I am trying to alter the type of operator used in one formula based on the result of an argument in a separate cell generally as follows: If Cell 1 equals something then use the ">" operator, otherwise use the "=" operator. I appreciate this sounds really simple and I'm having a major brain fade as I cannot figure out how to relate the two arguments as follows: [If(Value 1 "Operator" Value2, then do something, otherwise do something else)] where the operator is pre-defined in another formula.
I'm trying to figure out how to reorganize data based on boolean values in two different columns. My goal is to write something in VBA that will look to see if the boolean in the first cloumn is true then procede to check if the boolean in the next column, same row is true. If that is the case, it will take several values from the row and move them to another worksheet. If the boolean in the first column is true, but the second column is not, it will look down the rows of the second column until it finds true then move several values from rows it has passed through. Here is an example of the sample data I will be dealing with.
Date Time Duration Boolean1 Boolean2 6/22/200715:0032TRUETRUE 6/22/200718:0058TRUEFALSE 6/22/200719:0060FALSEFALSE 6/22/200720:0060FALSEFALSE 6/22/200721:0060FALSEFALSE 6/22/200722:0060FALSEFALSE 6/22/200723:001 FALSETRUE
Based on the example data my goal is to move the data in a new worksheet that would look something like this
Date Start End Duration 6/22/2007 15:28 16:00 32 6/22/2007 18:02 23:01 299
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName() On Error GoTo errhandler Sheets(1).Name = Sheets(1).range("d10") Exit Sub errhandler: MsgBox "sheet name is already exists" End Sub
I'm trying to meet set criteria in b5 using AND the first works if both conditions are met in two cells but bur won't on one cell?
Private Sub PTIColours_Click() If Range("b5") > 0 And Range("c5") < 0.149 Then Range("a5").Interior.ColorIndex = 54 End If End Sub
But this dosen't
Private Sub PTIColours_Click() If Range("b5") > 0 And Range("b5") < 0.149 Then Range("a5").Interior.ColorIndex = 54 End If End Sub
I have tried searching for a good example of how to use logical operators on Mr Excel however the search is frustrated by "Small Words" in the search field ie IF, AND, NOT ,OR are too short to search.
I am trying to write some code that will repair errors in a standard workbook. One of the errors is a blank cell that needs to be changed to "325¨¬F ¡Â T ¡Â 350¨¬F". How do I insert these symbols/operators into the VBA code?
I have Three different combinations which are in cell A & B, These combinations are with similar signs as in A1=2- & B1 = 2- (& A1 = 2+, B1=2+). Then I have numbers with no signs which A1 =2 B1= 2. My approach is to limit to these and these combinations only and use a formula which is uniformally applied on these combination. I want A1 and B1 to take only like signs like -- or ++ or without any sign. The rest shd be ignored. IS there a way of sorting two columns which have different combinations liek -- or ++ or -+ into a area where u can apply a particular formula? Hence first i take a number and move signs on the left and then apply this
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due. Column C is when bi-weekly inspection is due. Column D is when monthly inspection is due. Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
My goal from image is to enter a number for example in cell F4 and have in appear in L6 so simply L6=F4 but I want it to be negative if cell M2 reads "Outgo" and positive if cell M2 reads "Intake" as selected from the list. Is this possible?
I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
Sub BrownBH() If Range("Brown!B4:B31") = X Then Range("C4").Value = [#A] Else Range("C4").Value = NT End If End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
Macro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.
Row B is a formula: Copied from B10: =(-E10/($G$2+0.01))+((F10*24)/$G$3)+G10
But I need this value changed in the respective column based on the text of row "D". If it contains "R15", then I basically want the formula to be multiplied by 90% of the original value. And if it contains "R19", then the formula needs to be multiplied by 85% of the original value.
Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE Name Number KEY Date Name1 1 a,b,c 12/1/2011 Name2 2 x 12/1/2011 Name 3 5 one,three 12/1/2011
AFTER Name Number KEY Date Name1 1 a 12/1/2011 Name1 1 b 12/1/2011 Name1 1 c 12/1/2011 Name2 2 x 12/1/2011 Name 3 5 one 12/1/2011 Name 3 5 three 12/1/2011
I have a chart full of different names which I need to separate them by color when a specific entry is found in a Cell. For example the list has the store name "ZELLERS" + its branch number. (ex. ZELLERS #276 PL or ZELLERS #295 SL and so on). I would like to modify the below code so that It only check for the name ZELLERS and not the branch number. If it finds ZELLERS in any cell In the Range of C1:C500 then color it Red.
Below Code does that but I have to write the exact name as it appears in the cell otherwise it wont find it for me. Is there any way to resolve the issue? I am not an Excel Programmer but Only an Excel user.
Option Compare Text Private Sub Worksheet_Change(ByVal Target As Range) Set r = Range("C1:C500") If Intersect(Target, r) Is Nothing Then Exit Sub End If On Error GoTo Endit Application.EnableEvents = False vals = Array("ZELLERS #276 PL", "ZELLERS #295 SL", "Gopher", "Hyena", "Ibex", "Lynx") nums = Array(3, 46, 6, 3, 7, 4, 20, 10, 23, 15) For Each rr In r..........................
I have a spreadsheet I use to track supplier information. On the second tab of the spreadsheet, I have a table that is auto-populated based on the first spreadsheet and is linked to a KPI reporting form that I run for each supplier every month. The information on the report changes as a supplier is picked using a simple data filter. I would like the supplier name on the KPI form to change to the supplier that is picked from the filter on the first spreadsheet.
I need to include a prefix of +91 and +911 based on a text in column A. If any cell in column A has a specific text and when I enter a number in corresponding cell in column B it should add a prefix number as below.
If any cell in col A has text "STATE LINE OR MOBILE 1" then the corresponding cell in col B should add a prefix of +91 to whatever number I enter in that cell of col B.
If any cell in col A has text "MOBILE 2" then the corresponding cell in col B should add a prefix of +911 to whatever number I enter in that cell of col B.
If any cell in col A has any other text then the corresponding cell in col B should be the same number as I enter in that cell of col B.
I'm putting the sum of 3 cells in a 4th cell(D2). If the sum is greater, I would like the sum to be the color green. If the sum is less, I would like the sum to be the color red. Is this possible?
(D2) has change value, I want to compare the new value against the existing one.
Sheet1 has a list that changes based upon input in Sheet2 So, I have reference pictures on Sheet2 that I would like to show on Sheet1 under the corresponding value.
Explanation: on Sheet two a value is assigned (in column B) to each category (Column A) and then it is ranked (Column C)
Sheet 1 lists the categories in rank order. I want pics to show under each category.
I saw some articles online, but have been unable to make it work.
I'm trying to set up a spreadsheet to track 20 vehicles mileage, and when they are due for an oil change. I have the value of when they are next due in column D, and the actual mileage in column G. I want to have the row for each vehicle turn yellow when they are within 1,000 miles of needing an oil change, and red when they are due/overdue.
I have been trying to figure out how to change the color of a specific tab based on information being entered in cell "B9" for each sheet that the tabs represent. If there is information in cell B9 on "tab 1", I want only tab 1 to change a color. If there is no information entered in cell B9 of tab 2, then I want tab 2 to stay with its default color.
There are 34 tabs I want this to happen to, out of just more than 60 total tabs on the worksheet.
