Change Cells Address Based On Values In Another Cell?

May 5, 2014

I would like to have a cell (A2) with "H" in it. then have another cell with something like =A2&"2" which would equal H2 and actually reference cell H2?

View 1 Replies


ADVERTISEMENT

Changing Values Of Cells Based On Change Of One Cell Value

Jun 3, 2008

I am trying to do is to write a code that will change the values of cells B17:B25 to "false" when the user selects "true" from the drop-down box in cell B16.

Here 's my
Private Sub Worksheet_Change(ByVal Target As Range)

If Target.Address = "B16" Then
If Target.Value = "TRUE" Then
Range("B17:B25").FormulaR1C1 = "FALSE"
End If
End If

End Sub

This is not working! Nothing happens when I select "TRUE" in cell B16!

View 9 Replies View Related

Change Event Based On Two Other Cell Values

May 8, 2007

myColumnOne = Range("NPN").Column 'this is column B, NPN is a Named Range of B1
myColumnTwo = Range("NPCH").Column 'this is column E, NPCH is a Named Range of E1

using these variables I want to say

When data is entered into any cell in myColumnOne
first check to see if this same data already exists in myColumnOne
if it does then check to see if in the row where the data already exists, if the corresponding cell in myColumnTwo ISBLANK then MsgBox

if the corresponding cell in myColumnTwo is not blank, allow the data to be entered.

Example:
Col B.Col E
ABC..xxx
XZY.........

View 11 Replies View Related

Change Cell Colour Based On 3 Values

Jul 18, 2006

My question is i want a cell to have the colours:

Green=if within the max min range [as specified by user]
Amber=if the current value is less than the allowable slack level[again specified]
red=if the current value is less than or more than the min or max respectively.

View 4 Replies View Related

Change Colour And Values Of Cell Based On The Value In Adjacent Cell?

Nov 10, 2012

I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.

View 1 Replies View Related

Change Cell Address In Formula On Cell Value Change

Mar 25, 2013

I have below formula.i need to change the cell address AK in the below formula on the value change in the A3.

=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AK$6:$AK$3000)

For example if A3 is having value AZ i need the formula changed automatically as below

=SUMIF(Working!$D$6:$D$3000,Report!B3,Working!$AZ$6:$AZ$3000)

View 4 Replies View Related

Excel 2007 :: Cell Color Change Based On Values (Range)

Oct 2, 2011

How to change the background cell color based on value ranges(s)

I tried conditional formatting but it works between two values only, in my assignment I want to show:

River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)

I hope it is possible in Office 2007

View 9 Replies View Related

Generating Values In Number Of Cells Based On Adjacent Cell Values

May 22, 2014

What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username

The following is my code

[Code] ....

Above code runs without errors but does nothing.

View 4 Replies View Related

Change Color Of All Cells On Sheet Based Off Of One Cell Value

May 11, 2009

I want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.

View 2 Replies View Related

Identify The Cell Address Of Last Change Made In Sheet Using VBA?

Aug 13, 2012

I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.

Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.

The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.

The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.

What I have tried already:

1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model

EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid
2) declaring a range as set r = activecell.address

EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)

A solution to add to the existing "on change" event macro that identifies the last edited cell

View 8 Replies View Related

Change Cell Colours Based On Date Range In Two Other Cells

Sep 12, 2012

I'm creating a project calendar in Excel and for each task I have a Start Date (A) and End Date (B) in adjacent cells. To the right are corresponding date cells like a timeline set up with 52 cells representing weeks of the year. I.e Week 1 (C) starts at 02 Jul 12, Week 2 (D) starts at 09 jul 12 etc. up to 24 Jun 14 (BF).

Start Date
End date
02-Jul-12
09-Jul-12

[Code]......

When a start date and end date are entered in the respective columns, I need to have the color start on the cell for that range in the timeline and that color should carry out to the end date cell in the timeline. A bit like a Gantt chart but not to that detail.

View 2 Replies View Related

Change Cell Color Based On Cells Information Appearing On Another Sheet

Jan 6, 2014

I am trying to create a formula that will change the cell color in a range of cells in the row. I want the color to change based on the information in a particular cell appearing on a different sheet. What sheet the information is on determines the color the cells change to.

Example: I have 4 sheets I am working with. We will call them A; B; C; and D. I would like the color of cells A5-I5 on sheet D to change to red when the information in cell A5 from Sheet D shows up in any cell in column A on sheet A. If the information from cell A5 sheet D appears in any cell in column A from Sheet B then the color will be yellow, etc.

View 6 Replies View Related

Colour Cell Based On Few Conditions / Cell Values Of Other Cells In Same Row?

Jun 28, 2014

In the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week

I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.

The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.

The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.

View 9 Replies View Related

Copy Cell Values In One Cell Based On Value Of Adjacent Cells

Feb 20, 2014

What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)

is it possible ( with a command button) Sample attached

View 4 Replies View Related

Fill In Cells Based On Other Cell Values

Dec 21, 2009

I am looking for a way for Excel to fill in cells in a column that has data sporadically in it. I am importing a text file into excel and saving it as an Excel file.

In the example attached, I need the numbers filled in all the way down to the next number. I don't care about the text, just the numbers. I realize I can copy and paste, but these files can be several hundred rows long and it seems there should be a better way.

View 4 Replies View Related

Automatically Enter Cell Value Based On The Values Of Two Other Cells

Jan 8, 2010

I am working on blood pressures. I want cell C1 to place either, "Prehypertension","Stage I Hypertension" or, "Stage II Hypertension" depending on the values of cells A1 or B1 ....

View 7 Replies View Related

Clear Cells In A Range Based On Other Cell Values

Jun 6, 2012

I have two rows of numbers, say D1 to F1 and D2 to F2. Row D2 to F2 will always have lower values.

The range below it is D3 to F100. I want the range to clear the contents of the cells in the range where:

a) the cell is > the x1 cell above it

OR b) the cell is < the x2 cell above it

If it is = or between the two cells, the value stays.

Example:

If D1 thru F1 is 4, 5, 7 and D2 thru F2 is 2, 4, 3, then:
D3 is 5, it is cleared
E3 is 4, it stays
F3 is 5, it stays
D4 is 2, it stays
E4 is 1, it is cleared
F4 is 9, it is cleared
Etc

Basically, the cell in the range looks up its own column, compares itself to x1 and x2 in that column. If it's greater than or less than, then it clears the contents, if not, the value in the cell stays.

View 3 Replies View Related

Delete And Shift Cells Based On Cell Values

May 23, 2007

I have a spread sheet that has RX codes as field headers and ones or zeros as values. I want to find all cells which contain "0" and delete those cells while shifting the remaining cells left. The range of cells is aj1:dr17365 and the sheet name is "May 07 Rx HCCs"

View 8 Replies View Related

Clear Cells Of Values Based On Cell Selection

Jun 13, 2008

A project I am working on calls for me to implement a macro that will clear the contents of a cell (but not affect the validation list it contains) based on the selection of another cell or cells. So on the simplified attached example, I need to achieve the following;

On the fist row of options, if cell "C3" is selected, then the contents in cell "D3" are cleared. If cell "B3" is selected then the contents in cells "C3" AND "D3" are both cleared. Similar is needed for the second row of options;

If Cell "C6" is selected, then the contents in cell "D6" are cleared. If cell "B6" is selected then the contents in cells "C6" AND "D6" are both cleared. Finally, if cell "A3" is selected, then ALL of the above cells' (B3-D3 & B6-D6) contents must be cleared.

View 7 Replies View Related

Return Cell Address Of Value In A Range Contains Unique Values?

Dec 12, 2012

Here is a sample of database,

A
1
Jan-12

2
Feb-12

3
Mar-12

4
Apr-12

5
May-12

6
Jun-12

7
Jul-12

8
Aug-12

9
Sep-12

10
Oct-12

11
Nov-12

12
Dec-12

If i lookup a value in the range A1:A12, say Sep-12, i need to get the cell address instead of the value of the row. but i know how to get cell address using CELL function. but i need to get cell address when i lookup the value.because lookup value will be dynamic.

View 5 Replies View Related

Conditional Input In A Cell Based On Data In Two Different Cells And Other Values

Dec 4, 2009

I have lot of data in three columns like this. The first column is "Name", the second is "Comment" wherein I want the macro to write some comment, the third one is DOB. The problem is that the names in column 1 repeats many times. I want a macro to write in column B "either Old or Older or Oldest" based on the Name and DOB. Thus David with DOB 13 Sep 1982 be marked Oldest in Column B and David with DOB 25 Aug 1988 be marked Older and David with DOB 24 May 1990 be marked Old. Similarly William and Rita should be marked either old or older or oldest. As the data are enormous I do not want to refer the actual name in the programming. I want to call them using a variable in programming.

NameComment DOB
David 25 August 1988
David 13 September 1982
David 24 May 1990
William 24 March 1980
William 25 July 1987
William 13 August 1989
Rita 17 July 1990
Rita 24 April 1989
Rita 13 June 1988
The example file is attached

View 14 Replies View Related

Display Cell Address Based On Result Of Combobox

Jan 29, 2013

I have a combobox that returns me the names that are in a spreadsheet.

I need a return label, the index (address of that cell that the combobox returned), how do I do that?

View 5 Replies View Related

Conditional Format Color Of Cell Based On Values In Range Of Cells?

Oct 24, 2013

I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:

1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.

2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.

3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.

View 5 Replies View Related

Copy And Paste Range Of Cells Based On Number Of Cell Values In Column A

Mar 17, 2014

Please see attached sample worksheet. Column A will be generated by the user manually.

I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.

I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.

Book2.xlsx‎

View 3 Replies View Related

Moving Address From One Cell To Multiple Cells

Jul 6, 2012

I've got this large data set that I need to edit. My problem is, the clients name and address are contained with in one cell eg, John Smith, Alba Road, Bigtown. Is there some way of transferring this address into three different cells foe filtering?

View 2 Replies View Related

Detect Numbers In A Cell Range And Then Change Cells Based On What Numbers Are Found?

Feb 27, 2014

I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.

What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.

View 7 Replies View Related

Automatically Call Macro Based On Changed Cell Address & Text

Apr 13, 2009

I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.


Private Sub WorkSheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$16"
Select Case Target
Case "Custom Color 1": Call CustomColorInput1
Case "Custom Color 2": Call CustomColorInput1
Case "Custom Color 3": Call CustomColorInput1
Case "Custom Color 4": Call CustomColorInput1
Case Else:
End Select
Case "$A$17"
Select Case Target
Case "Custom Color 1": Call CustomColorInput2
Case "Custom Color 2": Call CustomColorInput2
Case "Custom Color 3": Call CustomColorInput2
Case "Custom Color 4": Call CustomColorInput2
Case Else:
End Select
Case "$A$18"

CustomColorInput 1-6 are the same except they input data into different cells F16-F21.

When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.

Function PullAfterLast(rCell As Range, strLast As String)
PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256)
End Function

When I close VBA, the data that I typed into the data input box is in the correct cell.

So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?

More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?

View 9 Replies View Related

If Statement In Macro: Macro To Change A Range Of Cells Colours Based On A Single Cell?

Mar 16, 2007

1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?

2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?

View 2 Replies View Related

Event Change To Change The Sheet Name Based On A Cell Value

Jul 21, 2009

Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far

Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub

View 9 Replies View Related

Need To Pull Street Address Out Of Full Address In A Cell

May 20, 2014

Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.

5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845

4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200

2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216

5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved