I have a search feature that will display several results based on the criteria of the search. I also have a Vlookup set so when the topmost name appears in A5 cell the, vlookup shows info for that person across several columns. However if the search shows several people with the similar names then the person I want may not be in the topmost box (A5). Is there any way that I can click on the cell with the correct persons name (may appear in A10) that will change the value in the vlookup command and show the details of the person I can't copy the vlookup down for ten rows as there is other info there. I have room for one row for the vlookup command to fill.
In Excel 2007 I been scanning in the forum for example code. If a cell is clicked on Then highlight the that row from cells A to K. If it is clicked again change it back to no color.
I want to set up a column so that by clicking a cell once it changes value AND color.
For eg a clicked cell changes to green with a value of 1 point, click again it changes orange with a value of 2 points, click again it changes to red with value of 3 point, then finally click again goes back to no fill with nil value.
This would very very useful for marking my candidates results and categorising them by their level of understanding of a question.
I am making a checklist for a Pda program. I need the active cell to highlight green and put an x in it for a specified range. This I have
The next part I cannot figure out - after the cell have been highlighted once, and properly colored with an x, how can I get it to delete the fill and clear the x on the next click.
Dim x As Long Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) ' Set the highlighted cell to a color. If Not Intersect(Target, Range("d28:d34")) Is Nothing Then Target.Interior.ColorIndex = 4 ' green = true 'Set the highlighted cell to contain a text character If Not Intersect(Target, Range("d28:d34")) Is Nothing Then ActiveCell = "x" End If End If End Sub
i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.
The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down
the second problem is the current code allows me to edit locked cell columns A to J ...
I have a Password login userform on my workbook for users to enter their username and passwords.
Now i want to make a userform where users can change their passwords.
With the login userform i used a application vlookup function to see if the username and password are corresponding. how can i code a userform to look for the username in column A and then change the password in column B?
I have found this code that, with changes, I can make work with the cells and columns I am using. What I cannot see is how to make more than one cell change colour rather than just the cell in column J.
How can I change the code below to change several cells in the row? I will be using cells in columns A:F.
Data will be entered into the rows from A2 to E2, in F2 a vlookup will enter one of the values, "High", "Medium" etc.
Each of these values has a colour assigned. The code below, with alterations, will be able to colour the cell in F2 depending on which value is entered. I need the whole row from A2 to F2 to be coloured.
Code: Private Sub Worksheet_Change(ByVal Target As Range)
Dim ChangedRange As Range Dim r As Long, iCol As Long
Set ChangedRange = Intersect(Target, Columns("F:H"))
What I want is that I have a table like below (but it's long for 52 weeks) and long down with Vlookups. I want the formula with which I can just do the copy-paste and it will work. W1, W2.... are the sheet names with exactly the same formats inside.
A B C D E
5
W1 W2 W3 W4
6 Sales 10 #N/D!
[Code] .......
The base formula (for W1) is: =Vlookup($a6;'W1'!$A:$B;2;0)
What I want, is the formula which instead of "W1" will write the sheet name which is in a row 5 (basically - cell name which is equal the sheet name), so with just dragging and moving the formula I will got the data from different sheets.
I tried this: =Vlookup(A6;'indirect("c5";1)'!$A:$B;2;0)
But I got #N/D! as in the example, instead of the numbers (yes, I put numbers into W1 and W2 sheets .
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows: =VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0) but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following: =VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE) The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have this code that ideally should change font color in usedRange to red upon button click. The problem is it's not working and I've been pulling my hair out all day (not that there's much left of it)
HTML Code: Option Explicit Private Sub Worksheet_Change(ByVal Target As Range) Dim UsedRange As Range Dim cel As Range
[Code]....
and the related "End If" this works i.e. if I click on any cell within respective sheet font in used range all changes to Red but I only want this to change on CommandButton1 click which I have inserted in sheet.
I'm working on a sheet which uses a fair amount of indirects, deleting or adding rows bugger these up, so I wanted to replace them with a macro which does if for them and keeps the structure intact. I've sorted the macro to do this and have sorted the macro to replace delete with my delete in the cell RC menu but the row RC menu only seems to work on around 50% of the PC's? All PC's are XP with XL 2003. The code I've used is detailed below. Is this a known issue with XL or something funky with some of the PC's?
With Application . CommandBars("Row").Controls("Delete Row").Delete Application.CommandBars("Row").FindControl(ID:=293).Delete Set cBut2 = .CommandBars("Row").Controls.Add(Temporary:=True, Before:=6) End With
With cBut2 .Caption = "Delete Row" .Style = msoButtonCaption .OnAction = "Delete_Row" End With
I have a spreadsheet where I can change the colour of a cell by clicking the mouse, I also have text in many of the cells.
What I need to do is protect (lock) the text so that no one can change the text in any of the cells, but I still want to be able to change the colour of the cells by clicking the mouse in that cell.
I've been searching all over and can not figure this out as from my limited knowledge it should work. I have two sheets (A & B) and on Sheet A an employee inputs a job number into column B and what I then want to happen is have column D populate automatically with the clients address. This client address is located in Sheet B. I figured the best way to do this was to use a combination of the 'Change Event' method and VLookup utilising a bit of VBA, but I just cant get it to work - I keep getting a #Name? error.
if it is possible to change a cell that the vlookup has found without scrolling all the way to that cell.
I have attached a small sample of my workbook. Once the vlookup has found the item I would like to change the number in G5 and make it change the number below in the OUT column that corresponds with the found item.
Example: row 11 is found with vlookup. i want to be able to change G5 to the number 8which will make G11 the number 8. And then make it stay even after i have done vlookup on another item.
I believe this will require a VBA code. Also I am using Excel 2007. I have added a test page. It is saved in 2007 format. If anyone needs it saved in 2003 please ask.
The formula below (in cell under Product 1) is accurate and works. It simply pulls data from sheet A159CLE. My problem is this formula has to be copied down 400 rows and over 50 columns. At every row change, the formula needs to change to reflect pulling from a different sheet. The sheet names are in Column A1 listed as Display Pog #. I have been using the find and replace to change out the new sheet names, but with 400 rows this gets very tedious.
Is there a way to automatically change the column index number in the VLOOKUP formula when copying the formula to columns? For example, when I copy a VLOOKUP formula from column A to column B, the cell references will change, but the column index remains the same. I'd like the column index to be increased by 1.
I am trying to do a vlookup where the values in the Table_Array have a string appended to them. For example:
I want to look up the string "Example1" and the lookup range is Example1 - monthly Example2 - weekly Example3 - weekly Example4 - monthly
So essentially I want vlookup to only look at the string before the hyphen. My initial thought was to do something like this: vlookup("Example1", left(A:A, 8), 1, FALSE)
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1 2) Paste value into next empty cell in column A (Rows build as students are inputted) 3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
I have an autoshape rectangle which is linked to a cell on my spreadsheet. This cell will auto update whenever i type a number into a different cell (match and index formula).
I want the colour of the rectangle to be green, amber. red or black depending the value my formula brings back. I have managed to do this but the colour does not automatically update. Also when the colour goes black i will need the font in the text box to be white, at all other tines it will be black.
I have an excel file - central database - that holds a lot of raw data organized in tables. There are more than 15 files (dependent files) that access this data using VLOOKUP formulas.
I now need to add a few columns to the central database and these columns can't be after the columns already existing, i.e. they have to be on the left of some of the existing columns. Inserting those columns is going to mess up all the vlookup formulas in the dependent files.
Is there a way change the central database file without affecting the vlookup formulas in the dependent files?
