I have a Password login userform on my workbook for users to enter their username and passwords.
Now i want to make a userform where users can change their passwords.
With the login userform i used a application vlookup function to see if the username and password are corresponding. how can i code a userform to look for the username in column A and then change the password in column B?
Password.xlsm
See attached file for my sample workbook.
What I would want to happen is that I want to be able to use Vlook up by using the Value of the Textbox1 in the Info form and place the vlookup result in the fnameresult box.
Data are in Nickname sheet A:B
test template.xlsm
I am attempting to write a bit of code so that Vlookup is called when a particular cell in my spreadsheet is populated.
Although it seems to be working, it is only pulling in the data in row 1.
An example of the code is below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row 1 Then
If Target.Column = 2 Then
[Code]....
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
I have a search feature that will display several results based on the criteria of the search. I also have a Vlookup set so when the topmost name appears in A5 cell the, vlookup shows info for that person across several columns. However if the search shows several people with the similar names then the person I want may not be in the topmost box (A5). Is there any way that I can click on the cell with the correct persons name (may appear in A10) that will change the value in the vlookup command and show the details of the person I can't copy the vlookup down for ten rows as there is other info there. I have room for one row for the vlookup command to fill.
View 2 Replies View RelatedI have one sheet from which work is assigned to 10 different employees. Its format is something like the following:-
document number assigned to status remarks
12345678 john
45678910 steve
11247511 john
The individual sheets are then saved and assigned to all the employees.
document number assigned to status remarks
12345678 john approved
11247511 john denied info req
Now I want to update the data in the sheet by something like this
document number assigned to status remarks
12345678 john =vlookup(A1,[empname.xls]Sheet1!&A:$D,3,0)
45678910 steve
11247511 john
I got to know that indirect can be used for this.
I have found this code that, with changes, I can make work with the cells and columns I am using. What I cannot see is how to make more than one cell change colour rather than just the cell in column J.
How can I change the code below to change several cells in the row? I will be using cells in columns A:F.
Data will be entered into the rows from A2 to E2, in F2 a vlookup will enter one of the values, "High", "Medium" etc.
Each of these values has a colour assigned. The code below, with alterations, will be able to colour the cell in F2 depending on which value is entered. I need the whole row from A2 to F2 to be coloured.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ChangedRange As Range
Dim r As Long, iCol As Long
Set ChangedRange = Intersect(Target, Columns("F:H"))
[Code] ......
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
what I would like to do is view a cell result in my userform with out deleting my formula
It works perfect from the excel side but I just cant get it right from the user form side
Ok so cell D6 contains a vlookup formula. I want the vlookup result to appear in my userform. I can get this to work but it overrides the vlookup formula with the result. This means that when I go to use it again it just shows the same result.This is what I have:
Cell D8 has a Combobox with a list of names to select from
this is the formula in cell D6 =VLOOKUP(D8,B107:I754,2,FALSE) This retrieves the selected customers account number from the combobox. I need my userform to display the account number with out erasing the formulas because I will need to search for more account numbers after.
I have named the textbox in my userform Customeraccountb
I am trying to use the vlookup function but the range of reference has that little green triangle in the corner and if I f2 each cell that triangle goes away and the vlookup function works great. Do you know what is going on here? And also, a quick way to convert all the cells with the green triangle to be without the triangle in a whole range? I don't want to have to go to each cell individually and f2. I've attached an example worksheet for reference to what I am describing. vlookup format.xlsx
View 2 Replies View RelatedColumn A includes a name
Column B includes an age
Column C states a division (this is the column that contains the Vlookup function)
Column G is where I have to put a range of ages (for instance, x=<0,>3)
Column H is where the division name is.
The idea behind this exercise is to use the Vlookup function in column C to reference column G, and return a value in column H. Here a copy of my formula in column C: =VLOOKUP(B3,$G$3:$H$12,2,TRUE). For instance, if Mike (A) is 16 (B) then he would be in the Midget division (C). C is calculated by comparing column B to G, then returning a value in column H. For some odd reason, I can't get column G to reference an age range, such as 1-5 years old.
what I am trying to do but I'll give it my best shot with examples.
A1 = date
B1 = drivefolder[A1.xls]sheetname'!cell
Is there a way to get the vlookup function to return the cell address, rather than the value, of the lookup?
View 9 Replies View RelatedIf I put this in a cell it works fine =VLOOKUP(B3,DateRange,2,0) If I tell VBA to write that formula, it works fine.
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-44],DateRange,2,0)"
If I put this in VBA: Range("AK1").Value = Application.VLookup(Range("B3").Value, Range("DateRange"), 2, False)
I get #N/A. I'm stumped - any ideas why this would happen, or how I can work this into my code? I need the vlookup to occur 1000s of times, and don't want to have to put the formula in the spreadsheet because I just want the results, not the formula.
What I want is that I have a table like below (but it's long for 52 weeks) and long down with Vlookups. I want the formula with which I can just do the copy-paste and it will work. W1, W2.... are the sheet names with exactly the same formats inside.
A
B
C
D
E
5
W1
W2
W3
W4
6
Sales
10
#N/D!
[Code] .......
The base formula (for W1) is:
=Vlookup($a6;'W1'!$A:$B;2;0)
What I want, is the formula which instead of "W1" will write the sheet name which is in a row 5 (basically - cell name which is equal the sheet name), so with just dragging and moving the formula I will got the data from different sheets.
I tried this: =Vlookup(A6;'indirect("c5";1)'!$A:$B;2;0)
But I got #N/D! as in the example, instead of the numbers (yes, I put numbers into W1 and W2 sheets .
Input:
A
B
CA001
CA001
CA001
CA002
[Code]...
Output:
A
B
CA001
CA001
CA001
CA001
[Code]...
1. Insert a row whenever cell value change.
2. Insert cell value (in previous column) in inserted row.
I have just written a function that sums all the values in the cells in a range that are not green. This works however if one of the non green cells is changed to green the function does not work. i have to re input it into the cell that i put it into.
Function SumNotGreen(SelectedCells As Range)
' Adds the values of the cells where the font colour is not green(35).
Dim Cell As Object
Dim x As Double
x = 0
For Each Cell In SelectedCells
If Cell.Interior.ColorIndex <> 35 Then
x = x + Cell.Value
End If
Next Cell
SumNotGreen = x
End Function
How can i make the function recalculate i.e. go back into the loop every time a change is made.
I have problem with a spreadsheet that I am trying to create.
I have a large sheet of data which is dumped in from another program. This contains our deliveries and orders etc.
Now for planning purposes, I would like to see how much of each item I have on order.
I can use VLOOKUP, but that will only give me the amount for the first order it encounters. But not the 3rd, 4th etc. I could use SUMIF but I need the dates as well. After doing some searching I think I have found a way of doing this: I can get the first easier enough:
=VLOOKUP(D$11,'purchase order'!$A$1:$K$6000,5,FALSE), this gives the first order than the another =VLOOKUP(D11,'purchase order'!$A$1:$K$6000,11,FALSE) for its date.
For the second column to check any other orders I thought I could find the cell referance for the first SEARCH: which is
A108: ="A"&MATCH(D11,'purchase order'!A:A,0).
Is there any way of using this Reference to start a new VLOOKUP. So the Lookup Range starts at this reference?? To make things harder it is on another sheet.
how I format the IF function to change the colour of the text in a cell, I know how to use conditional formating but it wont do what I need it to.
The formula I'm using (See Below) only inserts the word "Red" or "Green" in the cell it does not change the colour of the text.
=IF(H6=A1,"green",))
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
How do I change the color of a cell as the result of a logical function?
For example: =IF(A1<A2,A1 is yellow, A2 is yellow).
I saw there were codes to sum or count cells that have a specified Fill Color
http://www.ozgrid.com/VBA/sum-count-cells-by-color.htm
However it says the changing of a cells fill color will not cause the Custom Function to recalculate, I really need to recalculate the data if there are any changes in the selected range
If a INDEX,MATCH function returns a zero, how do I get it to use the value in the adjacent cell which is a unique number?
=INDEX(Sheet2!A:C,MATCH(A2,Sheet2!A:A,0),3)
Example:
I'm trying to do: Let's say I have a simple userform with labels as follows:
(Label1) John's birthday: (Label2) 12.10.1974
(Label3) Mary's birthday: (Label4) 15.03.1978
(Button1) Change Birthdays
Let's say want to change the birthdays I see, so I press the button and enter the new values through another userform with inputboxes.
How do I make that change permanent, so that next time I start the macro in the labels 2 and 4 I have the last entered values for the birthdays???
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)
See the attached example for an illustration of my problem. Essentially, I am trying to reference the first two numbers of an account number when using VLOOKUP. The function then references a table with account classifications based upon the first two numbers of each 10 digit account. This seems so basic, but is driving me up the wall!
View 3 Replies View RelatedI am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have a userform and I'm trying to use VLOOKUP in one of the textboxes to pick up data from a sheet ('Potential'). However, when I run the Userform nothing is happening. I am using the following
View 3 Replies View Related