I'm trying to figure out how to reorganize data based on boolean values in two different columns. My goal is to write something in VBA that will look to see if the boolean in the first cloumn is true then procede to check if the boolean in the next column, same row is true. If that is the case, it will take several values from the row and move them to another worksheet. If the boolean in the first column is true, but the second column is not, it will look down the rows of the second column until it finds true then move several values from rows it has passed through. Here is an example of the sample data I will be dealing with.
Date Time Duration Boolean1 Boolean2
6/22/200715:0032TRUETRUE
6/22/200718:0058TRUEFALSE
6/22/200719:0060FALSEFALSE
6/22/200720:0060FALSEFALSE
6/22/200721:0060FALSEFALSE
6/22/200722:0060FALSEFALSE
6/22/200723:001 FALSETRUE
Based on the example data my goal is to move the data in a new worksheet that would look something like this
Date Start End Duration
6/22/2007 15:28 16:00 32
6/22/2007 18:02 23:01 299
I am trying to alter the type of operator used in one formula based on the result of an argument in a separate cell generally as follows: If Cell 1 equals something then use the ">" operator, otherwise use the "=" operator. I appreciate this sounds really simple and I'm having a major brain fade as I cannot figure out how to relate the two arguments as follows: [If(Value 1 "Operator" Value2, then do something, otherwise do something else)] where the operator is pre-defined in another formula.
I need help creating a code that does the following:
I want a Boolean variable (TheTD) to be True when and only when the value in cell A1 is "TwoOnly". Once it isn't then I want the Boolean to be immediately False. Once cell A1 is "TwoOnly" I want TheTD to be true immediately as well.
I am using a userform and the textbox1_Change macro can change the value of cell A1 while typing. So in other words The Boolean can be changed from True to False multiple times depending on what I type in textbox1.
i need someone that can think through this boolean logically. its been a long day at work and now I'm trying to walk through this boolean thing to make sure my data will post on the right pages.
I have an Excel Macro that will capture inputted customer/vehicle data from an input screen, at the end, based on questions answered, i need to place that data on 1 of 4 sheets in my excel document.
The questions are: Is this a Nationwide claim? (Y.N) (boolean = nw) Is the vehicle here? (Y/N) (boolean = vh)
So here's what i got if NW = true and VH = True then place data on "sheet1" if NW = true and VH = False then place data on "Sheet2" if NW = False and VH = true then place data on "sheet 3" if NW = false and VH = False then place data on "sheet4"
I can't think of how to write this IF statement for this to happen. can't get the logic going.
I have a excel file to keep track of sales pipeline. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows once a task is completed and can be moved to another sheet. In Prospects sheet I have a column for " Stage" and here you have to select from a drop down menu, either "Prospect", "Contacted" "quoted" "WON" "LOST" What I would like, is that once you have selected one of the sales stage, the entire row or entry, will be automatically moved to the right tab from the "prospects" to a new sheet according to each stage.
Error in the code, where I'm trying to copy the data (based on criteria) from one worksheet to another, then delete the data from the first worksheet. In the code (I have complied from this message board) I get an 1004 error "Application-defined or Object-defined error".
Code: Option Explicit Sub CopyALColKYes() Dim NR As Long, c As Range, firstaddress As String Application.ScreenUpdating = False NR = Sheets("Completed-Expired").Cells(Rows.Count, 13).End(xlUp).Row + 1
There is a spreadsheet that I use that has multiple plans in one column for various members. You can see the plan for Robert James and Amanda James is plan 5. If all this information was in column A how would you move the plan type say column C for each member?
For example Column A Customer Name Robert James Amanda James Plan 5 Nikki Martinez James Gross Plan 6
I would like to know if the following problem can be solved using only Excel without any operator intervention. Can a formula be created? If yes I would appreciate it very much
Problem: If B5 = X Move B6 thru K6 to B5 thru K5 And Move B7 thru K7 to B6 thru K6 And than Blank out B7 thru K7
I have a formula sheet that uses an IF statement to determine if one columns data is bigger than another. Out of the 300 or so rows there are approx 20 that come back as yes (this is in column A) and the rest are blank
What I would like to do, is for the 20 or so rows, I would like to pull out (copy) columns B, J and L and put them into worksheet 2. Preferably without any gaps in the rows or columns.
I hope this is enough information, I am using MS excel version 2010 although I think the people who will ultimately be using it are on an earlier version.
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer Dim counter2 As Integer Dim id As Double Dim id2 As Double Dim palletnum As Integer
I have a sheet which I need to arrange and it looks like -
Column A Column B Column C Column D
[Code]...
the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"
Output should be - Column A Column B Column C
[Code]....
so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.
I'm trying to meet set criteria in b5 using AND the first works if both conditions are met in two cells but bur won't on one cell?
Private Sub PTIColours_Click() If Range("b5") > 0 And Range("c5") < 0.149 Then Range("a5").Interior.ColorIndex = 54 End If End Sub
But this dosen't
Private Sub PTIColours_Click() If Range("b5") > 0 And Range("b5") < 0.149 Then Range("a5").Interior.ColorIndex = 54 End If End Sub
I have tried searching for a good example of how to use logical operators on Mr Excel however the search is frustrated by "Small Words" in the search field ie IF, AND, NOT ,OR are too short to search.
I am trying to write some code that will repair errors in a standard workbook. One of the errors is a blank cell that needs to be changed to "325¨¬F ¡Â T ¡Â 350¨¬F". How do I insert these symbols/operators into the VBA code?
I have Three different combinations which are in cell A & B, These combinations are with similar signs as in A1=2- & B1 = 2- (& A1 = 2+, B1=2+). Then I have numbers with no signs which A1 =2 B1= 2. My approach is to limit to these and these combinations only and use a formula which is uniformally applied on these combination. I want A1 and B1 to take only like signs like -- or ++ or without any sign. The rest shd be ignored. IS there a way of sorting two columns which have different combinations liek -- or ++ or -+ into a area where u can apply a particular formula? Hence first i take a number and move signs on the left and then apply this
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P) phone (Q) primary phone (R) col S col T col U
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
I have a timecard spreadsheet which im working on, each employee is represented by a single worksheet in the workbook, and the worksheet is named after the employees name. New employees are added by filling in a form which dynamically creates the timecard based on a template. Im trying to impliment a 'Fire Employee' button which sits on each employees sheet and can be clicked to set an employees working status to false by changing a boolean variable called 'fired' to true.
Ive been looking around the forum but I cant figure out if i should be using public variables or where exactly i should be placing them, so that each employees 'fired' status is set to false when the worksheet is first created, but can be set to true when the 'Fire Employee' button is clicked, this must only set true for that specific employee, and not all employees. If your wondering why i need this, the employees work status will be used on other forms to toggle views etc so thats why a boolean approach is best (at least i think it is if its not to difficult to do)
I have minimal excel knowledge, but enough to get by. I have 2 years in C++ programming.
Here's what I'm trying to do:
I'm trying to create a workbook to keep track of flags we send out, and receive back. We have a lot going and coming, so I figured the best way to do this would be to break down each region on different sheets. But I need to create a check box that says something like, "Yes/No" or "Here/Gone" or something like that. THEN, I need to take that information, and put it on the front sheet of the workbook so I know how many we have in/out total. Does this make sense? I know how I would program this in C++, but excel is a bit different.
once bTest is declared as a Boolean, it becomes equal to FALSE (I checked this after much head scratching). How does one assign a value to a boolean variable only after you make your test.
Sub foo()
Dim bTest As Boolean
If Range("a20").Value = False Then bTest = False '
I would like to construct in VBA "n choose r" Boolean arrays of length n which will give all possible combinations of these variables as you scroll through the arrays.
Typical values of n and r would be 40 and 5 respectively and I'm looking to get the fastest possible output on these 660,000 or so arrays.
I have been playing around with various "for, to" statements but haven't managed to turn out anything meaningful thus far.
I have cells in my Excel sheet that contains boolean values, ie. the values TRUE or FALSE. Is it possible to format these cells so that FALSE is written with red color?
Seems like this one should be pretty easy but I'm stuck... I just want to return a boolean based on whether the currently active cell contains the character "#". I've been trying to use the find method but I can't figure out how to convert a match or lack of a match to a boolean.
