I am having a ton of trouble with this. I am trying to add a single text row in between existing data. I have tried multiple loops to try to place an array into Column G, but I cannot figure it out. Is there some coding that will produce the sort of result below in column G?
View 6 RepliesI m trying to use arrays in the wrong way. I simply want to create an array from values in a column and perform calculations on each element and store the results for each element. I therefor need a 2d array. I also dont know the number of values in the column and therefor dont know the number of elements that will be in the array. How would I declare this array. Ive tried Dim MyArr(1 To ActiveSheet.UsedRange.Rows.Count, 1 To 2), but that returns an error - 'Constant expression required'.
View 6 Replies View RelatedBasically, I'm trying to alter the code by inserting another condition where if S12 = R than it will exclude the value found in D12, other wise D12 is included. It was initally setup with a range of $C12:$H12 but i had to write it out long to exclude $D12
Here's my ammended ...
I have 68 cells per sheet and approximately 70 sheets that i need to change to an array function.
Ive changed the formula used using Find and replace but now I need to convert ALL those cells to array.
Is there something I can use to change them all at once. Or am i going to have to go into each cell and F2 CTRL SHFT ENTER?
I only want to include the Month of January in a sumproduct function on another page using a name manager array.
I was thinking of using
=SUMPRODUCT(INDEX(DATA,0,17),--((MONTH(INDEX(DATA,0,5)=1)*INDEX(DATA,0,17))
Where the dates are in the 6th column and include blank cells at the bottom and in the first row it says Date.
I have created (via recording) a very simple macro in Microsoft Word to convert a fraction of the form a/b to the form where a is directly over b with a horizontal line between them (like how you would actually write it in math class). Before I send it to my co-workers, I want to beef it up a little.
Right now, it will only work if a and b are integers or if a and b are words or phrases with no spaces (i.e. change/time will convert correctly but the phrase change in x/change in y will not). Also, it would be great if it could work with parenthesis (i.e. (2x-1)/(2x+1)).
Just so you know, I am very comfortable working with code in order to come up with a beefier macro. However, Word uses Visual Basic and I'm afraid I don't know much about the syntax of that code. So, if any of you know of a site I could view to learn a little Visual Basic or if you know a site that already has good code already written for this purpose, I would be much obliged.
I have a list of names I used in data validation (dropdown list)....I need to add more names to the list....What is the best way to change the range to include new listings? Is the offset function suitable for data validation? How do you use the Offset function in data validation?
View 2 Replies View RelatedI need the values that are copied from the template to copy over in text form from the "Data" Tab. Secondly, the master sheet has multiple lines for each vendor. For the area highlighted in red I'd like for it to copy all cells in column C for the vendor and search the vendor by name. Then, move to the next sheet.
View 10 Replies View RelatedI have two columns of data and cannot get the column to change the format to display as currenty or accounting, with a currency £ sign and comma separator...I select it all and go to Format cells to do the changes, but it does nothing, at all!
View 2 Replies View RelatedIf have very simple =IF function, =IF(F4=H4;1;0) but don't wan't the 'value is true' value when both cells are empty, how do I need to change the function so it states 0?
View 3 Replies View RelatedI can't figure out how to make this formula work because I need to use cell AG46 and it contains an IF formula that leaves the cell blank if the sum = 0. I keep getting the #VALUE! error. How do you create a formula using a cell that has an IF formula that could leave the cell blank?
Basically this is what I need in cell I12:
=sum(a12)-(ag46*8)
A range of cells is populated by numbers and formatted as such, some of those cells contain zeros. How do you calculate a range of cells without the zeros in the range? The zeros skew the results.
View 5 Replies View RelatedI have the code to send a email based on the due date. The email will include the Due date for the purpose below of today 1/14/08 in the message. I cannot figure out how to use Offset in the email message portion to include
The Last and First names along with the Exp Date in the respective column.
Example below: row 3--due date shows up in email message, what would the Offset code be to include Grimm, Paul, Exp Date3, 1/14/08 in the message?
Then the same for row 2, the due date 1/14/08 which the Offset information would be different than line 3?
Since the due date can be in various places how do i still get the Last First and Exp Date"x" included in the message of the email? ....
I am having difficulty trying to solution this:
Row 1 = Dates e.g. 1-Mar - 31-Mar
Row 2 = Day of Week e.g 1-Mar(B1) = Sat(B2) through 31-Mar ending at (AF)
Column A has hourly time intervals
A3 = 0:00
A4 = 1:00 etc to 23:00
Numbers fall into cells by date/day and interval up to today 10-Mar
What I am trying to do at is average the days separated by Weekdays and weekends..so the formula at AG for interval for weekday would be =AVERAGE(D3:H3,K3:O3,R3:V3,Y3:AC3,AF3) weekends (Column AH)would be =AVERAGE(B3:C3,I3:J3,P3:Q3,W3:X3,AD3:AE3)
I want to average the weekdays and weekend numbers without having to group the weekdays and weekends in a custom sort in the final column. That way when I add the data every day, it auto calculates in AG and AH. If I do it as it shows above, the AVG is skewed due to the blank cells.
Attached a sample worksheet.
Want to write an if then that states if a cell ends with (or includes) .com or .org then = "", if not then = "1".
View 3 Replies View Relatedaverage i want to count.
Say i want to count the average from differnet selected cells say
cell A1,B4,C9,D10,E12
and some of the cells have the value 0 in them, so i don't want the formula to include these as long as they have the value 0.
I have tried to divide with a sumproduct and i can get i to work if it is cells next to each other like A1:A20, but not if i want to do it with different selected cells
I would like a cell to show either OK or No depending on the requirements of three other cells as below
G4 is the cell to show a value. For OK a date in G6 must be more than todays date, a tick must be in F6 and a date in D6 must also be more than todays date.
I can get G4 to do each section individually i.e. (A4 has todays date in it, updating automaticaly)
=IF((G6+365)
how do i create a sheetsarray to include all sheets between First and Last? I plan to loop through each sheet in this array to copy data to a summary page, as per [url]
View 9 Replies View RelatedI want to copy cells (include conditional formatting) and paste in mspaint How can i write this code ?
View 9 Replies View RelatedI am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
I am trying to change the variable value in my following code through array.
What I want is that both the statements
Debug.Print testarray(0) & "........" & testarray(1) & "......." & testarray(2)
Debug.Print custname & "........" & custaccount & "......." & worthcredit & vbCrLf & vbCrLf
should deliver me the same values i.e changedname 123456 and true
for testarray(0),testarray(1),testarray(2) i am getting the values but I am not able to change the variable values for custname ,custaccount and worthcredit, although I am accessing the same elements.
Here is full ....
Through VBA is it possible to give a range of cells that should be converted to array formulas? As part of my macro I am copying a sheet from one book to another. This sheet contains a lot of formulas and so as not to keep the reference of the old book I find and replace "=" with "#" and then swap them back after the move. This works fine for all normal formulas but not the Array formulas.
If someone could tell me how to give and range and convert them all to arrays or can think of a better method of moving a sheet from one book to another without the formulas keeping the references to old book.
Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D.
So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
I have only one column (A) with thousands of cell entries. Each Cell contains a date and time. (x/xx/xxxx 12:34:56)
For example, Cell A1 = 1/24/13 18:45:22
I want the new cells to only have the time, but have the seconds removed (and not simply hide the seconds). This is because I'll need to run Conditional Formatting to find every cell with a similar time - but I only need similar times within the same minute...it doesn't matter if the seconds are off.
The new cell should just be A1 = 18:45
The real reason I need this is because I need to find every entry that has the same time (with hour and minutes), which I figure I'd use conditional formatting for. My problem is that many entries have the same time but the seconds are off.
Example:
1/22/13 12:23:11
1/24/13 18:45:22
1/24/13 18:45:36
1/26/13 22:33:41
In this example, I'd want Conditional Formatting to highlight cell A2 and A3 because they have the same time of 18:45 (not including the seconds). I figured the best way to go about this would be to remove the date and remove the seconds, and run the search that way. However, any way to accomplish goal without deleting the date and seconds would be just as useful.
I have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
I have the following array formula that works. I am trying to modify it so that on cells where there is no data, the value which appears (#NUM) changes to a "Blank". I am stuck on how to do it.
The array formula is:
=INDEX($C$2:$C$26,SMALL(IF($B$2:$B$26=$B$32,ROW($B$2:$B$26)-ROW($B$2)+1),ROWS($C$32:C32)))
Code:
Sub TabColor()
Dim mySheets As Worksheets
Dim mySheet As Worksheet
Set mySheets = Worksheets(Array("sheet1", "sheet2"))
For Each mySheet In mySheets
With mySheet.Tab
.Color = 9
End With
Next
End sub
I'm getting a type mismatch at line 4. Can I not group the sheets like this? This is just a test program, my real one would have 10 or more tabs in the array.
How to change part of an array value?.If i try to change array value "Microsoft Excel" popups a dialog stating "You cannot change part of an array."
Somebody have mention to use "Ctrl+Shift+Enter" but this will change entire array value.So I need a change only a specific cell value.
I have been exhausted with a workbook I have been working on for quite some time now, and hope I can get some help here.
I have the following array formula in Sheet1, S2 and copied down to S10051:
I am trying to do a vlookup where the values in the Table_Array have a string appended to them. For example:
I want to look up the string "Example1" and the lookup range is
Example1 - monthly
Example2 - weekly
Example3 - weekly
Example4 - monthly
So essentially I want vlookup to only look at the string before the hyphen. My initial thought was to do something like this: vlookup("Example1", left(A:A, 8), 1, FALSE)