit to Red; all the numbers in that cell change to Red. Whereas I would like to have them as Red,Green,Black,Blue,etc.
View 3 Replies View RelatedI'm trying to update a workbook with a new look and want to change the cell color based upon what the cell color currently is.
I'm having problems with the code that I created. I just can't seem to get the syntax correct for the code.
For the code below, my Range of A5:D5 is just a test range where each cell should change colors. When completed, my range will be much greater.
Code:
Sub ChangeColors()
Dim Cell As Range
For Each Cell In Range("A5:D5")
[Code]....
I have a few buttons on my page that I would like to change colors depending on the value in cell AI1. Right now this is the code I have:
[Code] .......
What I would like is to add formatting for "rounded rectangle 4" as well. if the cell = 1, number 4 changes color, if the cell = 2 both change color, and if the cell =3 then only 5 changes color.
If cell A1 is the same thing at cell B15 then I would like cell A1 to turn RED. Is there a way to do this?
View 5 Replies View RelatedI'm trying to get a range of cells to change colors. This should happen from VBA code and happen on specified sheet that is not the default sheet when the userform appears that has the button that triggers the event. I have to reference the range with variables because it changes depending on other events.
If I put in: ....
I’m sure conditional formatting is the way forward with this but can’t quite get the formula right. I need 2 columns: Column A will have dates that an event happened on. Column B will be blank until we have received back in a letter that went out on the date in column A. At which point the date the letter was received back in will be entered into column B
What I need is for the Colour of Column B to change from green (before and on the date of Column A) to Amber (for the next 3 days) and then red (from Day 5 onwards. This would be until a date was entered in column B (the date the letter is received back in) at which point it would just go back to white. This would keep a check on how long the letter was out for and whether we need to chase it up or not and with an increasing urgency.
color tabs for Excel 2000 add-on
Any freeware (or shareware if necessary) program that will allow you to change tab colors on spreadsheets in Excel 2000. Later versions do have that ability built in, but 2000 does not.
If a cells value is between to numbers then I need to change the color of that specific cell to green otherwise cell is to turn red. Also all cells without a value defaults to yellow.
View 9 Replies View RelatedI know this can be done, as I have seen it before, but can't seem to figure out how to replicate it.
I have a speadsheet in which I have a drop-down box for a certain column's values. How do I automatically have each independent row's background color change dependant upon the value selected in that row's drop-down cell box (and update color automatically if a different drop-down selection is made later)?
For example:
Row 1: Cell C Drop-Down Value = "Yes"...change row color to GREEN
Row 2: Cell C Drop-Down Value = "No"...change row color to RED
Row 3: Cell C Drop-Down Value = "Maybe"...change row color to YELLOW
I attached 2 examples. The first one is before the screen flickering fix I got from Andy Pope. The second is when I added the fix. When you open Example List 1 and you enter 0 at E180, the screen will flicker, but it will change (red) Watching to (green) Planning to Watch in G180.
When you open Example List 2 and you enter 0 at E180, the screen doesn't flicker anymore. The status Watching in G180 still changes to Planning to Watch, but it stays red while it has to become green. How can I have the color changes and no screen flickering? Marco:
I am trying to format certain cells to change colors depending on the date and the content of the next field to show due dates.
cell label
due date
date completed
c5
au5
be5
c6
au6
be6
c7
au7
be7
c8
au8
be8
What I need is for the contents of au5 to be green up until 10 days before the due date, yellow up until 5 days, and red with less than 5 days until the due date. If the date completed is entered into be5, then the contents of au5 should be black.
Is this possible, and if it is, how do I set this up? I tried to use
=$AU5-TODAY()>=10
And choose green formatting (something I found on yahoo answers), but when I enter the date the text is still the original black font.
I am working on a project where I am virtually almost finished except for a minor change with the pie chart. I am analyzing some data and recorded a macro to do this and also the pie chart for visualization. However, I do not like the color of the default pie chart colors and would like to customize it. How could I change this within the macro I have recorded?
[Code] .....
My pallet lost color-coding - if I hover over each little scare it displays the names for the colors and if I click on them they color the cells with the right colors, but the palette itself lost the visual display of colors except for 8 colors: black, blue, red, magenta, yellow, cyan, and white.
I use color-coding of cells a lot and I find it difficult to work without visual clues. At least the hover-support allows me to get the work done, but with difficulty.
i'm trying to do is have a formula that when certain text is typed into column 'b' (fmc, nmcmc, etc... anyways..) when an airplane is 'fmc' its 'green' and i want the aircrafts tail number block in column 'a' to autofill in with a green color, and when its 'nmcmc, i want it to be red. when its 'bq' i want it to autofill in as yellow.
View 10 Replies View Relatedi'd like to use a macro to loop through a range of cells and change the interior color index based on the cell values (ex. if cell value < 10, set interior to blue, if cell value > 400, set to green) i'm trying a for each loop with an if statement but i keep getting syntax errors, i know this is probably a simple problem but i'm not experienced in vb,
View 4 Replies View RelatedI have a data base in which I classify cells in three colors (green, yellow, and red) on my own. I would like the first cell in each column to indicate if there is a red or yellow cell in it's column. Because red cells are more important then yellow cells, if there is a yellow and a red cell in the column, I would like the red to over ride the yellow and the first cell would indicate red.
So basically, if there is a red cell in the column, no matter what other colors there are, the first cell should show red. If there is only yellow or yellow and green cells, the first cell should show yellow. If there are only green cells or green cells and clear, the first cell should show clear.
I have to make a macheine cycle chart. I have a column containing Step Names and a column containing step time in whole seconds. I need to paste the step names across Row 1 and whole numbers counting to X down colum A. I then need to have each second represented by coloring the cell, for example, Step 1 is 1 sec. and Step 2 is 2 sec. if "Step 1" is in B1 I need B2 colored then for "Step 2" in C1 i need C3-4 highlighted and so on for a variable number of steps. This is my first question so I hope I was clear enough. With this much programed I will be able to make simple changes to tweak it to fit my needs.
View 2 Replies View RelatedI want to change the text color of a grapg using VBA (chart name, data series, x and y axis names and scales changed).
The VBA code for changing text color is:
Code:
Range("A:Z").Select
Selection.Font.ColorIndex = 1
But I don't know how to do this for a graph!
I have never coded for graphs using VBA where when I run the macro it changes to the 20 most recent data values collected. If column "A" is going to house my y-values and column "N" is going to house my x-values, what would be the coding to change the graphs data range?
My Idea: I am thinking to get the 20 most recent values I could use a row variable that would equal
Code:
Cells(Rows.Count, "A").End(xlUp).Row
This would find the last data point entered. I just don't know the proper syntax to manipulate a graph.
I have some excel sheets that are formatted like the following:
COMPANY | TOTAL | R | G | B
company1 | 10 | 255 | 000 | 000
company2 | 20 | 000 | 255 | 000
company3 | 30 | 000 | 000 | 255
...
and so on...
My question is that I would like to have a macro that runs on this basic file and creates a bar graph with the data. Then it utilizes the RGB values in the columns to change the specific bar for that row. So setting the r, g, b as variables corresponding to the columns in the sheet. Also there isn't a preset number of rows in the files.
[URL]
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values
Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR..............................
I have an XY scatter with 40 or so different lines displayed.I want to change the thickness of all of the lines. I dont want to have to try and select them individually and change them. Is there any way to do this? Perhaps changing the default thickness of lines for this type of graph?
View 1 Replies View RelatedI have an 'in-cell dropdown' which looks up two values, Q1 and Q2 I have a range of data by month showing a specific number as below e.g
Month
Count
2012-01
120
2012-02
190
2012-03
200
2012-04
150
2013-05
175
I have a Line graph using this entire table as the source data. What I would like to do is only use part of the data based on what the dropdown cell specifies. For example, if it is set to "Q1", I would like just the 2012-01 and 2012-02 data to show in the graph. If its "Q2", I would like only 2013-03 and 2012-04 data to show in the graph.
how can I change a bar graph horizontal time line from ascending to descending?
View 1 Replies View Related