Create Step Colors Based On Column Of Numbers
Dec 6, 2006
I have to make a macheine cycle chart. I have a column containing Step Names and a column containing step time in whole seconds. I need to paste the step names across Row 1 and whole numbers counting to X down colum A. I then need to have each second represented by coloring the cell, for example, Step 1 is 1 sec. and Step 2 is 2 sec. if "Step 1" is in B1 I need B2 colored then for "Step 2" in C1 i need C3-4 highlighted and so on for a variable number of steps. This is my first question so I hope I was clear enough. With this much programed I will be able to make simple changes to tweak it to fit my needs.
View 2 Replies
ADVERTISEMENT
Mar 3, 2012
Is this possible? If
A B C
0 0 0
0 0 0
1 4 5
2 4 8
0 0 0
0 0 0
0 0 0
2 6 9
8 9 3
3 5 6
0 0 0
In the raw data, the 0s split up the data into different steps. I am trying to create a function that selects the data from the ABC column and puts it into new columns for each step. I.e:
New Columns with:
1 4 5
2 4 8
and
2 6 9
8 9 3
3 5 6
In the raw data files, there will be 10 steps, with a varying length of data.
View 2 Replies
View Related
Apr 30, 2014
I have some excel sheets that are formatted like the following:
COMPANY | TOTAL | R | G | B
company1 | 10 | 255 | 000 | 000
company2 | 20 | 000 | 255 | 000
company3 | 30 | 000 | 000 | 255
...
and so on...
My question is that I would like to have a macro that runs on this basic file and creates a bar graph with the data. Then it utilizes the RGB values in the columns to change the specific bar for that row. So setting the r, g, b as variables corresponding to the columns in the sheet. Also there isn't a preset number of rows in the files.
[URL]
View 13 Replies
View Related
Sep 28, 2013
I have a data base in which I classify cells in three colors (green, yellow, and red) on my own. I would like the first cell in each column to indicate if there is a red or yellow cell in it's column. Because red cells are more important then yellow cells, if there is a yellow and a red cell in the column, I would like the red to over ride the yellow and the first cell would indicate red.
So basically, if there is a red cell in the column, no matter what other colors there are, the first cell should show red. If there is only yellow or yellow and green cells, the first cell should show yellow. If there are only green cells or green cells and clear, the first cell should show clear.
View 1 Replies
View Related
Jul 9, 2009
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values
Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR..............................
View 12 Replies
View Related
Apr 27, 2009
My vb code currently creates a new sheet via "Sheets.add". This new sheet has the default name of "sheet1" which I rename as "tempSheet". I then populate tempSheet with data, save as a CVS file and then I remove tempSheet.
If I stay in my workbook and try to execute the code again, the default name of the sheet it now creates is "sheet2" and not "sheet1" - this is a problem becuase my code is trying to rename "sheet1" "tempSheet" and of course it cant.
View 3 Replies
View Related
Jun 5, 2008
I don't know what exactly is happening, but every step of the macro is happening every 1 second. Literally, the BPM is 60. It will execute a step in the macro every second, when in other macro's i've made, it zips right through as if it was on fast forward.
View 9 Replies
View Related
Apr 4, 2013
I am having trouble with the code for this stepped scale rebate structure
$0 TO $50,000 NET PURCHASES=NO REBATE ISSUED
$50,001 TO $150,000=5% OF NET PURCHASES
$150,001 TO $1,000,000=8% OF NET PURCHASES
$1,000,001 TO $2,000,000=9% OF NET PURCHASES
$2,000,001 AND OVER=10% OF NET PURCHASES
I have the forumula for retro active to 50,000
=IF(O77<50001,"0",IF(O77<=150000,O77*5%,IF(O77<=1000000,O77*8%,IF(O77<=2000000,O77*9%,IF(O77>2000001,O77*10%,)))))
If the customer did 2.5 million. I need a formula that will multiply the first 150,000 by 5%, the next 849,999 @ 8%, the next 999,999 @ 9%, and the remaining 500,000 2 10%. I was thinking of using a min/max function.
View 6 Replies
View Related
Sep 7, 2006
I am having trouble with the code for this stepped scale commission structure.
Net Service
$1,1400
Step Scale Comm. %
$0-500 40%
$500-750 45%
$750-1000 47%
$1000-9999.99 50%
Final Commission Paid $ ?
View 7 Replies
View Related
Mar 22, 2012
I would like to have a sheet where there is a cell designated as "start number" (where any number may be entered) and a cell designated as "how many times". I would then like to be able to click a button and excel generates a list of sequential numbers starting from the number designated in the "start number" cell as many times as is designated in the "how many times" cell.
View 2 Replies
View Related
Oct 3, 2013
I attempting to create a formula that will create random numbers in a column without repeats. For example, I have a spreadsheet with two columns. The first column I want to contain the random numbers and the second column will contain names. I just need the formula to create the random numbers once.
View 2 Replies
View Related
Mar 4, 2009
I have a spreadsheet that will monitor payment schedules, in which both payment frequency and the payment start date are inputted by the user.
As such, to make filling out the column(s) fool-proof, I want to grey out cells in which data should not be entered.
For example, if the payment frequency is every 6th day, and the payments are to begin on day 0, then days 0, 6, 12 (etc) should be left white, whereas the remainder of the cells should be shaded.
I can achieve this using multiple conditional formatting rules in excel2007 with iterations of formulae of the type:
View 14 Replies
View Related
Aug 8, 2007
I have some code which, which I have modified it to create check boxes for all rows of data, but when I run it, it begins to wipe out the data, and create an endless column of numbers and check boxes. Here is the code:
Sub SelectCell()
Application. ScreenUpdating = False
Dim Z As Range
Set Z = Cells(1, 1).EntireColumn. Find("*", SearchDirection:=xlPrevious)
For i = 2 To Z
Range("A" & i) = i
Set cll = Range("A" & i).Offset(0, 1)
For Each shp In ActiveSheet.Shapes
If Left(shp.Name, 8) = "CheckBox" And shp.TopLeftCell.Address = cll.Address Then
shp.Delete
Exit For.......................
I have tried to set it to recognize how many rows are filled with number, give that to variable Z and then apply the code but it simply does not work.
View 7 Replies
View Related
Apr 3, 2014
I have a form in which users will manually enter a date in Column A. I would like to create a formula in Column B which will add 4 days to the date based upon Column A. However, the 4 days should only be added to a select set of dates which I would like to specify. If the date is not found in this select set of dates, then the result in Column B should be the same date as Column A.
View 3 Replies
View Related
May 21, 2013
I need a macro to create a hyperlink i.e....... I have an excel sheet with numbers in column A.....I have files in a folder that matches the numbers in column A....
How would I create a macro to create a hyperlink from the numbers in column A to the "matching" file names in a folder?
View 3 Replies
View Related
Dec 1, 2007
I need to create a function that numbers rows with respect to data groups in a column (column labeled "Type" in this example). The result would be that shown in column A in this table.
How do I write the function?
#TypeName Date
1CarsJohn1/12/2008
2CarsJane11/10/2007
3CarsMary11/2/2004
4CarsBob12/7/2003
1TrucksMike12/12/2007
2TrucksSandy1/3/2007
3TrucksDale12/14/2006
4TrucksVince4/8/2005
*
View 10 Replies
View Related
Jul 7, 2013
My pallet lost color-coding - if I hover over each little scare it displays the names for the colors and if I click on them they color the cells with the right colors, but the palette itself lost the visual display of colors except for 8 colors: black, blue, red, magenta, yellow, cyan, and white.
I use color-coding of cells a lot and I find it difficult to work without visual clues. At least the hover-support allows me to get the work done, but with difficulty.
View 12 Replies
View Related
Jul 13, 2014
When I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?
View 1 Replies
View Related
Jul 24, 2009
I have a model built that calculates the daily Profit and loss ('Data for Pivot' tab, column M). I would like to calculate the cumulative profit and loss and am having a difficult time doing this with a simple formula. The Daily P/L column is empty (#NA value is in the cells) up until cell C138 as there is no data before that (which is the way it is supposed to be). However, once data has begun to be populated the daily profit and loss is shown (in this case from M138 onwards). The issue I am having is that I cannot seem to be able to create a formula that will capture the cumulative P/L. My desired result is evident in cells N179 onwards, as it simply captures the cumulative p/l. However, this only works if I change the formula once data is populated (in this case cell N177 is where i put in a new formula; the previous formula can be seen in cells N3-N176). If I attempt to put in the formula that is in cell N177 for all of the cells in column N, it gives me an error. Thus, I think that this may need to be programmed via VBA, but I have not been successful in doing this. The issue is that the data population in this model begins on different cells based on the different inputs that I put in ('Mov_Avg_Chart' tab, cells c6 and c8). Thus, I can't hard-code a formula based on a particular cell. If anyone can help me with this,
View 8 Replies
View Related
Apr 15, 2009
I am a new member, with not a lot of VBA experience. Sorry for the vague title .. couldn't come up with something ^^". The idea is, I made an list with several anime titles I am watching (in column A) In column G it shows the status; "Watching", "Completed", "Planning to Watch", "On-Hold" or "Dropped". I managed to let the colors of those words change with this
View 4 Replies
View Related
Feb 12, 2014
This is probably very simple but I'm having a problem finding how to change the color of a bar based on the value. For example, when the bar reaches 100% I want the bar to turn green while the other bars in the graph stay the same.
View 2 Replies
View Related
Dec 9, 2011
I need to change the colors of each tab based on the cell value in G132.
1>Green
1
View 3 Replies
View Related
Feb 6, 2010
I have a worksheet with two columns and a few hundred lines. One has titles and the other integers indicating how many times the title needs to be copied to another worksheet or text file.
Existing Worksheet (Input)
TitleA1
TitleB6
TitleC4
TitleD3
Desired Output (Worksheet or Text File) [The entire row, including the integer could be copied as well, if it is easier.]
TitleA
TitleB
TitleB
TitleB
TitleB
TitleB
TitleB
TitleC
TitleC
TitleC
TitleC
TitleD
TitleD
TitleD
View 7 Replies
View Related
Feb 6, 2010
I need a VBA/macro very similar to several I have seen posted here. I have a worksheet with two columns and a few hundred lines. One has titles and the other integers indicating how many times the title needs to be copied to another worksheet or text file.
Existing Worksheet (Input)
TitleA1
TitleB6
TitleC4
TitleD3
Desired Output (Worksheet or Text File) [The entire row, including the integer could be copied as well, if it is easier.]
TitleA
TitleB
TitleB
TitleB
TitleB
TitleB
TitleB..............
View 2 Replies
View Related
Jan 23, 2008
I was going through a thread that is open now about a similar subject: Create Workbooks & Worksheets For Each Group In Table. I tried getting it to work myself but was unsuccessful. I want a code that will create a new workbook for every new Vendor. I tried doing it myself but was getting compile errors... If this is not what I should be using let me know, it works the way I want with just worksheets, i thought it would be an easy conversion to workbooks
Sub PagesByDescription()
Dim rRange As Range, rCell As Range
Dim wSheet As Worksheet
Dim wSheetStart As Worksheet
Dim strText As String
Set wSheetStart = ActiveSheet
wSheetStart.AutoFilterMode = False
'Set a range variable to the correct item column
Set rRange = Range("A1", Range("A65536").End(xlUp))
'Delete any sheet called "UniqueList"
'Turn off run time errors & delete alert
On Error Resume Next
Application.DisplayAlerts = False
Worksheets("UniqueList").Delete
'Add a sheet called "UniqueList"
Worksheets.Add().Name = "UniqueList".....................
View 3 Replies
View Related
Jun 16, 2008
i'm trying to do is have a formula that when certain text is typed into column 'b' (fmc, nmcmc, etc... anyways..) when an airplane is 'fmc' its 'green' and i want the aircrafts tail number block in column 'a' to autofill in with a green color, and when its 'nmcmc, i want it to be red. when its 'bq' i want it to autofill in as yellow.
View 10 Replies
View Related
Apr 5, 2007
i'd like to use a macro to loop through a range of cells and change the interior color index based on the cell values (ex. if cell value < 10, set interior to blue, if cell value > 400, set to green) i'm trying a for each loop with an if statement but i keep getting syntax errors, i know this is probably a simple problem but i'm not experienced in vb,
View 4 Replies
View Related
Jun 27, 2014
I have data in Column C that looks like this:
John
John
John
Ted
Ted
Ted
Gary
Gary
Is there a macro that can create workbooks based on this data. So, i'd have one workbook that would contain all the Johns and all the other data in Columns A -Z, then another workbook for Ted, and so on...
The number of workbooks I need is not fixed. It all depends on how many names are in column C.
View 14 Replies
View Related
Oct 9, 2012
I have a workbook with about 10000 rows of data for about 100 suppliers in Sheet1 and about 15000 rows of same Suppliers payment details in sheet2.
What I am doing now is:-Filter every supplier names in Column A of sheet1, copy all the rows and paste in sheet1 of a new workook & Again copy the Payment details of a same supplier from master file sheet2 and paste the same in sheet2 of this new workbook then save the files with the supplier name as file name in my documents folder code, that filters each suppliers data from sheet1 & 2 and paste in new workbook sheet1 & 2.
View 1 Replies
View Related
Dec 19, 2006
I am trying to seperate singlr column information into seperate column based on the name in the Data 1 column.
Ex.
Data1 Data2 Result 1 Result 2 Result 3
one100one100two200three1
one350one350two450three2
one500one500two600three4
two200
two450
two600
three165
three236
three450
View 3 Replies
View Related
