How to change part of an array value?.If i try to change array value "Microsoft Excel" popups a dialog stating "You cannot change part of an array."
Somebody have mention to use "Ctrl+Shift+Enter" but this will change entire array value.So I need a change only a specific cell value.
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.
I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".
Is there a way to set an array equal to part of another 2D array. If say I have an array with 5 columns. Is there a way to break that up in to two arrays one with 3 and one with 2. Even getting it to 5 1D arrays would work. I bring it in as 1 array but I need the information in different places. This is actually only the output. So if there is a way to send only part of the array out that would work to. I know you set the range smaller than array with range=array, but that still doesn't get me where I need to be. This is obviously without simply going through a loop. I could set it to 5 singles with a single nested loop I know. I was looking for a non-loop way.
View 5 Replies View RelatedI'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedI have a multicolumn listbox, and a multidimensional array.
I want to put just SOME values of the array into the listbox, but I ger errors using both .list or .column to access single items, and even using .additem .
I have:
dim variable(2000,2) as string
variable(1,0)="aaa": variable(1,1)="bbb": variable(1,2)="ccc"
variable(2,0)="www": variable(2,1)="awasd": variable(1,2)="asdfa"
....
variable(2000,0)="www": variable(2000,1)="awasd": variable(2000,2)="asdfa"
I don't want to store all 2000 elements, just some ones: how can I do it?
I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.
Code:
Sub ClearAndReset()
Dim WS1 As Worksheet
Set WS1 = ActiveWorkbook.Worksheets("Stocks")
WS1.Unprotect
Application.EnableEvents = False
With WS1
[code]....
I'm working on a macro to change the color of the row between column W to AN if in column K the value is "FCA" (without quotes).
So far I have this, but it doesn't work:
Code:
Sub Test()
For Each cell In Range("K1", Cells(Rows.Count, "K").End(xlUp))
If InStr(1, cell, "FCA") Then
Range("W" & cell.Row & ":AN" & cell.Row).Interior.ColorIndex = 3
End If
Next cell
End Sub
In Excell 2000, when you enter a cell by using either the cursor keys or the enter key, the contents of that cell are selected. Typing anything other than the 'F2' key deletes the current entry in the cell, replacing it with what you are typing. This is not the same as double clicking on a cell whereby the cell does not have any of it's contents selected so that when you type the keys are inserted at the cursor position
Is there any way in which this behaviour can be changed so that the first and subsequent characters typed after entering the cell are added to the end of the current contents of the cell ?
Is there a line of code that I can use at the beginning of a macro to unmerge all cells on an entire sheet named "Test1"?
View 4 Replies View RelatedPerhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
I need for it do perform the same action on multiple rows/ cells of data. What adjustment to the code needs to be performed to do so?
Sub fconcat()
Range("C1").Value = Range("A1").Value & Range("B1").Value
For i = 1 To Range("A1").Characters.Count
Range("C1").Characters(i, 1).Font.Name = Range("A1").Characters(i, 1).Font.Name
Next
For i = 1 To Range("B1").Characters.Count
Range("C1").Characters(Range("A1").Characters.Count + i, 1).Font.Name = Range("B1").Characters(i, 1).Font.Name
Next
End Sub
I am getting Run-time error 1004 "Cannot Change Part of a Merged Cell". I am trying to copy Sheet1 cell E11 (merged cells E11:G11) to Sheet2 cell E11 (merged cells E11:G11).
Sub PartBalance()
With Sheets("PART REQUEST")
If Range("D11").Value - Range("K11").Value 0 Then
[Code]....
I have been facing a run time error 1004 ("Cannot change part of a merge cell") when I am to run the following code. I have some merged cells in my excel sheet.
Sub Save2013()Sheets("Invoice").Range("I25:I33").ClearContents
Sheets("Invoice").Range("K25:K33").ClearContents
Sheets("Invoice").Range("K15:M19").ClearContents
Sheets("Invoice").Range("E15:G17").ClearContents
Sheets("String").Range("I58:J58").ClearContents
Sheets("Invoice").Range("T14:V1419").ClearContents
ActiveWorkbook.SaveEnd Sub
Is there a way I can write a formula to get names from a different worksheet if I type part of that name in the active sheet.
Say Sheet1 contains cells like
1026 Wild hard nuts fruits -Named Fgl1026
1028 Wild Soft nuts fruits -Named Fgl1028
In active sheet, when I type Fgl1026, I want the next cell to left of the activecell to show Wild hard nuts fruits.
[img][/img]
I have "inherited" an Excel workbook from someone that is really unwieldy in presentation and difficult to read. I want to break it down and reorder some of the tables and information. To do this I need to copy/ cut parts of different sheets into others. When I do this, I'm finding that I get reference errors even though the source documents are the same.
View 3 Replies View Relatedbuilding a worksheet to list people, payrates and hours worked etc. the header needs to have fill in areas that change with the job so I entered them in the rows rather than in a proper header. what I want to do is get rid of gridlines in the first 6 rows but
leave them intact on the rest of the document. I see templates that this was done somehow.
I have a macro to loop through the files in a folder. The macro will then open up the files and copy over to a new workbook.
As I want to rename the worksheets created in the new workbook as part of the file name. Any idea how to extract the file name out and stored in a string?
Currently it will be named after the Cell A1 in the opened file. However I would like to rename as below.
Example, the file name : 030309_Mary Sales.xls, Worksheet Name to Create : Mary Sales.
File name : 030309_John King, Worksheet Name : John King
(in the code, 030309 taken from my menu sheet,D4 is the keyword , to search in files containing D4, where D3 is the directory to look in)
Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedAttached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View RelatedWorkbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim Rng As Range
Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View RelatedI'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.