Excel 2010 :: Changing Tab Color Based On Cell Value?
Mar 6, 2014
I am using Excel 2010 and trying to change/edit the color of the tabs in my workbook to turn green or red based on a y or n placed in a cell (the same cell on each tab). I have tried variations on several themes others have asked about as well for Excel 2007 and attempted to adapt them to fit my situation but none seem to work. Here's what I was starting with:
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Range("A1").Value
Case Is < 2.5
Sheet1.Tab.Color = vbRed
Case Is > 2. 5, Is < 4
Sheet1.Tab.Color = vbGreen
End Select
End Sub
The cell I'm using is F2 and my cell value is simply y or n. I realize the example above references numeric values and greater than/less than options, but I'm not sure how to correct this for my need.
I would like to accomplish 2 things in my Excel 2010 spreadsheet by click a cell which already has a number and formatting in it.
1. How do I change the color of the cell, the color of the number in it, and the border around it. (Make it look like I just pressed a button by clicking it.)
2. At the same time have the text in different cell and the number in the selected cell appear in another different cell. (Text in a different cell = A , and the number in the selected cell = 23, the value in the resulting cell be "A 23") Everything I would like to happen at the same time by clicking the selected cell. I would also like this to be done several times by clicking different cells and not changing the previously selected cells.
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
Is there a way to create a macro to color code a cell based on the value in a cell, and then look up a value in a table, then color code it based on where it fits into the table?
I have a table of values for about 30 projects. In column g - there is a CPI value (see bold column)
Example: Project ID Name Program PMT SI ID AC Milestone TCP Level [Code] ......
Here is the table:
I have to color code a cell, base on the CPI and how it fits into the table below. So if the current Milestone is M2 or M3 and the CPI calculated is .14 the cell would be colored RED, if the CPI number is 2.01 for M2-M3 I would want cell to be colored Turquiose. If we were at Milestone M6 and the CPI was 2.01, it would be colored blue. If the CPI was .75 at Milestone M5, it would be colored Green
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
Based on the current month (which I planned on typing in) on the MainList worksheet I need to count how many blank cells are in the table above. The information above is on a separate worksheet but I can change that in the formula. Every month gets a new column.
This is what I have but its not working correctly: =SUMPRODUCT(--(BTES!AD1:BQ18=F2),--(BTES!AD1:BQ18" "))
Quick question, I know how to change a cells background / text color based on it's own value using conditional formatting but what would be the formula to change cell A1's background color based on the value of cell C1?
I think looking at the attachment might make more sense, but here is a brief description of what I want to do. I am trying to change the colour of a cell based on looking up the value contained in that cell in a predefined list (which in my example I have called a legend). I need to do this in VBa but my VBA is not at all good.
I have created a gradebook template so that I can keep track of my assignments as I get them and keep on top of my grades. Any way that I can code excel to work so that if my current average in the class ever drops below 70%, I want the color of the text to change to red to alert me that the grade is too low and needs to come up. I'm new to using VBA in excel and not sure how to do it or what to code.
i have had to change the quarters that our company works in and in doing so have to make some changes to my VBA code. our quarters have moved back 1 month so Q1 = Dec/Jan Feb now.
below is a copy of the code that used to make the associated cell font color red depending on the current date. i need to change it to be relevant to the new quarter structure.
[Code] .....
As you can see if the month value is less than 4 (jan/feb/march) it will highlight red....however i dont know how to change the range to specifiy the ranges 12,1,2 as per the new quarter structure.
I'm trying to create a simplified Gantt chart of sorts, and cannot figure out one piece of it. I'm not sure how to write out exactly what I need, but here goes.
I would like to have a formula that looks at the percent completed (which the user inputs) and multiplies it by the total duration for the task to give a total number of days completed. Then, under the corresponding dates, the color of the cell would change. I've attached a simplified version of what I'm talking about.
On the attached spreadsheet, the total duration (D2) is 5 days and the percent completed (C2) is 40%. This calculates to 2 days. With that said, I would like the cells under the first 2 days under the listed dates (E2 and F2) to change color. When the percentage complete reaches 60%, then G2 would change color, when it reaches 80%, then H2 would change, and when it reaches 100%, then I2 would change.
My guess is that the formula will need to result in a particular value, and then I'll use Conditional Formatting to do the actual changing of the cell color. Assuming this is correct, I still don't know what formula to use to accomplish this.
I am working on a workbook with 200+ sheets and an index linking to each of the sheets. On the sheets there is a cell containing the results of calculations and I need the cell referencing the sheet in the index to change background colors depending if the calculations value is greater or less than 0. I currently have working code that also changes the tab color of each sheet depending on the value, but i am trying to add the index cell background change functionality into that. also, the index listings is subject to change. my working code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range) If Range("d34").Value < 0 Then Me.Tab.ColorIndex = 3 ElseIf Range("D34").Value > 0 Then Me.Tab.ColorIndex = 4 Else
[Code]...
and the code i am trying to get working is
VB:
Private Sub Worksheet_Change(ByVal Target As Range) Dim rngX As Range Set myRange = Worksheets("Index").Range("A1:A500").Find(Range("C2").Text, lookat:=xlPart) ' the C2 is the reference the title that would be on the index If Range("d40").Value < 0 Then
[Code]....
I keep getting the runtime error '1004: application-defined error or object-defined error the thing is, i ran the cell background changing code in a normal macro before integrating it in my other worksheet code first and it worked fine. I have a little code experience, though not much in vba and I am unsure what the issue is. if there is another better way to accomplish what I'm tring to do, that would also be fine.
I did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
I wrote a macro to color the cell values in the rows based on their average value. For eg if the cell value is less than 0.2 Avg, they should be red color,if value is between 0.2 and 0.5 it should be yellow. This part is working fine
Now based on the color of the rows cells , need to write a macro for the header one. Logic is Coloum header should be in red colour, if in one or more number of rows cells are red. same with yellow ones. Could you please help me out in solving this with logic.
I have a spreadsheet that uses VB macros to calculate sums of cells based on the font color of the numbers inside. It used to be fairly easy going through each cell and "classifying" them by color, so that my macros can go ahead and sum the numbers in each respective color's cell... but now I have a huge amount of numbers and would like to automate the process somewhat. Here's an example using the A and B columns:
flight $400 hotel $150 hotel $130 meal $20 meal $15 flight $350
I tried using conditional formatting to automatically change the color of the adjacent cells based on the presence of a keyword such as "flight" or "hotel", but this change is only cosmetic, and doesn't actually change the font color (it is still the default black, hence why my color-summing macros won't work!).
I'm including a sample macro for what I use to color-sum my cells, but what I am looking to automate the color-coding process based on looking for keywords as explained above in my example. Here is one of the working color-summing macros (for red, in this case) if you'd like to use it as a reference:
Function SumRed(SelectedCells As Range) ' Adds the values of the cells where the font colour is red(3). Dim Cell As Object Dim x As Double
How, via VBA, would I add a comment from a userform (text box name: txtReason) into a cell that may already have a comment in it? I would like to keep the comment that is in the cell and then have the program add a "/" and the next comment from txtReason..
I have a work sheet with over 500 different name enteries. I need to change the cell color to red if the cell has the name "john" in it. The names are listed in a column (ex. A1:A500)
The cell could have the name "John Jackson", "John Johnson", "John A", or just "John". As long as the name "John" is found, the cell color should turn red.
If the cell has the name "Mike", "Mike A", "Mike Johnson" then change color to Green. Here I am looking for any cell that has the name Mike in it.
and so on ...
I have over 500 different names so Conditional formating won't help me here. I was wondering if I could do this with VBA coding.
I'm working in Excel 2010. I'm trying to create a dynamic range, using the OFFSET function. I've got it working beautifully but as soon as I save it and close the Name Manager the range stops working. When I go back into Name Manager I find all the cell references have changed (from C1:C600 to C1048572:C595 - or some other strange range).
P.S. What it's doing isn't so important as when the cell references are right it works. But just for full info: It's an OFFSET function, starting at A1. It will look at a list of companies and use a Match function to find out how many rows to offset (based on where the first instance of a particular company. And it uses the COUNTIF to make the range the same number of rows as there are entries for that company.
If input is entered into column C (range C2:C100), then row cells for columns D, E ,F, H or I must NOT be blank upon save. Could be that one or more of these row cells are left blank by mistake.
An error msg pops up upon attempting to save, stops the save and colors each cell yellow that needs info entered into.
I have a quarterly report that measures the safety performance of the plants in our company using bar charts. One set of 4 charts for the company as a whole and four additional sets of four for each of our divisions for a total of 20 charts.
I would like to change the color of the bars based on whether the location has met (bars colored green) or failed to meet (bars colored red) the goal for that criteria. The company average will be a yellow bar. Of course it can be done manually but that is really slow and tedious.
Is there a way, using VBA or a macro, to change the color of a bar (data point) based on the value of that data point? Can it run through all of the data points in each chart and make those changes based on criteria that I can set for each type of chart?
I want the order size to be colored red. If the most recent order is larger than the previous order, I want the order size to be colored blue. If the most recent order is the exact same size as the previous order, I want the order to be colored black.
How would I make code that would let me "remember" the previous order size and the most recent order size, and let me compare them to conditionally format the font?
I want the label in a chart to march the font color of the source cell
So in a chart I'd have 4 labels: "apple" "banana" "peach" "pear"
I can't see how to do it. When i select the albels it's "all or none". I can change ll the labels to a color. But, I want each individual label to be a diferent color.
is there a way to change the legend keys (aesthetically) in 2010?
I created a pie chart using a template but I don't want to keep the defualt legend keys. I tried changing the theme but it appears that the legend keys that come up are the same no matter what theme I change it to.
The Chart is a 3d Pie chart, I think that matters because the regular square legend keys show when the chart isn't 3D.
I have this code in a macro, the range will change as more data is added. so that I dont have to keep changing the range. How can I have this code autofill from the activecell to the last cell that has data in column M.
