When I run a report, for some reason our system imports certain numbers which have errors, as a consequence when I try and do a pivot table I get a lot of returns showing #div/o!. If you look at the spreadsheet the errors start on line 103 sheet 2 and finish on 2631. Sometime the report can be huge and takes a while to go through these manually to convert to numbers.
View 3 RepliesI'm using this code below to change the background colour of a range of cells:
Code:
With .Range("I18:J18")
.Locked = False
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = 9739376 'RGB(112,156,148)
.TintAndShade = 0
.PatternTintAndShade = 0
End With
I am receiving 'Object doesn't support this property or method' errors starting with the highlighted row. I'm unable to understand where I've erred. Note that range I18:J18 are merged.
Is this method an efficient way of simply changing a cell's background colour?
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
I have a simple spreadsheet for keeping track of gas mileage which I have been using for over two years with no problems. I have five columns A through E and right now I'm on row 72, that's where the problem started. When I enter the starting mileage in A and tab to B it changes the mileage number to a date and as my mileage number I type in changes the date also changes as I tab to B. See the sample below.
A B C D E
15357155968.491 28.14745024239
9/12/19420:00 10.44423.36269628244
The part that puzzles me is it does it in row 72, 73, 74, 75, and 76 then it goes back to working normal, and even though it puts the date in A and zeros in B it does the math right. I looked at column A and B for those rows and there isn't any formulas in them.
I Have a formula in column D =(B72-A72)/C72 and column E is just =B72-A72. Other then that the only other formulas I have is in column B row 177 it gives me total miles, in 178 it gives me total gallons, and in 179 it gives me average MPG.
I have a large spread sheet with about 10 tabs. Is there any way to convert all the formulas to numbers in just one macro.
View 3 Replies View RelatedI have received an excel file from an external source. Every time I change a number in a cell it reverts to a 2 decimal number. eg. I type in 8710 and it converts the value to 87.10. I have looked at the number formats, cleared the numbers format but I keep getting the same result. I have also e-mailed the file to someone else and everything is ok on their computer. Is there a property in the excel program that I need to change?
View 3 Replies View RelatedI am creating a spreadsheet to manage Block ID conflicts when adding mods to a Minecraft Server. Example spreadsheet is attached.
Description: Column A contains a list of available numbers (e.g. 1-20 and 31-50). Column B contains a list of numbers a new mod tries to use up by default (i.e. 1-25). A number in Column B that is not in Column A must be changed to the nearest number that is in Column A. In this example, numbers 21-25 in B are not available in A and must be changed to 31-35, respectively. Column C should be the result of changing Column B (i.e. 1-20 and 31-35).
Issue: The main problem is that as a given cell in Column B changes, that number needs to become unavailable in Column A for the next change. For example, when 21 in B returns 31, 31 can no longer be used for the next number in B (22).
I have been able to use VLOOKUP or INDEX/MATCH functions to lookup the numbers to be changed.
What is the formula to cover multiple different text that could come up? I could have an answer that is NA, Yes and also a blank cell and if I could I would like to have it set up as follows:
NA = -
Blank Cell = 0
Yes = 1
Is it possible for excel to monitor Row J for a letter "Y". If a "Y" is put into a cell in row J a macro runs. If the "Y" was in column 6 I need the macro to copy A6 B6 C6 D6 E6 F6 etc to other cells on a different worksheet.If "Y" was in column 7 it will copy A7 B7 C7 etc to the same other cells on a different worksheet.
View 14 Replies View RelatedI generate a range of random numbers in column C. Then I perform another task and then copy the randoms numbers in the range c4:c(some row) into another sheet.
But the two columns are not the same? I want to copy the same random numbers into the other sheet.
Code:
'Generate random numbers
Lastrow1 = Range("c65536").End(xlUp).Row
ActiveCell.FormulaR1C1 = "=RAND()"
Range("c5:c" & Lastrow1).FormulaR1C1 = "=RAND()"
'Finding a specific row number and copying random numbers
[Code] ........
Is there any formula or easy way to automate the changing of a numeric input into words, eg if you input 100 in one cell, the output in another would be "one hundred"?
View 9 Replies View RelatedI was trying to decrease the decimal places of the data figures that I'm currently working on my report, however, it keeps rounding-up the decimal numbers. I wish to keep the original numbers and just decrease the decimal places.
For example:
The original figure is = 7260.12903225806
Upon decreasing the decimal figures to just 2, the result became = 7260.13
Is it possible for me to just have this result = 7260.12 instead of 7260.13?
I've tried using the TRUNC formula butit does not work if the 2nd decimal value is 0.
For example:
The original figure is = 227161.905808985
Upon applying the formula, the result became = 227161.9 instead of 227161.90
I've 2 worksheets, Summary and Sales. I need to get the total sales figure from the "Sales" worksheet onto the Summary worksheet. Sales data are pasted onto the worksheet monthly. Tried using vlookup but problem is, the column containing the total sales figure may vary and I need to update the vlookup formula. Another problem is that sometimes the Total sales (the lookup value) is not in the first column. Tried using the Index and Match combo but cannot get it to work. I've attached a simple mock up to hopefully illustrate my case better. I believe the experts in this forum should find this rather easy!
View 14 Replies View RelatedTo convert numbers (975,095.97) to thousands (975.1) without physcially changing each one?
View 2 Replies View RelatedWhen opening a .CSV created from a third party software, one of the columns is converted to date format. The numbers are imported in #/# format. and Excel changes most of the numbers to 2-Jan, 3-Jan etc... This would not be that big of an issue if I could simply set it back. Clearing format or changing to text converts it to a 5 digit number.
The only way I have found to get it to work properly thus far is to open a blank sheet and import data and setting the column to text prior to import.
I would like to find a way of opening the CSV file without all the extra steps. Is there a setting that can be turned off?
I have a series of numbers in one column. Is there some way I can divide all the numbers together by, say 10, without doing it manually?
eg.
12
15
15
25
20
should become
1.2
1.5
1.5
2.5
2.0
Is there a way in Excel to do that?
I've got a main workbook (excel 2007) with a main spreadsheet where i group all the information (text and values) about brands and models linked to 10 workbooks (brands) with several spreadsheets (one spreadsheet=one model).
On the main spreadsheet I've got 16 lines for each model which they have the follow formulas, wich are linked to other workbook / spreadsheet (Mar/Gato)
1)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE));"";VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE))
and will return text values
2)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;82;FALSE));"";VLOOKUP(V844;[Mar.xlsx]G!$A$3:$CE$78;82;FALSE))
And will return number values
3)
IF(M844<>"";HLOOKUP($V$3;[Mar.xlsx]Gato!$A$2:$CE$78;2;FALSE);"")
And will return number values. The return value (;2 goes from 2 to 16.
This process repeats to all the 10 workbooks e and 250 spreadsheets
4) Table Array of the model spreadsheet
With regard to formula 1) and 2)
The problem is that the table array (on the model spreadsheet) could have diferent dimensions (becouse the launch year of the model) like this:
A$3:$CE$78 (2009 - Launch year)
A$3:$BR$78 (2010 - Launch year)
A$3:$BE$78 (2011 - Launch year)
A$3:$AR$78 (2012 - Launch year)
A$3:$AE$78 (2013 - Launch year)
And the return column (value) for formula 1) is always ;3;
And the return column (value) for formula 2) are like this:
;82; (2009 - Launch year)
;69; (2010 - Launch year)
;56; (2011 - Launch year)
;43; (2012 - Launch year)
;30; (2013 - Launch year)
;17; (2014 - Launch year)
The difference between above values is 13, it corresponds 12 months and the total column (12+1)
For the formula 3) the table array its the same, the only difference is instead of starting A$3, starts in A$2
5) The update of the formulas 1) 2) 3) for 2014
I'm doing this manually... The formulas are updated like this,for 2013, I've got table array A$3:$AE$78 and the return value (;17, then for 2014 i will have a table array A$3:$AR$78 and the return value will be (;30, and so on
5) Change the network drive
For other reasons I've to change my files to another network drive, something like this:
Q:KPI2014Main File
6) Main Goal
I was thinking using Excel's regular Find and Replace feature to change:
- The network drive designation
- the table array area
- The return value
But I don't know if this process ( Find and Replace) is safe and clean. I'm doing this manually and I've got on the main worbook/sheet 4000 lines with 3 formulas its 12000 operations!I'm on the 350 line....!
The main goal is to update the all formulas (links) to "brand" workbooks and inside "model" spreadsheets automatically with a macro.
why is pivot table changing numbers to dates. It was fine all along, numbers retained the fromat of source data and now, all numbers in field columns are turning into dates. is there a setting I can change to prevent excel from reformatting numbers to dates?
View 1 Replies View RelatedIs it possible to search Excel by cell colour, i.e. font colour...and then change the said colour to another one?
View 3 Replies View RelatedThis may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View RelatedMoving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?
View 4 Replies View RelatedIn cells BS8 I have the following =100*SUBSTITUTE(BR16,"metres","") to get centremetres from cell BR8 and in cell BT8 I have the following
=IF(BS8,ROUND('Under 6 Boys'!D11*(BS8-'Under 6 Boys'!E11)^'Under 6 Boys'!F11,0),"") I get a #Value error
I have also tried
=ROUND('Under 6 Boys'!D11*(BS8-'Under 6 Boys'!E11)^'Under 6 Boys'!F11,0)
In BT8 but I get same error
I have used it in another sheetsheet and it works I don’t understand why is is happening ...
I am using a combination of validation, vlookup and simple formulas to lay out a workorder. If I leave something blank in one of the feilds then everything that comes after say #n/a and won't allow the calculation to complete. Is there a way I can set a default value or something so to make calculate all the feilds that ARE filled in?
View 9 Replies View RelatedI have a workbook with data tabs (one shown here) and a summary tab. Essentially, one inputs hours for people in the Data tab (Tech) that are then calculated/summed to total $ based on rates I have hidden elsewhere in the workbook (not included). I'm trying to bring the subtotal lines (highlighted green) into the Summary tab based on which subtotal and what month/year it is. My formula works fine, except for the fact that it is returning a #Value! due to the "Hrs" heading for each Phase. I don't know why it's doing this because I've not run into sum array issues when mixing numbers and letters before. The error formula is highlighted in yellow in my attached sample, but below is a copy of the formula.
View 10 Replies View RelatedI can not get the following formula to work - I keep getting #Value errors and I've checked the fields and the values are correct
=SUM(IF(Input!$A$6:$A$4006=1,IF(Input!$I$6:$I$4006="DM",IF(Input!$K$6:$K$4006="Bid",Input!$L$6:$L$40 06,0),0),0))
My intension is that if A=1 and I=DM and K=bid then add the corresponding values in L and display. I can't figure out why this formula in another cell and works fine
=SUM(IF(Input!$A$6:$A$4006>0,IF(Input!$A$6:$A$4006<1,IF(Input!$I$6:$I$4006="DM",IF(Input!$K$6:$K$400 6="Bid",Input!$L$6:$L$4006,0),0),0),0))
it is just checking an additional condition of the value in column A
I am using a SUM function with multiple conditions as an array formula.
View 14 Replies View RelatedI am creating a spreadsheet which shows the date of when the training was cpmpleted. I have added an expiry column which gives the date 3 years from start date no problems. The trouble i am having is that the column will return an #VALUE when no training date is entered. ie: the person has had no training so no date can be entered.
I've been using some code I wrote at the start of March to open some files that I've created earlier in the day in order to add to them.
The code worked fine until the month changed. Here is the code I have to open the file I need.
strdate = Format(Now, "dd-mmmm-yyyy")
ChDir "C:DesktopTodays ReportsReports " & strdate & ""
Workbooks.Open Filename:= _
"C:\DesktopTodays ReportsReports " & strdate & "Date Report " & strdate & ".xls"
Since April 1st I have been getting a compile error saying I have the "wrong number of arguments or invalid property assignment".
I am at a loss as to why the code doesn't wok as nothing chaged between March 31st and April 1st.
Having a strange problem with vLOOKUP. Please see the attached file. The result is in cell M1 of the sheet (Link to the file below).
Vlookup works fine if the data is entered manually in cell H1, but with the formula it errors up .how i could make this work with the formula?
Sub indX()
For rwindex = 1 To 4
For collindex = 1 To 10
With Worksheets("sheet1"). cell(rwindex.collndex)
If Value < 0.001 Then .Value = 0
endwith
Next collndex
Next rw
End Sub
I have a code here and i have to spot what the errors are.
I know there is an error with 'endwith' but not sure what to do to fix it