Here is the formula that returns a value if found:
=INDEX(Prod!A1:B700,SMALL(IF(Prod!A1:A700=B3,ROW(P rod!A1:A700)-ROW(Prod!A1)+1,ROW(Prod!A700)+1),Nums!A1),2)
When it is not found I get #REF, but is there a way to change a not found match to just a blank cell?
In column A I have different integers entered in rows 2-34. In A1 I have a calculation (= SUM(A2:A34)) to give me a total. When the calculation brings back a total of zero, I would like for the cell to be blank instead of showing the zero. I was trying code such as IF A1 = 0, THEN A1 = "", but can't get the syntax right.
View 2 Replies View RelatedI have the following array formula that works. I am trying to modify it so that on cells where there is no data, the value which appears (#NUM) changes to a "Blank". I am stuck on how to do it.
The array formula is:
=INDEX($C$2:$C$26,SMALL(IF($B$2:$B$26=$B$32,ROW($B$2:$B$26)-ROW($B$2)+1),ROWS($C$32:C32)))
I am wanting to change the background of a cell to red if the cell is blank - Basically this is to highlight in a form any missed important areas...
The following code opens Word correctly, but has too many tool bars open. I only want the tool bars to be opened, just like when you click on the Word Icon at the bottom of the screen. I do not want the following 3 tool bars to open . . . Drawing, Reviewing & Microsoft Office Live Add-In.
View 2 Replies View RelatedI'm trying to change my code below to count blank cells between a given point "c11" and the next non-blank cell to set a validation list in all the cells inbetween I think this is what I want to do because right now if I insert a row in the middle of the hardcoded range I get an error.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim Add As String, Size As String, Sch As String
If Not rTarget Is Nothing Then
If Not Intersect(Target, rTarget) Is Nothing Then
Macro1
End If
End If
With Range("c11:c52").Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=MaterialList"
.IgnoreBlank = True................
I have a table - the first column is quantity, the others are descriptions, prices, etc.
I need to change the font of the other columns to white if the quantity cell is empty.
Jennifer Auto Merged Post;I'm still working on this, making baby steps. This is my code so far:
If Range("B26") = IsBlank Then
Range("C26:K26").Select
Selection.Font.ColorIndex = 2
End If
It works for line 26. Can someone give me a hint about how to make it do the same things for lines 27 through 62? Without having 35 IF statements in my code?
i've attached a pivot table where some cells are empty (see GCP tab). i want the empty cells to appear empty, and not as they currently appear, with the word "blank" in parentheses. i am aware that if i enter 2 spaces in any cell and press return, all empty cells in that column will also appear empty. is there any other way to have empty cells in a pivot table appear empty?
View 4 Replies View RelatedI have Excel 2002. If I start the program it opens with a blank workbook, called "Book 1".
If I then open an existing workbook, I have two Excel buttons in the Windows taskbar: the one I just opened, and the blank one titled Book 1.
At work I have Excel 2003. The blank "Book 1" is also there when I start the program, but if I then open an existing workbook, the Book 1 goes away. I like this way better.
My question is: Is this just the way versions 2002 vs. 2003 work, or can I change a setting somewhere to make Excel 2002 close its default blank workbook when I open an existing one?
I have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedI can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedThe below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?
View 2 Replies View RelatedThe formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View Relatedin one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View Related the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies View RelatedI was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I'm am trying to combine columns B and C in such a way that the result will appear as B: C when C is populated and B alone when C is not populated. I've tried a variety of functions, and I'm unable to get the result I want. This is my most recent attempt:
=IF(C2=ISBLANK, B2, B2&": "&C2)
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
[Code] .....