The formula below (in cell under Product 1) is accurate and works. It simply pulls data from sheet A159CLE. My problem is this formula has to be copied down 400 rows and over 50 columns. At every row change, the formula needs to change to reflect pulling from a different sheet. The sheet names are in Column A1 listed as Display Pog #. I have been using the find and replace to change out the new sheet names, but with 400 rows this gets very tedious.
On sheet1, I want to insert a Vlookup formula that will look in the other two sheets and will return a value (say the variable Y) if two lookup values are met and return a blank if they are not met.
Example. Sheet1. CellA1 = apple CellB1 = 2. I want to search Sheet2 and Sheet3 row by row and if Sheet2 has A and B cells which correspond(a row with "apple" in column A and "2" in column B, return the value Y. If not, return blank. Sheet2 and Sheet3 will never have duplicate values (and if they did, returning a Y would be fine).
I want to change the colour of rows depending on the letter that is in a column. I want it to do it over all the sheets of the document. In the G column there will be letters like 'W' and 'L' that signify something and I want to make it clear by changing the row colour fill. I've tried a few formulas I found by googling but they didn't work. I should point out that the letters are connected, so if I put a 'W' on the second sheet it appears on the first sheet as well.
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows: =VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0) but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following: =VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE) The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
Im trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that months interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. Itd also be great if the formula can be transferred between workbooks. Im not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I want to create a hyperlink to a sheet named "adsf"
I am currently in a worksheet named: "62b Arcus"
I want the hyperlink to be set by grabbing the name from another cell.
For example, In cell h7, I have the text: adsf
In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")
Except, instead of this, I want: =HYPERLINK("h7!")
In this way, i want it to hyperlink to a sheet name based on the text that is in h7.
But neither of these formulas work. Both say the following: "Cannot Open the Specified File"
After reading up on this I have discovered that I must save the file and include the file name inside the formula.
My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:
I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.
=CHOOSE(WEEKDAY("1 Jan " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
where C1 = the year 2006. B1 has the month Jan and I want to input that into my formula, so when I change the month, it automatically will change my formula. I tried =CHOOSE(WEEKDAY("1 $B$1 " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
In some (not all!) of the other sheets the name is located in A48:A54 (only one of the cells but different from sheet to sheet). The corresponding value is located in B48:B54. I would like to return the sum of these values to B14 in my overview sheet.
Likewise I would like to return the values in column C in the other sheets to C14 in the overview sheet and so on until the sum of the values in AA are returned.
I might add several new sheets later on so I would appreciate a solution where I don't need to change the code each time I add a new sheet. VBA solution would be fine
I am trying to create a table which will search for a name throughout several other sheets. All of the same format and layout but with different data. I then need to display information in a different column of the same row of the name I'm searching, just like vlookup.. I also need to be able to search for multiple entries with the same name, so there may be 3 different entries for John Smith thoughout the few dozen sheets.
I have several sheets named by months like 1213, 1113, 1013, 913, 813, 713, etc (month-year) and I'm doing one sheet as an index that needs to find a value across all the sheets.
All the months sheets have a list of names in column A and status in column B. When the business with the name is done, it doesn't appear in the next sheet.
For example "Client A" could appear in 713, 813, 913 (business done) and won't appear in 1013, 1113 and 1213, In the index sheet I want to lookup what is the status for a name from the latest sheet (last updated status).
So I have all the sheets names in a range called months and I want to make a small formula if possible.
I want to start looking in the latest month (sheet) and if that doesn't have any value it goes to the lower one and so on. If I use =VLOOKUP($A$5,INDIRECT("'"&MAX(months)&"'!A:D"),4,0) it shows N/A since the name only appeared until 913 and its looking on 1213.
Right now this is working, but it's too big to understand.
I'm trying to create a VLOOKUP that will return a value in 'Tracking' from 1 of 4 different sheets. If the value isn't found in sheet 1, the lookup should continue to sheet 2. If not found in 2, move to 3 and so on. In cases where there is no value, I would like to return " ".
This formula returns values only in sheet 1. It won't continue to 2 and so on. Also, this will return a 0 for a blank value. If working as intended, 'Tracking' will show "g" in B2 and " " in C2.
I have an excel sheet that contains employee details (Emp. code, Name, Dept. & Shifts for the month) on one sheet (named Manpower) and their respective shifts on other sheets. The emp code in the manpower sheet should be looked up in the other sheets and the corresponding shift on the particular date should be returned. The problem is that since the sheets are arranged by departments the emp code has to be looked up in all the sheets till a value is returned.
I have another query now, similar to the one above. This relates to our Purchase invoice board.
All of our invoices are internally numbered, the info is entered onto the attached spreadsheet. A register, source of all Purchase information. (this sheet was not created by me by the way, its really old and my manager does not want to change it )
I would like to create a spreadsheet of the invoices that i have placed under query, i have set out a simple template at the moment which i use. But i have to input all the info from the invoice on this sheet, I can't help but wonder if the vlookup functon would work on for this.
I would like to enter our internal invoice no into my query spreadsheet and with the vlookup function i would like to retrieve the info from our purchase invoice spreadsheet
Only thing is, our invoice num are continously rolling throughout the year. New numbers are not created for the month, it continues from the last invoice number. However our invoices are filed on a monthly basis (hence the month tabs below).
Is there a way that a lookup function can be retrieve info from several worksheets at the same time in a different workbook?
i have to make it to where when i put a number in it also puts in the description and unit price just by the number i put in to a cell. I am making an invoice... and using a look up table to do the vlookup function but dont know what i am doing wrong
I need to write a formula that looks for a value from column a, find the sheet with a matching value in cell e4 and returns the value of cell ac1 of the worksheet.
This formula will live in column b of the summary sheet.
Example:
Summary Tab
A B 1 19-Jul 19,000(formula result) 2 16-Jul 3 23-Jul 4 30-Jul
Data Tab 1
E AC 1 9-Jul 19,000
It will need to look in cell E1 of every tab in the work book (52 tabs) for the value found in $a1.
I have a list of cusips/numbers in one file and I need to see if this cusip/number is in another file which has three worksheets. So tried this formula and what is wierd that if the cusip is in the first tab it returns #N/A, but if it's the 2nd tab it returns the right answer but if it happens to be in the third tab I get "false" instead. Why only if it's in the 2nd tabe does it return a value? I would combine all of these worksheets but it exceeds the number of rows allowed in the version I have.
I'm pasting the formula...hoping someone can point out what is wrong. I'll break it up to make it easier to read.
I have a workbook that I'm preparing, that has several (appx 60) worksheets, each named for the location they refer to. I also have a summary sheet that highlights the key data/balances. On this summary sheet, I'd like to have certain data refer back to the individual sheets. For example, I have data set up:
Location 1 2 3 etc.
Each additional worksheet is named 1, 2, 3, etc. Is there a way to set up a formula that looks to the cell where it says '1' to direct Excel to the sheet named 1?
I have to look up a specific SS# on three different sheets of the same workbook, because each of the sheets has more than 65536 rows (it is really one list but has to be divided up due to the size). How to make a vlookup formula to look on each of the three sheets? The sheets are named 2-16, 17-33, 34-63.
What I am trying to do is have the contractor name inserted into column B on Sheet 1 next to their respective project.
As you can see each project is only listed on Sheet 2 or 3, not both.
The VLOOKUP formula so far can return the correct name from sheet 2 or 3 but I do not know how to build it into a more complex formula/macro that will do the following: ....
I have found that excel can be the best thing ever and also a nightmare when you are stuck on something. I really apprecciat anyone who can help me out.
In an excel workbook i have a sheet that has rows and rows of Sales Leads.
In column A i put a letter "C" if they have turned into a client or an "X" if the sale was not made.
I am looking for a function that will look at column A and when it sees the letter "C" then copy the entire row across and put the row into sheet 2.....
I have made a spreasheet with 4 sheets. In the 4th sheet are 3 columns: IDCountryZone
There is a button on the first sheet, which when clicked produces an input box. I need the value in the Input box to return which zone that country is in based on the value of the Input Box. E.g. France to return Europe in a message box.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
