I have 4 condition which change row 3 to different color: example of one - cells on row 3 will change to Blue "=$A$3:$AE$3" on condition =If($AE$3="Absent"; True;False).
How can I repeat this formula for rows 4 to 500. i.e. on each row cells A to AE should change color based on the value of Cell AE?
(Colum A was hidden, MUST be visible to work)
how I can have a formula repeat down a column five times before it changes to another formula? For example. Say on tab 1 I have a list of products. On tab two I have five codes that repeat down the page over and over again. On tab two next to the repeating codes I need to repeat product one 5 times and then skip to product 2 on the 6th row and repeat five times and then skip to product 3 on the 11th row and repeat 5 times and so on?
View 10 Replies View RelatedThis may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View RelatedFormula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
I need to repeat the following copy past macro the number of times equal to the value in column B and repeat the process for rows 3 through 27. It would end up being a loop with in a loop. The data in C3:H3 will be pasted onto the "Fixt#" sheet as many times as the value in column B3. The idea is to create an individual entry on the "Fixt#" sheet for each row on the "Totals" sheet.
Code:
Sub Create_Fixt_SheetI()
'
' Create_Fixt_Sheet Macro
'
'
Range("C3:H3").Select
Selection.Copy
Sheets("Fixt#").Select
ActiveSheet.Range("B" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
I have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2
Adam Wilson 10
Peter Andrews 0
Claire Burrows 6
After macro:
Joe Bloggs
Joe Bloggs
Adam Wilson
Adam Wilson
Adam Wilson
Adam Wilson....................................
I can export inventory data from my Point of Sale system that looks like this:
I need to manipulate it to look like this:
To do so I think I need a macro(?) to:
Copy and insert as many rows as the quantity in Column C. In case of >1 the row is deleted.
This would allow me to print labels for every item in my inventory.
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
and also t = time()
I am working on a workbook with 200+ sheets and an index linking to each of the sheets. On the sheets there is a cell containing the results of calculations and I need the cell referencing the sheet in the index to change background colors depending if the calculations value is greater or less than 0. I currently have working code that also changes the tab color of each sheet depending on the value, but i am trying to add the index cell background change functionality into that. also, the index listings is subject to change. my working code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("d34").Value < 0 Then
Me.Tab.ColorIndex = 3
ElseIf Range("D34").Value > 0 Then
Me.Tab.ColorIndex = 4
Else
[Code]...
and the code i am trying to get working is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngX As Range
Set myRange = Worksheets("Index").Range("A1:A500").Find(Range("C2").Text, lookat:=xlPart)
' the C2 is the reference the title that would be on the index
If Range("d40").Value < 0 Then
[Code]....
I keep getting the runtime error '1004: application-defined error or object-defined error the thing is, i ran the cell background changing code in a normal macro before integrating it in my other worksheet code first and it worked fine. I have a little code experience, though not much in vba and I am unsure what the issue is. if there is another better way to accomplish what I'm tring to do, that would also be fine.
I did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
Quick question, I know how to change a cells background / text color based on it's own value using conditional formatting but what would be the formula to change cell A1's background color based on the value of cell C1?
View 6 Replies View RelatedIs it possible to select a cell on any given row and the value of a cell on that row for example C5 & C6 are shown in cells A1 and B1 respectively? So if the user moved down the sheet selecting different rows the data would change?
View 4 Replies View RelatedI'm trying to change the colour of a row based on the value in a cell (in a column) and am wondering how I can do that. Conditional formatting doesn't allow enough colours unfortunatly. Ive googled it and can only get a cell colour to change not a row colour.
To give an explanation:
Sheet 1: Rows 5 - 100 colour to change based on Sheet 2 Column K5-100.
Column K5-K100 will have values between 0 and 10.
I have a table:......
I want to colour in the relevant cells for each ref depending on the numbers in the stage column. So for the first line, the cells in columns 1,2,4&6 need to be shaded in. For the second line, the cells in columns 1,2,3,4,&5 need to be shaded in. I already have a lot of conditional formatting set on the sheet so need to do this with a macro.
I have tried to write something but am having issues with it finding the 1 and shading in the correct column but then jumping out of the loop and on to the next cell.
I have created two buttons in a worksheet to navigate to two other worksheets. I would like a cell to display 'YES' automatically if one of the two buttons is clicked and or to display 'NO'. I also would like to change the colors of these cells change automatically depending on which button is pressed.
View 2 Replies View RelatedBased on the attached (much simplified) spreadsheet, I want the values in the green cells on the "Month" page (B6:B10) to vary depending on the value in the yellow cell (B4), and for these cells to to look up the relevant column in the "Full Year" page - i.e. if B4 (on "Month") = Jan, look up C6:C10 in "Full Year"; if B4 = Feb, look up D6:D10, and so on. I know I can nest IF functions in order to achieve this, but could be a bit messy. I'm sure there must be a simpler formula within Excel ... just don't know what it's called!
View 3 Replies View RelatedIs there any way to change a label in a user form based on the value of a cell?
I'm trying to link a series of labels to a small range of cells that change based on a data-validation drop box.
I've tried finding info, but I can't seem to find the right place.
The code I've tried so far without result is:
Code:
Private Sub Label3_Click()
Me.Label13.Caption = ActiveSheet.Range("BQ15")
End Sub
In my sheet called summary I have the names of the rest of the tabs in the book in cells B5 to B34. We want to be able to change the names of the tabs by changing their respective cell on the summary tab. So “sheet1” corresponds to B5, “sheet2” to B6, “sheet3” to B7, etc.. So if I change the name in B5 to say “APPLE” I want the tab for sheet1 to change to APPLE. When I change B10 from “sheet6” to “Lemon” I want sheet6 to be titled “Lemon”.
View 5 Replies View Relatedi'd like to use a macro to loop through a range of cells and change the interior color index based on the cell values (ex. if cell value < 10, set interior to blue, if cell value > 400, set to green) i'm trying a for each loop with an if statement but i keep getting syntax errors, i know this is probably a simple problem but i'm not experienced in vb,
View 4 Replies View RelatedI think looking at the attachment might make more sense, but here is a brief description of what I want to do. I am trying to change the colour of a cell based on looking up the value contained in that cell in a predefined list (which in my example I have called a legend). I need to do this in VBa but my VBA is not at all good.
View 4 Replies View Relatedto run a macro or any other methods to repeat the same head rows in my database as followings:
Let's say the main head row is in row 1.
Item names such as Item A; Item B; Item C ....in column A
What I want is to insert the same head row after the list of each item.
Item name (head row)
Book A
Book A
Book A
Item name (head row to be repeated)
Book B
Book B
Item name (head row to be repeated)
Book C
Book C
I have created a gradebook template so that I can keep track of my assignments as I get them and keep on top of my grades. Any way that I can code excel to work so that if my current average in the class ever drops below 70%, I want the color of the text to change to red to alert me that the grade is too low and needs to come up. I'm new to using VBA in excel and not sure how to do it or what to code.
View 8 Replies View RelatedI wish for a text box (drawn Text Box, from the "Shapes" tab) to conditionally change its background color based on whether a cell in a different sheet says "Online" - in which case it should be green, or "Offline" - in which case it should be red. So far, the code that I have that doesnt work at all, which I'm not even sure where to place (I tried in the Workbook - Open?), is the following:
[Code] .....
I also need to do this for a total of 9 Text Boxes, if that changes anything.
I am using Excel 2010 and trying to change/edit the color of the tabs in my workbook to turn green or red based on a y or n placed in a cell (the same cell on each tab). I have tried variations on several themes others have asked about as well for Excel 2007 and attempted to adapt them to fit my situation but none seem to work. Here's what I was starting with:
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Range("A1").Value
Case Is < 2.5
Sheet1.Tab.Color = vbRed
Case Is > 2. 5, Is < 4
Sheet1.Tab.Color = vbGreen
End Select
End Sub
The cell I'm using is F2 and my cell value is simply y or n. I realize the example above references numeric values and greater than/less than options, but I'm not sure how to correct this for my need.
i have had to change the quarters that our company works in and in doing so have to make some changes to my VBA code. our quarters have moved back 1 month so Q1 = Dec/Jan Feb now.
below is a copy of the code that used to make the associated cell font color red depending on the current date. i need to change it to be relevant to the new quarter structure.
[Code] .....
As you can see if the month value is less than 4 (jan/feb/march) it will highlight red....however i dont know how to change the range to specifiy the ranges 12,1,2 as per the new quarter structure.
I am trying to do is to write a code that will change the values of cells B17:B25 to "false" when the user selects "true" from the drop-down box in cell B16.
Here 's my
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "B16" Then
If Target.Value = "TRUE" Then
Range("B17:B25").FormulaR1C1 = "FALSE"
End If
End If
End Sub
This is not working! Nothing happens when I select "TRUE" in cell B16!
Private Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.AutoFilterMode = False
Range("d6:g6"). AutoFilter
Range("d6:g6").AutoFilter Field:=2, Criteria1:=Range("e1"), Operator:=xlAnd, _
Criteria2:=Range("e2")
I've attached the file also.
What i intend to do is that : (1) if i enter a value in E3, the filter should only apply using E3 value (currently its applying E3 value but if E4 is kept blank, it takes that as = " " ) . Unfortunately, i need to have the and condition, so i have to find a way in spite of this condition. Any way out ??
(2) If i enter values in A) E3 & F3 B) E3, F3, G3...then it ahould make multiple filtering possible. But when i try to apply such a condition, the same problem as in point (1) occurs, it takes the and empty criteria range as = " "
I have a work sheet with over 500 different name enteries. I need to change the cell color to red if the cell has the name "john" in it. The names are listed in a column (ex. A1:A500)
The cell could have the name "John Jackson", "John Johnson", "John A", or just "John". As long as the name "John" is found, the cell color should turn red.
If the cell has the name "Mike", "Mike A", "Mike Johnson" then change color to Green. Here I am looking for any cell that has the name Mike in it.
and so on ...
I have over 500 different names so Conditional formating won't help me here. I was wondering if I could do this with VBA coding.
I would like to copy rows based on the value of another cell.
For example turn this
code qty
apple 3
banana 4
orange 2
into this
apple
apple
apple
banana
banana
banana
banana
orange
orange