In column A I have different integers entered in rows 2-34. In A1 I have a calculation (= SUM(A2:A34)) to give me a total. When the calculation brings back a total of zero, I would like for the cell to be blank instead of showing the zero. I was trying code such as IF A1 = 0, THEN A1 = "", but can't get the syntax right.
View 2 RepliesI have a table - the first column is quantity, the others are descriptions, prices, etc.
I need to change the font of the other columns to white if the quantity cell is empty.
Jennifer Auto Merged Post;I'm still working on this, making baby steps. This is my code so far:
If Range("B26") = IsBlank Then
Range("C26:K26").Select
Selection.Font.ColorIndex = 2
End If
It works for line 26. Can someone give me a hint about how to make it do the same things for lines 27 through 62? Without having 35 IF statements in my code?
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedHere is the formula that returns a value if found:
=INDEX(Prod!A1:B700,SMALL(IF(Prod!A1:A700=B3,ROW(P rod!A1:A700)-ROW(Prod!A1)+1,ROW(Prod!A700)+1),Nums!A1),2)
When it is not found I get #REF, but is there a way to change a not found match to just a blank cell?
I have the following array formula that works. I am trying to modify it so that on cells where there is no data, the value which appears (#NUM) changes to a "Blank". I am stuck on how to do it.
The array formula is:
=INDEX($C$2:$C$26,SMALL(IF($B$2:$B$26=$B$32,ROW($B$2:$B$26)-ROW($B$2)+1),ROWS($C$32:C32)))
I am wanting to change the background of a cell to red if the cell is blank - Basically this is to highlight in a form any missed important areas...
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The following code opens Word correctly, but has too many tool bars open. I only want the tool bars to be opened, just like when you click on the Word Icon at the bottom of the screen. I do not want the following 3 tool bars to open . . . Drawing, Reviewing & Microsoft Office Live Add-In.
View 2 Replies View RelatedI'm trying to change my code below to count blank cells between a given point "c11" and the next non-blank cell to set a validation list in all the cells inbetween I think this is what I want to do because right now if I insert a row in the middle of the hardcoded range I get an error.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim Add As String, Size As String, Sch As String
If Not rTarget Is Nothing Then
If Not Intersect(Target, rTarget) Is Nothing Then
Macro1
End If
End If
With Range("c11:c52").Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=MaterialList"
.IgnoreBlank = True................
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
i've attached a pivot table where some cells are empty (see GCP tab). i want the empty cells to appear empty, and not as they currently appear, with the word "blank" in parentheses. i am aware that if i enter 2 spaces in any cell and press return, all empty cells in that column will also appear empty. is there any other way to have empty cells in a pivot table appear empty?
View 4 Replies View RelatedIm currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View Relatedin one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View Relatedusing a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I have Excel 2002. If I start the program it opens with a blank workbook, called "Book 1".
If I then open an existing workbook, I have two Excel buttons in the Windows taskbar: the one I just opened, and the blank one titled Book 1.
At work I have Excel 2003. The blank "Book 1" is also there when I start the program, but if I then open an existing workbook, the Book 1 goes away. I like this way better.
My question is: Is this just the way versions 2002 vs. 2003 work, or can I change a setting somewhere to make Excel 2002 close its default blank workbook when I open an existing one?
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g
Started
Finishes
12-Nov-13
12-Dec-13
30-Jan-00
09-Nov-13
09-Dec-13
11-Nov-13
11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
=[@Started]+30
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)
For example if A3 is having value AZ i need the formula changed automatically as below
=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)
Make a cell blank if another cell is blank? This is my formula, it checks two dates. It is in cell M5.
View 4 Replies View RelatedI have a drop down sub pasted to worksheet:
Private Sub ComboBox1_Change()
ComboBox1.List = Array(100, 200, 300, 400)
If Range("I11").Value < Range("N11").Value Then
If Sheets("Profile").Range("K18").Value < ComboBox1.Value Then
Range("I11").Interior.ColorIndex = 2
Else
Range("I11").Interior.ColorIndex = 3
End If
End If
End Sub
I want it to change the cell color on drop down change. How can I modify things to have the change in drop down selection?
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?