i have made (found) a way to change the data in a cell by clicking on it, however i can only make it go from 1 to 0 or 0 to 1...heres the VB
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
On Error Resume Next
If (ActiveCell.Value = 1) Then
ActiveCell.Value = ""
Else:
If (ActiveCell.Value = "") Then
ActiveCell.Value = 1
End If
End If
End Sub
however, i would like the code to do a different task, i would like it to add one to the number everytime you click on it...i.e. it goes from 1 to 2 to 3 to 4 to 5 etc. everytime you click on it...
if it is possible, i would also like it to be restricted to a few cells, which i can determine afterwards and change
I would like to accomplish 2 things in my Excel 2010 spreadsheet by click a cell which already has a number and formatting in it.
1. How do I change the color of the cell, the color of the number in it, and the border around it. (Make it look like I just pressed a button by clicking it.)
2. At the same time have the text in different cell and the number in the selected cell appear in another different cell. (Text in a different cell = A , and the number in the selected cell = 23, the value in the resulting cell be "A 23") Everything I would like to happen at the same time by clicking the selected cell. I would also like this to be done several times by clicking different cells and not changing the previously selected cells.
I want to automatically put information from several cells into one cell, when these cells are clicked. Let's say that A1:J8 is the range were a cell can be clicked and if a cell is clicked in that range the value of these cells should be put in cell A9. If possible I want to avoid private subs in a worksheet. I preffer to have a macro running, so I can decide when to stop this routine.
In the worksheet "Batting and Pitching Register", I'd like to be able to sort the data in the two charts (APBA Batting Register and APBA Pitching Register) by simply clicking on the cells in the respective header rows.
I've set up ranges (Batting and Pitching), but have had no luck moving beyond that.
I have two buttons in my excel ("Fund Set up" & "Broker Set up") sheet1. so what i need is when i click the button named as "Fund set up" a input box should appear as "Enter the volume" and the user has to input the volume..For ex, user has entered the volume as 2. After that a line of data should be populated automatically from col A2 to col E2 as below.
Similarly if i click the "Broker set up" button the same action should happen but the activity should be populated as "Broker set up".
S.No Date Activity No.of Req Type of Action 1 21/01/2014 Fund set up 2 Input 2 21/01/2014 Broker set up 4 Input
So whenever i click any of this two buttons a input box should appear to get the volume and once the volume is entered by the user an entry should be populated as above in a new line.
Whenever she clicks on a cell, the cell to the right of it is also selected. When she tries using tab to move to a new cell, she can only move between the two selected cells. Same with using the enter key. As such, it is extremely difficult for her to modify only one cell, since she always has two selected.
The F8 key, as well as Ctrl+F8. However, pressing the F8 key only adds more cells to the autoselection, and Ctrl+F8 allows her to select one cell, but also highlights the cells around it, and when we tried to select other cells, every cell we clicked stayed highlighted.
Additionally, sometimes when she clicks a cell, it will just select that one cell. Click it again, and the problem is back. I haven't been able to determine any patterns to this behavior, and I know there is no problem with the input (the keyboard and mouse are standard-issue in our lab, and we keep them well maintained).
I would like to run a macro by clicking a cell. I don't want a toolbar button/menu item and Hyperlinks don't work. Can this be done?
More info: My macro selects the current row in Sheet A and moves it (cut & Paste) to Sheet B in the workbook. The macro then goes back to Sheet A and deletes the now blank row.
I have master data in sheet1 with 4 headings (EmpNo.; Name; Grade; Status) and i put a push button beside it. what i want to happen is that, if i push the button, all data with a value of "Inactive" in sheet1 will be COPIED to sheet2 with the heading but only the EmpNo and Name will be transfered to sheet2.
I was copying cells from one spreadsheet to another using the following IF statement. It basically says that if the cell in this spreadsheet is blank, then put nothing in there. If it is not blank, put in data from another spreadsheet. The problem is that when it copied the information over, it was in a completely different color than the original cell. So, for example, if I put the following formula in the new spreadsheet, it will copy the cell information from the listed spreadsheet in this formula and place it in the appropriate cell, but it is changing the data from its original color to green.
=IF($I2="","",'[Reinstatement Template--KGM.xls]Car Care Non CA'!L1)
I'm trying to do. I have 2 columns, both have empty cells with borders. I would like to make it so that when the user clicks one of the cells, it turns grey and the one beside it turns white. I set up two macros as follows:
I have created a macro that autofilter values in sheet 2.
In sheet1 I have a cocpit of values from Sheet 2, 3, 4 and 5.
In the monitoring cells in Sheet1 I would like to doubleclick (or similar) in the cell where I have a value from ex sheet 2, and then trigger the macro which does the autofiltering.
I have created a userform, (my first one)-very simple form, i have created a massive textbox, so when i doubleclick a cell in Sheet 1, userform pops up and I can write comments.
I am not sure how to write a code for this? I know it will have Private Sub Doubleclick, not sure on the rest?
I have programmed a Form in VBA that initializes by clicking a button on a worksheet. The Form features combo boxes, text fields, and a couple option buttons. Once completed, the Form enters the values entered by the user (as strings) in contiguous colums in a single row. The worksheet is locked so as to not allow users to input values into the worksheet directly and bypass the Form.
The question: Once a row is filled by submitting the Form, i want to allow a click event on that cell (like double-clicking, for example) to pop-up the Form, but containing the corresponding values from the cells in the matching combo boxes, text fields, option buttons. I want to do this so that I can allow modification on a row without letting the worksheet be modifyable without passing through the Form. Here's the code for submitting the Form values into the worksheet:
Private Sub cmdSubmit_Click() ActiveWorkbook.Sheets("ALTEC Growth Report").Activate Range("A7").Select Do If IsEmpty(ActiveCell) = False Then ActiveCell.Offset(1, 0).Select End If Loop Until IsEmpty(ActiveCell) = True ActiveCell.Value = Trim$(txtName.Value) ActiveCell.Offset(0, 1) = cboCC.Value ActiveCell.Offset(0, 2) = cboProdServ.Value ActiveCell.Offset(0, 3) = cboStatus.Value ..................
I want to display a comment/note that is always visible however:
*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet; *I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells *I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet *I do want that the user can position this comment on his screen where he wants it to be.
In excel, I have created a table containing macro pull-down menus and text boxes.
The question I have is this:
In the properties table for my pull-down menu, I have the “ListFillRange” filled with the correct range of cells containing the data that I wanted stored in it.
The problem/solution I am having/wanting is to have not just one selection present, but many (to show up in the text box directly below it) since there will be some data that have many sub-data that need to be visible for the person who will be testing whatever…
All in all, I would like to know if there is a code that I can write in the Visual Basic window or the macro “view code” window that will allow the text box below to be filled with the information that is clicked on from its corresponding pull-down menu. Is this possible?
I understand the specification of a Function procedure does not provide for it to change the contents of cells. However, I have the need/preference to be able to change cell data by using a custom function (instead of a Sub) because of its ease of use and execution of multiple what-if scenarios - displayed jointly.
Is there a way around this specification/limitation - any way? Are there different techniques (standard or non-standard) to achieve thisr goal?
I have two pieces of code. The first one puts a tick mark in the cell when you double click it. The second one hides column B of another sheet if the value in cell A1 of Sheet1 is "a". I want to combine these two codes so that when I double click cell A1 of sheet1 it puts a tick mark in the cell and hides column B of Sheet2 and clears the contents of range B2:B50 of Sheet2.
I have one issue with my protected worksheet. Some locked cell contents are linked to cell contents located in another sheet. When I double clicked on these cells, a warning window poped up but also opened the sheet in which the corresponding cell is located. This is quite annoying to have to go back to the former sheet. How can I prevent it ?
However it will not update until I physically click on any cell within the U33 to U38 range.
How do I tell Excel that I physically clicked on any of these cells? I have tried Activate..., blank and re-populate, select cell, select range... In VBA it does not think it is being clicked on.. it is just doing the code... when done I have to again manually/physically click on it.
I have created a workbook of 12 monthly worksheets, with an index page with hyperlinks to each worksheet. There is also a hyperlink on each worksheet to return to index page. Each worksheet is protected, but the cells which users can enter information are not locked. The protected worksheets have the 'select locked cells' unticked.
I have found that an inadvertant click on any of the protected cells in the worksheet will take users back to the index page. This is very annoying, what have I done wrong? The hyperlink is one of the unlocked cells.
I have a problem on auto-sorting my data after clicking the "x" or "Close" button on DataForm. Im creating a command button that trigger a macro to open an autofill DataForm. I want a code that everytime i ADD or EDIT using the DataForm, it will automatically sort the Column A after clicking the "x" or "Close" button. Below is the code of my macro:
Code: Sub OpenForm() Sheets("DATA").Select ActiveSheet.ShowDataForm End Sub
I am trying to chart data from a single cell that is changing over time. The cell is linked to another software program that provides its value. I would like to be able to chart the changes in its value either every time it changes or on some time interval (i.e. every 3 minutes).
