What is the formula to cover multiple different text that could come up? I could have an answer that is NA, Yes and also a blank cell and if I could I would like to have it set up as follows:
NA = -
Blank Cell = 0
Yes = 1
I am trying to type in 4-1 in a cell but can't get it to work, what am i doing wrong.
View 2 Replies View RelatedI have some data in the form of text w/ 8 letters. I'd like to insert a hyphen after the third character. Is this possible using a formula to populate an entire field? Example:
Current format: ABC01234
Desired format: ABC-01234
I am setting up a new chart of accounts, with the format xxx-yyyy, where xxx is a three digit department number, and yyyy is the expense account. I am building a spreadsheet to populate the new chart of accounts to be uploaded into our accounting software. I would like to have a cell that takes the xxx from one cell, adds a hyphen, and combines it with the yyyy value. The result would be xxx-yyyy format.
View 3 Replies View RelatedSome code below which I have inherited, basically its looping through one column of data and removing the text at the beginning before the hyphen eg. '123 - data text' to 'data text'.
HTML Code:
'Remove everything before the hyphen in the activity column
Dim SearchStr
Dim CharOffset As Variant
Range("c7").Select
[Code] ......
I got problem with typing hyphen in the cell. Every time I type it shows something else like C9, D6 and so on.
View 6 Replies View RelatedWhen I use sum function to add a cell containing a hyphen "-" I would get a #VALVE! result in cell 3.
i.e Cell 1 = 8 Cell 2 = -
I have a simple spreadsheet for keeping track of gas mileage which I have been using for over two years with no problems. I have five columns A through E and right now I'm on row 72, that's where the problem started. When I enter the starting mileage in A and tab to B it changes the mileage number to a date and as my mileage number I type in changes the date also changes as I tab to B. See the sample below.
A B C D E
15357155968.491 28.14745024239
9/12/19420:00 10.44423.36269628244
The part that puzzles me is it does it in row 72, 73, 74, 75, and 76 then it goes back to working normal, and even though it puts the date in A and zeros in B it does the math right. I looked at column A and B for those rows and there isn't any formulas in them.
I Have a formula in column D =(B72-A72)/C72 and column E is just =B72-A72. Other then that the only other formulas I have is in column B row 177 it gives me total miles, in 178 it gives me total gallons, and in 179 it gives me average MPG.
How do you sort a column of numbers with hyphens?
Example #####-###-####.
I want to sort by the 3 middle numbers
Excel has went from using the backslash to using a hyphen. If I try to format the cell, all the date choices use the hyphen, what possibly changed?
View 3 Replies View RelatedPlease see attached file. In my column L, I'm trying to find a formula that would reference my column J to the table in the data tab. My problem is the data in column J has a hyphen (-) in the number ex.. 047-258-1 and the next tab does not have a hyphen in between the number...ex 0472581. The correct results in cell L3 would be Walmart. How can I adjust my formula to accommodate this hyphen. Can this also be reflected in my pivot table as well?
View 6 Replies View RelatedWhen I run a report, for some reason our system imports certain numbers which have errors, as a consequence when I try and do a pivot table I get a lot of returns showing #div/o!. If you look at the spreadsheet the errors start on line 103 sheet 2 and finish on 2631. Sometime the report can be huge and takes a while to go through these manually to convert to numbers.
View 3 Replies View RelatedI have a large spread sheet with about 10 tabs. Is there any way to convert all the formulas to numbers in just one macro.
View 3 Replies View RelatedI have received an excel file from an external source. Every time I change a number in a cell it reverts to a 2 decimal number. eg. I type in 8710 and it converts the value to 87.10. I have looked at the number formats, cleared the numbers format but I keep getting the same result. I have also e-mailed the file to someone else and everything is ok on their computer. Is there a property in the excel program that I need to change?
View 3 Replies View Relatedi have two columns with account numbers, i need one column with both account numbers, separated by a hyphen, see below the first line would be 10-15.
10 15
10 20
10 30
10 40
10 41
10 41
I am in need of a formula. I have a number like: 23847-2
I want a formula to take this number and add one to the number before the hyphen. I also want the single digit number after the hyphen to be able to be changed.
So in the end: i want the number copied to the next cell, add one to the portion before the hyphen. Then allow the number after the hyphen to be changed manually.
I am creating a spreadsheet to manage Block ID conflicts when adding mods to a Minecraft Server. Example spreadsheet is attached.
Description: Column A contains a list of available numbers (e.g. 1-20 and 31-50). Column B contains a list of numbers a new mod tries to use up by default (i.e. 1-25). A number in Column B that is not in Column A must be changed to the nearest number that is in Column A. In this example, numbers 21-25 in B are not available in A and must be changed to 31-35, respectively. Column C should be the result of changing Column B (i.e. 1-20 and 31-35).
Issue: The main problem is that as a given cell in Column B changes, that number needs to become unavailable in Column A for the next change. For example, when 21 in B returns 31, 31 can no longer be used for the next number in B (22).
I have been able to use VLOOKUP or INDEX/MATCH functions to lookup the numbers to be changed.
Is it possible for excel to monitor Row J for a letter "Y". If a "Y" is put into a cell in row J a macro runs. If the "Y" was in column 6 I need the macro to copy A6 B6 C6 D6 E6 F6 etc to other cells on a different worksheet.If "Y" was in column 7 it will copy A7 B7 C7 etc to the same other cells on a different worksheet.
View 14 Replies View RelatedI generate a range of random numbers in column C. Then I perform another task and then copy the randoms numbers in the range c4:c(some row) into another sheet.
But the two columns are not the same? I want to copy the same random numbers into the other sheet.
Code:
'Generate random numbers
Lastrow1 = Range("c65536").End(xlUp).Row
ActiveCell.FormulaR1C1 = "=RAND()"
Range("c5:c" & Lastrow1).FormulaR1C1 = "=RAND()"
'Finding a specific row number and copying random numbers
[Code] ........
Is there any formula or easy way to automate the changing of a numeric input into words, eg if you input 100 in one cell, the output in another would be "one hundred"?
View 9 Replies View RelatedI want a format that does not accept the point and put the hyphen CPF.
I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.
I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.
I have a spreadsheet in excel 2003 that has alot of model numbers listed in a single column with a dash. Is their any way I can remove the dash and seperate the numbers into 2 columns?
Current Spreadsheet
Model Number
199-001
200-003
210-081
This is what I'm trying to accomplish
Column B Column C
199 001
200 003
210 081
I was trying to decrease the decimal places of the data figures that I'm currently working on my report, however, it keeps rounding-up the decimal numbers. I wish to keep the original numbers and just decrease the decimal places.
For example:
The original figure is = 7260.12903225806
Upon decreasing the decimal figures to just 2, the result became = 7260.13
Is it possible for me to just have this result = 7260.12 instead of 7260.13?
I've tried using the TRUNC formula butit does not work if the 2nd decimal value is 0.
For example:
The original figure is = 227161.905808985
Upon applying the formula, the result became = 227161.9 instead of 227161.90
I've 2 worksheets, Summary and Sales. I need to get the total sales figure from the "Sales" worksheet onto the Summary worksheet. Sales data are pasted onto the worksheet monthly. Tried using vlookup but problem is, the column containing the total sales figure may vary and I need to update the vlookup formula. Another problem is that sometimes the Total sales (the lookup value) is not in the first column. Tried using the Index and Match combo but cannot get it to work. I've attached a simple mock up to hopefully illustrate my case better. I believe the experts in this forum should find this rather easy!
View 14 Replies View RelatedTo convert numbers (975,095.97) to thousands (975.1) without physcially changing each one?
View 2 Replies View RelatedI have an userform with 10 txtBoxes that I want to have the color changed based off another textbox Values (they will side by side, so when the user enter a value, it will know either it's excelent, good, average or bad based on the colors green, blue, yellow and red).
Is there a way to do so? Because all I have managed to do is to change one txtBox color per time, based on the value entered on the same text box (i.e. if I change the text box which should be changed, nothing changes).
When opening a .CSV created from a third party software, one of the columns is converted to date format. The numbers are imported in #/# format. and Excel changes most of the numbers to 2-Jan, 3-Jan etc... This would not be that big of an issue if I could simply set it back. Clearing format or changing to text converts it to a 5 digit number.
The only way I have found to get it to work properly thus far is to open a blank sheet and import data and setting the column to text prior to import.
I would like to find a way of opening the CSV file without all the extra steps. Is there a setting that can be turned off?
I have a series of numbers in one column. Is there some way I can divide all the numbers together by, say 10, without doing it manually?
eg.
12
15
15
25
20
should become
1.2
1.5
1.5
2.5
2.0
Is there a way in Excel to do that?
I need a VBA function to extract number sequences from a string and separate them with hyphens In the example below cell A1 has the value 'xx2 yyy34 zz515' The code must produce the value '2-34-515' from the above example I have the following function that extracts the numbers but need a way to separate the groups with a hyphen
Code:
Function parseNum(strSearch As String) As String
Dim i As Integer, tempVal As String
For i = 1 To Len(strSearch)
[Code]....
I've got a main workbook (excel 2007) with a main spreadsheet where i group all the information (text and values) about brands and models linked to 10 workbooks (brands) with several spreadsheets (one spreadsheet=one model).
On the main spreadsheet I've got 16 lines for each model which they have the follow formulas, wich are linked to other workbook / spreadsheet (Mar/Gato)
1)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE));"";VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE))
and will return text values
2)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;82;FALSE));"";VLOOKUP(V844;[Mar.xlsx]G!$A$3:$CE$78;82;FALSE))
And will return number values
3)
IF(M844<>"";HLOOKUP($V$3;[Mar.xlsx]Gato!$A$2:$CE$78;2;FALSE);"")
And will return number values. The return value (;2 goes from 2 to 16.
This process repeats to all the 10 workbooks e and 250 spreadsheets
4) Table Array of the model spreadsheet
With regard to formula 1) and 2)
The problem is that the table array (on the model spreadsheet) could have diferent dimensions (becouse the launch year of the model) like this:
A$3:$CE$78 (2009 - Launch year)
A$3:$BR$78 (2010 - Launch year)
A$3:$BE$78 (2011 - Launch year)
A$3:$AR$78 (2012 - Launch year)
A$3:$AE$78 (2013 - Launch year)
And the return column (value) for formula 1) is always ;3;
And the return column (value) for formula 2) are like this:
;82; (2009 - Launch year)
;69; (2010 - Launch year)
;56; (2011 - Launch year)
;43; (2012 - Launch year)
;30; (2013 - Launch year)
;17; (2014 - Launch year)
The difference between above values is 13, it corresponds 12 months and the total column (12+1)
For the formula 3) the table array its the same, the only difference is instead of starting A$3, starts in A$2
5) The update of the formulas 1) 2) 3) for 2014
I'm doing this manually... The formulas are updated like this,for 2013, I've got table array A$3:$AE$78 and the return value (;17, then for 2014 i will have a table array A$3:$AR$78 and the return value will be (;30, and so on
5) Change the network drive
For other reasons I've to change my files to another network drive, something like this:
Q:KPI2014Main File
6) Main Goal
I was thinking using Excel's regular Find and Replace feature to change:
- The network drive designation
- the table array area
- The return value
But I don't know if this process ( Find and Replace) is safe and clean. I'm doing this manually and I've got on the main worbook/sheet 4000 lines with 3 formulas its 12000 operations!I'm on the 350 line....!
The main goal is to update the all formulas (links) to "brand" workbooks and inside "model" spreadsheets automatically with a macro.
