Removing Or Changing Data In A Cell By Inputting Date In Another Cell
Aug 4, 2014cell a1 has yes cell b1 has yes and i want to type yes in c1 that will change a1 and b1 automatically to a blank cell
View 3 Replies
ADVERTISEMENT
Automatically Changing Color Of Cell Within Half An Hour Of Inputting
Jan 9, 2013I want to create a macro or formula for changing the colour of the cell after half an hour of inputting.
View 3 Replies View RelatedGo Immediately To A Particular Cell After Inputting Data In Another Cell And Hitting Enter Options
Feb 20, 2010I'm inputting data in E3 and after I hit enter I want B2 to be
selected. But only for E3 and only in one worksheet. And possibly a
further step... Sometimes the formula in B2 has picked up data from
another place depending on what value was entered in E3. If it's done
this then I won't need to go to B2, I'd want to go to A8 after E3
instead of B2.
Macro: Changing Cell Color Based On Date In Cell
Jan 12, 2009I did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
Removing The 00/01/1900 Date When Looking Up Another Cell In Another Worksheet
Apr 12, 2009I am trying to reference a cell on another worksheet, the cell is formatted to be a date. when i put in the following formula =Sheet2!A1 and i don't input a date into A1 on sheet 2 the cell containing the formula shows the date 00/01/1900, is there any way of stopping this showing, ideally the cell would be blank until I inputted a date into A1 on sheet 2
Stamp Cell With Today Date Without The Date Changing Tomorrow?
Feb 7, 2013If a1,a21,a41 have a value greater than 0, I wish to stamp cell b1,b21,b41 and so on with todays date, but without the stamped value changing/advancing tomorrow. At the moment cells b1,b21,b41 are copied down as follows. =if(a1>0,TODAY(),"") This works fine, but the date stamp of course changes tomorrow. I can not apply code to the whole b column as cells b2:b20, b22:40 etc have other non-date format data to which the code does not need to apply - the todays date value cell occurs every 20 cells.
View 6 Replies View RelatedInputting Dependant On Cell
Oct 12, 2008on sheet1 which is called working sheet and cell d25 is asking what type of goods been sold
i have several different sorts"
ie
s25
s28
s50
s69
s70
s82
abd
t70
t140
i want the spreadsheet to look up somewhere on a sheet called delivery all the components that could be used for that type
so i guess i need to name define?
ie if s25 is selected
on delivery sheet in a20 it would then list all the components underneath each other.
Inputting Information To Appear In Another Cell?
Feb 4, 2012How to input information into one cell and it appears in another cell based on specific information inputted.
View 3 Replies View RelatedInputting Sequential Numbers From One Cell
Nov 28, 2008I am trying to make excel list in a column like 1,2,3,4,5. this is dependant on a value i place in one cell eg 5
i want excel to then place 1,2,3,4,5 in seperate cells down a column. does this make sense.
then the calculations will only appear the the numbered cells.
Changing Color Of Cell By Date
Mar 2, 2009I am trying to make a reference to tell me when my rigging gear is due for inspection. I want the cell to change colors when a date is in range. For example i would like a red cell when the item is due or past due for inspection. A yellow cell for when the item is 90 days out from the due date. i have used conditional formating and used =E$-30<=TODAY() and changed cell to red. but when i add another format, for E$-90<=TODAY() for yellow, it will not work.
Once this is solved, i will need to make the entire row change color.
MAX Date - Cell Reference Not Changing For Each Row
Aug 10, 2013I'm using the following formula which is entered by using VBA on the worksheet change event but the cell reference 'A2' is not changing for each row, i.e. A3, A4 etc.....
Code:
=MAX(IF( 'Device Use - 4 month Period'!$A$2:$A$20000=A2, 'Device Use - 4 month Period'!$C$2:$C$20000))
Changing Cell Colour Due To Date
Feb 5, 2008I m a newbie at Excel but i have a little work project on my hands which i would like to have an excel document have cells change colour to the date
eg:
Today is 05/02/08 cells with the attached date of this should be orange
Above this date should be green (e.g 10/02/08)
and below this date should be red (e.g 01/01/07)
Also after this problem is solved, the dates that turn orange is it possible to automatically have some sort of message come up saying that "Such as such is expiring" or for the red "Such and such is expired" and would the program/document need to be open for the messages to occur?
Changing Color Of Cell By Date
Dec 29, 2008what I want can be done in the 'Conditional Formatting' but I can't seem to figure it out.
I have a spreadsheet with specific dates down the left colum and I need that row to highlight when the date comes, and then return back to normal when the next date comes around and gets highlighted.
so for example, A1 = 1/1/2008 I need that row highlighted when 1/1/2008 comes around, then the next date would be A2 = 1/15/2008 and so on..
Changing Value Of Duplicate Cell Depending On Date
Jan 15, 2014I inherited a worksheet with 70k+ rows of data. As shown below each row contains a record number(Col A) with the date(Col B) it was created and value(Col C). There are 5 records per day. You can see in the example below that Col A has the value 30 duplicated for each day. Is it possible to rename only the second "30" in Col A for each day?
Col A
Col B
Col C
10
1/14/2014
10
[Code] .........
Changing The Year In Date Range From Another Cell
Feb 22, 2007I am trying to change the year of a date range I search from.
I have a selection of dates, I use sumproduct on a seperate page to calculate the number of entries between two dates entered in seperate cells
=SUMPRODUCT((HFRA!B4:B2000>=Summary!B1)*(HFRA!B4:B2000<=Summary!B2))
Cell B1 conatins the date 01/01/2007, and cell B2 contains the date 31/01/2007. I repeat this for every month of the year.
I want to be able to change the year of these dates in B1 and B2 from a seperate cell on another page.. so I can change the search ranges to 2008 without going into each cell and changing it manually.
Avoiding User From Inputting Duplicate Entry Into Single Cell In Excel
Dec 3, 2013I have a worksheet in which i am asking a user to enter manually a number in cell E3. Suppose the user starts with 100, then the next time he is entering in E3 he shoudnt be able to enter 100 nor any number less than 100. I dont have a range for the numbers that the user is going to enter.Therefore countif function does not work. Is there any way that i an store the number taht the user enters first in cell E3 and then use that database to avoid the user from entering the same or a number lesser than that number.????
View 2 Replies View RelatedChanging Font Color Based On Date Value In Another Cell
Mar 7, 2014i have had to change the quarters that our company works in and in doing so have to make some changes to my VBA code. our quarters have moved back 1 month so Q1 = Dec/Jan Feb now.
below is a copy of the code that used to make the associated cell font color red depending on the current date. i need to change it to be relevant to the new quarter structure.
[Code] .....
As you can see if the month value is less than 4 (jan/feb/march) it will highlight red....however i dont know how to change the range to specifiy the ranges 12,1,2 as per the new quarter structure.
Display The Day By Inputting The Date?
Feb 20, 2007for example.
I type "20 Feb 07", and excel formatting auto changes that to "Tuesday 20 Feb 07"
I actualy need this for a more complex formula...
if A1= any date from monday to sunday of one week, then A2= mondays date+21
the only way i can comprehend this is to make a formula that says if A1= a monday A2=date+21, A1= a tuesday A2=date+20, etc.
Auto Send Email Based On Changing Date In Cell
Nov 20, 2008I need to send an email reminder to teachers on the day they have duty. I know how to set up an email that sends on a certain date, but I am unsure how to code it when the date changes. I have attached the spreadsheet.
In cell A 53, I have the date November 24th. In cell C53, I have the email address of the teacher doing duty that day. In cell F53, I have the date November 25th. In cell, I53 I have the email address of the teacher performing duty that day. On November 24th, the person in C53 should receive a reminder email. On November 25th, the person in cell I53 should receive a reminder email. I will have spreadsheet for every month of the year. So there will be LOTS of changing dates. How do I code this when the date keeps changing?
Add A Date Time Stamp In A Cell After Data Is Entered In A Different Cell And Date
Apr 18, 2014I am working on an Inventory Spreadsheet. I have need it to date time stamp that willpopulate a different cell /field when text are entered in a different cell/field and will not change all the previous dates entered on the spreadsheetevery time I re-open the spreadsheet. I formula I am using is =IF(E3<>"",IF(D15="",NOW(),D15),"")and it changes each time I open thesheet to do the inventory so I do not know the date of the last inventory. Iwant to capture the actual date that the inventory was completed in thesecond/different cell?
View 9 Replies View RelatedCreate A Chart By Inputting A Date Range?
Dec 5, 2008I have a worksheet with 500 rows. Coulmn A is all the dates of the items. Is it possible to somehow havea userform or something that I input a start date and a finish date and it only shows me that info.?
View 2 Replies View RelatedCalculator Compute Automatically After Inputting The Date
Apr 29, 2009i m making a very small calculator. It's a little hard to describe, but I need to look like the following
Let's say the individual got here on 1 Jan
Phase 1 is for days 1-14 last for 14 days
Phase 2 is for Day 15-35 last for 21 days
Phase 3 is day 36+
This is what I need it to look like: All the phase information will compute automatically after inputting the date arrived. In addition I would also like to be able to change one of the phase dates and the remainder of the phases compensate according to the newly entered date.
Date Arrived = 01 Jan 09
Phase 1 = 01jan09
Phase 2 = 04Feb09
Phase 3 = 05 Feb09
Changing Data In Same Cell In All Sheets
Jan 28, 2014I was looking for some code that I could change the data in cell E5 to "Bom RevD" on all sheets in my workbook.
View 2 Replies View RelatedChanging Cell Data By Just Clicking On It.
Apr 6, 2007i have made (found) a way to change the data in a cell by clicking on it, however i can only make it go from 1 to 0 or 0 to 1...heres the VB
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
On Error Resume Next
If (ActiveCell.Value = 1) Then
ActiveCell.Value = ""
Else:
If (ActiveCell.Value = "") Then
ActiveCell.Value = 1
End If
End If
End Sub
however, i would like the code to do a different task, i would like it to add one to the number everytime you click on it...i.e. it goes from 1 to 2 to 3 to 4 to 5 etc. everytime you click on it...
if it is possible, i would also like it to be restricted to a few cells, which i can determine afterwards and change
Cell Changing Color With Different Data
Aug 19, 2008I was copying cells from one spreadsheet to another using the following IF statement. It basically says that if the cell in this spreadsheet is blank, then put nothing in there. If it is not blank, put in data from another spreadsheet. The problem is that when it copied the information over, it was in a completely different color than the original cell. So, for example, if I put the following formula in the new spreadsheet, it will copy the cell information from the listed spreadsheet in this formula and place it in the appropriate cell, but it is changing the data from its original color to green.
=IF($I2="","",'[Reinstatement Template--KGM.xls]Car Care Non CA'!L1)
Changing Cell Data By Custom Function
Aug 5, 2008I understand the specification of a Function procedure does not provide for it to change the contents of cells. However, I have the need/preference to be able to change cell data by using a custom function (instead of a Sub) because of its ease of use and execution of multiple what-if scenarios - displayed jointly.
Is there a way around this specification/limitation - any way? Are there different techniques (standard or non-standard) to achieve thisr goal?
Chart Data From A Changing Linked Cell Over Time
Nov 7, 2008I am trying to chart data from a single cell that is changing over time. The cell is linked to another software program that provides its value. I would like to be able to chart the changes in its value either every time it changes or on some time interval (i.e. every 3 minutes).
View 9 Replies View RelatedExcel 2010 :: VBA To Start Macro When Changing Data In A Cell
Jul 21, 2014When a change is made in cell L11, cell N11 should be locked automatically for typing. This is true for the cells between L11:L25, and cells N11:N25.
I have been trying to come up with a code that will:
1 - start my macro when f.ex. L11 is > 0
2 - lock N11 when L11 is filled out
3 - unlock N11 when the input in L11 is deleted
This is my attempt so far to put together a code:
[Code] .....
I'm using Excel 2010.
Input And Display Data In Cell In H:mm Format Without Changing To Time
Feb 25, 2010Can i put into the cells B38-AF38, that would display the sum of B20:AF20 + B24:AF24 + B28:AF28 + B32:AF32 +B36:AF36 in a h:mm format.
When imputing the data into a cell in a h:mm format, I need it to display in that cell and formula bar the h:mm format without having to put an apostrophe in front of "h" or ":mm" value. Once complete, this form is going to go to other trainers to use on their computers and I dont think they would remember to keep putting an apostrophe before the data.
Example:
B20= 1:15 (1h15m) NOT 1:15:00 AM
B24= :30 (30min)
B28= :45 (45min)
B32= 1:45 (1h45m) NOT 1:45:00 AM
B38= 4:15 (4h15min)
I have attached a copy of the form for better clarification.
It doesnt seem to be complicated, but it's certainly a lot more than I thought.
Inputting & Collecting Data
Dec 17, 2009I've just been asked to do a new Quality Control project for my boss. What I'm looking to do is be able to input the thickness values of our product in one worksheet, and have it recorded in another, as well as have the data separated by the model number
The main problem I'm having is figuring out how to enter data in the 1 worksheet as a template, and have the data consecutively stored, one after the other
Are there any functions that will allow me to do this?
