Add Active Cell Data To Cell By Clicking
I want to automatically put information from several cells into one cell, when these cells are clicked. Let's say that A1:J8 is the range were a cell can be clicked and if a cell is clicked in that range the value of these cells should be put in cell A9. If possible I want to avoid private subs in a worksheet. I preffer to have a macro running, so I can decide when to stop this routine.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Identify Active Cell And Use The Column To Add Formula To Another Cell
I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted. I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank. What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added. In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
View Replies!
View Related
Changing Cell Data By Just Clicking On It.
i have made (found) a way to change the data in a cell by clicking on it, however i can only make it go from 1 to 0 or 0 to 1...heres the VB Private Sub Worksheet_SelectionChange(ByVal Target As Range) On Error Resume Next If (ActiveCell.Value = 1) Then ActiveCell.Value = "" Else: If (ActiveCell.Value = "") Then ActiveCell.Value = 1 End If End If End Sub however, i would like the code to do a different task, i would like it to add one to the number everytime you click on it...i.e. it goes from 1 to 2 to 3 to 4 to 5 etc. everytime you click on it... if it is possible, i would also like it to be restricted to a few cells, which i can determine afterwards and change
View Replies!
View Related
Copy Data From Cell In One Worksheet, Add Text, And Paste To Cell In Another Sheet
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'. Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View Replies!
View Related
Increment Cell By 1 By Clicking Another Cell
I would like to click on "B1" (making this a button) and have it add "1" to blocks "B9" and "C9". Both blocks would start out with "0". I would need it to add in sequential order everytime I clicked on "B1". Basically, when I open my document the very first time, "B9" and "C9" will read "0". When I click on "B1", they should then read "1". Then next time I click "B1", they should read "2", and so forth.
View Replies!
View Related
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet) what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14. if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
View Replies!
View Related
Run A Macro By Clicking A Cell
I would like to run a macro by clicking a cell. I don't want a toolbar button/menu item and Hyperlinks don't work. Can this be done? More info: My macro selects the current row in Sheet A and moves it (cut & Paste) to Sheet B in the workbook. The macro then goes back to Sheet A and deletes the now blank row.
View Replies!
View Related
Start Macro From Clicking In Cell
I have created a macro that autofilter values in sheet 2. In sheet1 I have a cocpit of values from Sheet 2, 3, 4 and 5. In the monitoring cells in Sheet1 I would like to doubleclick (or similar) in the cell where I have a value from ex sheet 2, and then trigger the macro which does the autofiltering.
View Replies!
View Related
How To Get A Userform By Double Clicking A Cell
how to get a userform by double clicking a cell. I have created a userform, (my first one)-very simple form, i have created a massive textbox, so when i doubleclick a cell in Sheet 1, userform pops up and I can write comments. I am not sure how to write a code for this? I know it will have Private Sub Doubleclick, not sure on the rest?
View Replies!
View Related
Display Message By Clicking Cell
I want to display a comment/note that is always visible however: *The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet; *I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells *I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet *I do want that the user can position this comment on his screen where he wants it to be.
View Replies!
View Related
WorkSheet SelectionChange Clicking On A Cell To Update
I have code in my Worksheet_SelectionChange. However it will not update until I physically click on any cell within the U33 to U38 range. How do I tell Excel that I physically clicked on any of these cells? I have tried Activate..., blank and re-populate, select cell, select range... In VBA it does not think it is being clicked on.. it is just doing the code... when done I have to again manually/physically click on it.
View Replies!
View Related
Run Code When Clicking Locked Cell
I have programmed a Form in VBA that initializes by clicking a button on a worksheet. The Form features combo boxes, text fields, and a couple option buttons. Once completed, the Form enters the values entered by the user (as strings) in contiguous colums in a single row. The worksheet is locked so as to not allow users to input values into the worksheet directly and bypass the Form. The question: Once a row is filled by submitting the Form, i want to allow a click event on that cell (like double-clicking, for example) to pop-up the Form, but containing the corresponding values from the cells in the matching combo boxes, text fields, option buttons. I want to do this so that I can allow modification on a row without letting the worksheet be modifyable without passing through the Form. Here's the code for submitting the Form values into the worksheet: Private Sub cmdSubmit_Click() ActiveWorkbook.Sheets("ALTEC Growth Report").Activate Range("A7").Select Do If IsEmpty(ActiveCell) = False Then ActiveCell.Offset(1, 0).Select End If Loop Until IsEmpty(ActiveCell) = True ActiveCell.Value = Trim$(txtName.Value) ActiveCell.Offset(0, 1) = cboCC.Value ActiveCell.Offset(0, 2) = cboProdServ.Value ActiveCell.Offset(0, 3) = cboStatus.Value ..................
View Replies!
View Related
Clicking Locked Cell Activates Hyperlink
I have created a workbook of 12 monthly worksheets, with an index page with hyperlinks to each worksheet. There is also a hyperlink on each worksheet to return to index page. Each worksheet is protected, but the cells which users can enter information are not locked. The protected worksheets have the 'select locked cells' unticked. I have found that an inadvertant click on any of the protected cells in the worksheet will take users back to the index page. This is very annoying, what have I done wrong? The hyperlink is one of the unlocked cells.
View Replies!
View Related
Combine Two Macros And Run Them On Double Clicking A Cell
I have two pieces of code. The first one puts a tick mark in the cell when you double click it. The second one hides column B of another sheet if the value in cell A1 of Sheet1 is "a". I want to combine these two codes so that when I double click cell A1 of sheet1 it puts a tick mark in the cell and hides column B of Sheet2 and clears the contents of range B2:B50 of Sheet2.
View Replies!
View Related
Return Maximum Of Active Cell & Arbitrary Value To Cell
I am looking for VBA that will add the value of the current active cell on the sheet to the value in cell F12. The maximum value of F12 cannot exceed 1000. So if the value in F12 = 950 and 100 is the value in the active cell the maximum value in F12 should show 1000, not 1050. It should do this on the click of a button.
View Replies!
View Related
Go To First Cell In List That Matches Contents Of Active Cell
I am just learning to use VBA and this may be the most simple task ever, but I can't figure it out. I've searched for all of the keywords I can think of, but can't find a solution... I have a list of names in a sheet. Other columns in this sheet contain data like amount charged, amount paid, etc. This sheet must be manually updated (because the other program won't export the information I need) periodically to ensure proper billing/payment application in the original software (all transactions are handled by other people that I don't trust). I sort the list so that the all names that are the same (ie John Doe) are together. A short example list looks like this: Jeremy Apple John Doe John Doe John Doe Jimmy Kravitz Jimmy Kravitz In updating my sheet, I set up a macro that will input todays date in one of the columns for all occurences of that name (so, every row that contains John Doe in column B, column V will have todays date in it). Currently, in order for my macro to work properly, I have to manually make the activecell the first occurrence of 'John Doe'. When I'm ready to update 'Jimmy Kravitz', I have to select the first occurrence of 'Jimmy Kravitz' and so on. Here's my question - Is there a way to use a VBA macro to find the first occurrence of 'John Doe' (and automatically 'know' which name I am updating)? Basically, I need a macro that will take the information that is in the cell in column B in the active row, find the first row that has that same name, and make that cell (column B) the active cell...
View Replies!
View Related
Number Add To Comma Separated Data In Cell
Cell(i,1)have 3 Numbers Each Number Not Allowed Greater Than 10 Each Number In Cell(i,1) Will Be Added 1 In Cell(i,3) And Cell(i+1,3).... How Can I Seperate Numbers And Make Three Variables To Run Macro A 1,3,10 2,5,9 C 2,3,10 1,4,10 3,5,9 2,6,9 2,5,10
View Replies!
View Related
Find Blank Cell In Column To Add Data
I need to write entries into an open spreadsheet with data input on a userform. i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
View Replies!
View Related
Add New Data To Existing Cell Based On Multiple Selective Inputs?
I have a spreadsheet of courses required to reach a certification. On this spreadsheet I have listed the number of hours required for each course in one column, and how many hours I have accrued in an adjoining column. Not all the hours will occur at once, so I tend to bound from cell to cell adding hours in small amounts. What I am trying to do is create a macro that will allow me to add to the existing number of hours to the newly accrued hours, without typing over what is already there. For example…Class 1 requires five hours total, and I have two hours accrued. If I accrue two more hours (for a total of four hours) I want to update cell E2 without going in to this cell manually and changing this number. I would like to enter the additional two hours in a text box or similar function, and have that function update E2. To add to the level of difficulty, there are four levels of class. This means not only do I need to be able to select which class hours need updated, but which level of class. I have attached the spreadsheet I am working with to try to make things a little clearer.
View Replies!
View Related
Name A Active Cell Which Ever Cell Is Activecell
I need to name a cell that is the active cell. The active cell can be any cell that is selected at the time I need to name it. I can get it to name the cell using the cell address, but I don't know how to change it to the active cell. Below is the code that I tried, but the syntax that I tried to say what cell is to be named simply isn't correct.
View Replies!
View Related
Get Value Of Cell Adjacent To Active Cell
I'm trying to compare two lists of foods, one input by a user (together with number of servings consumed), the other a list of foods with their calorie content. Then I'm trying to get the number of servings associated with the user's input (in a cell adjacent to the one I'm in for the comparison/search), and get the calorie content of that food from the list (also in an adjacent cell), so I can multiply the two to get total calories consumed. However, I'm getting, variously, "Wrong number of args," "Type mismatch," "Application/Object-defined error," and so on. The code below shows what I've tried, and I think I'm doing something braindead basic wrong, but I can't find what my error is. Everything works in the snippet (that is, I've correctly Dimmed the variables, I get my food match, and the row indexes keep up correctly), except the attempt to write, for instance, the number of servings to the variable 'o'. That cell ref fails. m = 7 'initializes the row index of Daily Data block of the Inputs sheet for the food items n = 2 'initializes the row index of the Data sheet for the food items r = 0 'initializes value total carorie content of food item across number of times eaten in a day For Each Food In FoodName 'the User-input food For Each datum In DataList 'table containing food's calorie content If Food.Value = datum.Value Then
View Replies!
View Related
Entering An "x" By Just Clicking The Cell
I would like to be able to click on the individual cells of a particular column in a spreadsheet and by doing so Excel will automatically enter an "x" into that cell. The bigger picture is that users can search a spreadsheet for email addresses, an advanced filter posts the results to a separate sheet from which users can configure a group email by clicking an "x" next to the email addresses they want included. Essentially, it's kind of mimicking checkboxes.
View Replies!
View Related
Format Cell To Add Text To Begining Of Cell ()
I have a column with product codes. each code starts with "11P - " and is followed by a 6 digit number. Is there a way that I can format the cell so that have this automaticlly added when I type in the rest of the code. For example if I type "123456" the cell would display "11P - 123456" I imagine that it is a matter of setting up a custom # format, but I have no clue how to do that.
View Replies!
View Related
If Cell Contains Chosen Text, Add Value From Another Cell In Same Row
I have a sheet with 65,000 rows. Column c contains text and numbers (phrases from search engine results seraches). Column G contains the number of times the phrase was searched. I am wanting to run a formula / macro which goes like; If cell in column c contains variable then copy cell g out of same row to cell h. This way I can quickly sum up column h to see total number searches by variable. I have looked through forum for past half hour and could not find what i needed.
View Replies!
View Related
BORDER Around Active Cell
I have a spreadsheet with DDE formulas in the cells. When the contents of any cell changes I want to DRAW A BORDER (NOT CHANGE THE BACKGROUND COLOR !!) AROUND THE CELL .. When another cell's value is updated I want to REMOVE the border which was around the"OLD" cell and now place a border around the most recently changed cell, etc. Only the newest active cell should have a border around it !!!
View Replies!
View Related
Active Time In A Cell
is there any way to have a running clock or time in a cell like when you open up a sheet you see it click-by second by second I would like this, so when i print the sheet it shows exactly what time it was when printed
View Replies!
View Related
Active Cell And Offset
ThisWorkbook.Sheets(2).Cells(nrow + 1 + j, 2 + high_count).Formula = "=VAR(" & ActiveCell.Offset(0, n_high_count -1) & "," & ActiveCell.Offset(0, -1) & ")" *n_high_count is the negative of high_count I want "ThisWorkbook.Sheets(2).Cells(nrow + 1 + j, 2 + high_count)" to have the formula "=VAR(XX:XX)" where the range is the current row second column to the current row current column -1.
View Replies!
View Related
Copy Active Cell
I have two worksheets with the same column. Would like to edit ex. sheet1 A1 and that sheet2 A1 updates automatically by copying just the value, not the reference.
View Replies!
View Related
Reference Active Cell
I've got 3 columns say A,B,C. Column C (row1) = Column A (row1) * Column B (row1). I'm trying to apply this formula to all the cells in Column C. I've tried typing the following formula in all of column C. =OFFSET(ActiveCell,0,-1) * OFFSET(ActiveCell,0,-2) Obviously the ActiveCell reference doesn't work. This would be simple in VBA but here on excel how would I reference to the cell itself where the formula is contained?
View Replies!
View Related
VB - Paste In Last Active Cell
I'm working on this Macro process - and I can't figure two things out. 1) How do I get it to past contents in the second blank cell at the bottom of a list in a specific column? IE - data in B1:B17, paste new list in B19. What I'd REALLY like, is for it to paste in B8, but if B8 used, THEN paste to the second to last blank cell in column B. (if thats even possible) 2) I have VB open an excel workbook, grab data, copy and then past into 1) (above), but then close that workbook. However it always asks "do you wish to save?" and "Do you wish to keep data on clipboard" How can I program it to say "no" for both of these windows prompts? Here's an excerpt of my code:
View Replies!
View Related
Finding The Active Cell
how to simply find out what the active cell is (This would be the cell the curser is currently in). It is already displayed in the Name Box on the menu in Excel, but I can't find a way to access this data automatically.
View Replies!
View Related
Use Value Of Active Cell To Name Row
I'm trying to take the value of a cell and use the value as a name for the row. If cell a1 has value = June. I want to change the name of row 1 to June. I'm not sure what I'm doing wrong with the following code. Sub Name_a_row() ' ' Dim TheName As String Dim RowNum As Integer TheName = ActiveCell.Value RowNum = ActiveCell.Row ActiveWorkbook.Names.Add Name:="TheName", RefersToR1C1:="=Data!R&RowNum"
View Replies!
View Related
Pasting To Last Active Cell
I'm trying to paste columns to the last active cell on another sheet and I'm doing something wrong. Sub WPRFilterMacro() ' ' WPRFilterMacro Macro ' Filter and copy and paste WPR information into WPR sheet ' Sheets("Data Sheet").Select Range("A1").Select Selection.AutoFilter Selection.AutoFilter Field:=1, Criteria1:="Work Place Resources" Range("B2").Select Range(Selection, Selection.End(xlDown)).Select Selection.Copy Sheets("Cisco(WPR)").Select 'This takes command activates cell G7 after being on D5, don't know why ActiveCell.Offset(1, 0).Range("D2").Select ActiveSheet.Paste I'm trying to paste this column to the first non-active cell in column D, but the code is taking it down two rows and two columns down, depending on where the active cell starts. I would just start it on a certain cell, but eventually, there will be different starting points.
View Replies!
View Related
Active Cell As Reference
I would like to fill data in table on another worksheet, lets call it Sheet2 that starts with the activecell from Sheet1 and then use offsets. The activecell changes, but the remaining offsets for rows and cells always remain the same. I am pretty sure , I can figure it out this out using VBA, but is there a formula way to do this? Either looking at the activecell from Sheet1 as a start or using formatting like bold the start cell?
View Replies!
View Related
Change Active Cell Color According To Name Above
Here is a screen shot of what I have: I want to be able to enter the name from the above 4 cells (B3,B4,B5,B6) IN THAT COLUMN, and have the active cell change color accordingly. If I am in cell C7 and start to type "PUBLIX" It should turn red in color. It does not because the code looks to a specific cell (example: B3). What can I change in my code to give the results I desire? I have conditional formatting code below I copied from THIS site: Private Sub Worksheet_Change(ByVal Target As Range) ' Multiple Conditional Format Dim rng As Range ' Only look at single cell changes If Target.Count > 1 Then Exit Sub ' Adjust Format range to suit Set rng = Range("B7:H74") ' Only look at that range If Intersect(Target, rng) Is Nothing Then Exit Sub ' Adjust conditions to suit Select Case Target.Value Case Range("B6").Value Target.Font.ColorIndex = 50 ' Green Case Range("B5").Value Target.Font.ColorIndex = 3 ' Blue ' Case "Super" ' Target.Font.ColorIndex = 6 ' Yellow Case Range("B4").Value Target.Font.ColorIndex = 13 ' Purple-ish Case Range("B3").Value Target.Font.ColorIndex = 5 ' Red ' Case "Corporate" ' Target.Font.ColorIndex = 37 ' Light Blue End Select End Sub
View Replies!
View Related
|
TRACKER
