I'm having an issue where I have a macro (see attached file) that is supposed to auto-fill and sort. Twhen it tries to run the auto-fill on a sheet in its blank/template state. It will take my formulas in columns AC:AZ and fill them up to the header row.
[Code]....
This code was hobbled together using record macro and my minor understanding of coding.
(CK) Macro issue.xlsm
My macro runs when my file is opened.
The first thing I do is copy the value of one cell and paste it into another like this: Range("$E$6") = Range("$E$10")
Cell E10, the source cell, links to another file. What I want to do is get the value of that cell before it links to the other file so I can compare the difference. But, what happens is E6 copies E10 AFTER the linked values are copied - so both E6 and E10 are the same value, the value from the other file.
What can I do (without any manual intervention or reading a second file into my macro) that will give me the results I need?
I have a userform with two listboxes in them, i have set the columns in the listbox to 9 and would like to populate the column headers in the listboxes with the column header of one of the sheets.
View 5 Replies View RelatedI have a column with rows having strings as below (see sample.xlsx excel attached) .
I want to delimit the string in such a way that the for each parameter, the parameters will beome columns with headers and the value against them will be shown in thier respective column. The output tab in the attached excel might make what I am trying to convey more clear.
So basically CPU should have its own column and its time against it.
There are thousands of such column that we wish to analyse and therefore the ask.
I tried various option to delimit including recording a macro but did not work
CPU: 5,622.871 ms, Sync: 0 ms, Wait: 0 ms, Suspension: 2,399.921 ms
Ceating a macro to perform a look up and return based on column headers.
General Synopsis: Using a call and parameters to choose a lookup column and return column, and their respective sheets. Then the sub routine finding their respective column headers and perform a lookup/return. Essentially the current problem is the macro runs to slowly.
Link to original post: Lookup Macro based on column headers
I have Column A where user inputs data. Whenever a user enters a new value in Column A, I need to copy that data into Column B and then sort the whole column. Any suggestions on how to do this using a macro?
View 9 Replies View RelatedI used the macros found at http://www.contextures.com/xlSort02.html to sort columns. This solution works fine, the invisible rectangle is really good to my interests. Here's how it works: macro #1 creates invisible rectangles at the top of the columns used, at row 1 where the headers are, and assigns a second macro to the rectangles. This second macro sorts the data table based on the column whose rectangle is clicked. The problem is that this solution is for data tables, it sorts the entire table and I want to sort the one, single and only column where I click the invisible rectangle.
View 2 Replies View RelatedThis formula looks at a cell and replaces the full date with jst the month
and the year....but some cells are blank, in this case this formula sends
back "100"
I need to add something to this formula that when the cell is
blank...instead of putting "100" as it does now, I need it to put
"Unscheduled"...
Like "If 100, then "Unsdchedule"
I have a table of 5 columns (each of 50 length) that is automatically refreshed (i am getting the data from web)after an interval of 5 minutes. I want the first column to be sorted alphabetically after every 'refresh' command, that has been executed by the excel. i have tried recording the macro and then running it on keystroke of 'ctrl + m'...the table surely gets sorted out but i can't be pressing ctrl+m every 5 minutes. auto-sort that is required to be executed after the auto refresh command..
View 6 Replies View RelatedI am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
on a vb user form list, made from the control toolbox
I enable collumn headers but have trouble populating them
From what i could get from google, it seems the only way to populate them is by having the data on an excel sheet. Can you just do it through code?
I have another list which the data is on an excel sheet but I can't get my headers working.
I have been using
frmAct.listCodes.RowSource = ("A1:C39")
frmAct.listCodes.RowSourceType = ("Value")
It doesnt like "Value"
In the attached file is it possible to use cell/ array formula in cells P3 to R6 to lookup names (Column O) within the data range (Columns A - M) and return the values shown in the yellow shaded area?
View 8 Replies View RelatedI have been given a spreadsheet with standard configuration with column headers etc, but when you scroll down the sheet the actual column headers change from the normal A-Z display to be the column headers that have been entered into the cells.
I know this can be achieved similarly by setting Freeze Pane but how this other option has been switched on. I have attached the spreadsheet (which has totally fictitious content).
I have data as follows in Column A:
Part Number: 0000000-1 ARTEC-GH-56S 12A
SPARES in Repair: 20
On-hand: 100Location: BNCD
I need the data under different columns as follows: I also want an extra column before Column A labelled as Common number.
A B C D
Part Number SPARES ON HAND LOC
0000000 20 100 BNCD
My and a work college needed to combine our separate excel worksheets into a single document.
Office 2013 didn't have a function to "import sheet from file" so we used open office to import my .xlsx worksheets.
After we finished importing we exported the final workbook as .xls (so I could open it).
After opening the workbook on my pc (excel 2013) i notice some of the sheets no longer have column headers, but the row headings still exists. (No ABCD, only 1234)
Also I am unable to use features such as "Freeze Pane"
I suspect this was caused by importing and exporting through open office?
How do I set up the formula bar so it doesn't cover the column headers?
View 1 Replies View RelatedI want to return the column headings (the months) where there is a 'No' value, per person. How to do this?
Here's the screenshot
Screen Shot 2014-03-17 at 11.45.34 am.png
And here's a dummy version:
Example Spreadsheet.xlsx
I have a table with headings for each column.
How can I make the columns headers buttons/clickable, so that it sorts the rows on the column that was clicked upon?
I want to include columns in my Pivot Table where there is no data for that column. For example, I want to show 12 columns, one for each month, but my data only has 9 months of values.
View 3 Replies View RelatedMy spreadsheet has in the region of 30 columns, more will be added on occasion in the future and ultimately I want to have each of the column headers appear in a 2-tiered dependent combo box. In the following structure:
Category 1:
Header 1
Header 2
Header 3
Category 2:
Header 4
Header 5
Header 6
Header 7 etc...
What I'm not sure about is what the most efficent way of making it so that it will automatically add new Column headers (and possibly categories) to the drop-down box so that it does not need to be re-coded in the future.
I currently have a worksheet filled with data from other worksheets. I want to combine data from different columns when they share an identical row header and don't know how. For example:
1b--
1--c
1-d-
2-x-
2y--
2--z
Would go to:
1bdc
2yxz
Another specific issue is that some row headers are bold and need to be considered a separate header from the non-bold alternative.
I have a small sample table that replicates what I am trying to do
A
B
C
D
E
1
Bob
Jim
Mary
Sue
[Code] ........
I would like to have excel put in compile the list of members on Teams 1 through 4. So in A7 through A10, I will put the teams and then in the B column I want the compiled list seperated by commas for each team so that they read like this...
Team 1: Bob, Jim, Mary, Sue
Team 2: Bob, Jim, Sue
Team 3: Bob, Mary
Team 4: Bob, Sue.
Of course this should be dynamic so that if I place an x in C4, then Team 3 would read as Team 3: Bob, Jim, Mary.
I have tried various index match offset combinations and did not have any success.
Is there any way in Excel to create single-cell named ranges from a combination of the labels in the rows and column of a spreadsheet.
Here is an example:
CompanyA
CompanyB
CompanyC
CompanyD
Sales
100
200
[code]....
I would like the first cell (containing the 100) to have a defined name of (something like) "SalesCompanyA", and the second cell to be "SalesCompanyB". And so on - e.g. the cell with 300 in it should be "CostCompanyA".
I can do it manually, but I have a huge spreadsheet & was hoping it could be automated. Just to be clear, it needs to be a single cell range. I know you can create a range from a selection - but this seems to create ranges of the entire row and/or column.
I have individual date columns with calculated field in the next column, and this goes on for the rest of the worksheet. Example,
Column Header H to N consists of dates ranging from 2/24/2014 to 3/2/2014.
Column O will be the new column.
I want to change the new column header with the combined dates in the first column and the last column , i.e. the column before the new one, with a "To" text in between these two values. That way it becomes easy to identify the new column headers which are supposed to be week-wise.
So, for this example, it will be Column O = "2/24/2014 To 3/2/2014"
i.e. Column O = "Column H1" To "Column N1"
I did not want to bother you again but I have a problem that I can not solve it because my knowledge in vba etc, are limited and could not become to find with Macro Recorder.Usually I solve the problems on my own by searching on Google and experimenting with ready Macros and Macro Recorder.
I have an excel file with a macro and I want before this macro launched, to run another macro that can check if the headers have the correct name and in its correct position. The headers is in first Row.
If are not in the correct position or if it doesn't exist or if not have the correct name, then the process of the next macro be stopped and of course be informed that there is a problem.But if Is everything okay, then proceed to the next macro and be informed that Is everything okay.
I have attached a Sample file with the headers i'm using.
Sample...xlsm
[Code].....
I've done some searching and cannot find the right answer for my question. I need to create a formula that will pull column header text data based on cells within a table that contain a numeric value not equal to zero. The catch is that I cannot use any one specific numeric value as the basis for a Lookup.
I've attached an example spreadsheet for reference. Basically, I need two formulas:
1. Formula to pull column header (Receiver name) based on Sender. This is a necessity.
2. Formula to pull individual lines for those senders that have multiple receivers (Division D in my example).
My actual data file has 80+ senders and 100+ receivers.
I'm currently faced with a spreadsheet that has data formatted like this:
A
1 RandomRowofData1
2 RandomRowofData2
3 RandomRowofData3
4 RandomRowofData4
5 RandomRowofData5
6 RandomRowofData6
7 RandomRowofData7
8 RandomRowofData8
9 RandomRowofData9
Every 9 rows, a new "set" of data repeats itself (wow, this is so hard to put into words)....
I need to figure out a way to get the data in column "A", every 9 rows, to transpose itself into 9 separate columns.
I have been struggling to find where my code is throwing up an error 1004 on the last line of the below code. I have a number of tables which will update automatically from Pivot tables on another sheet.
So the first part of the code is adding in the new column and then I want to autofill the date into the headers of the column which I thought the below would do, but I just don't understand why I keep getting the error. My data is dynamic as it will grow month by month which is why I am using R1C1 referencing.
Sheets("PNN Table").Cells(9, 16384).Select
ActiveCell.End(xlToLeft).Select
ActiveCell.Offset(0, -2).Select
Selection.AutoFill Destination:=Range(Selection, Selection.Offset(0, 1))
I am trying to go through each worksheet and if the worksheet name is Hematology then the header columns will be put into the listbox (ListBox1). The first row of the header is the parameter and the second is the units. Ideally I'd like column 1 to have the first headr row and column 2 to have the second header row. Once the listbox is completed, the user can select multiple columns by the header and those columns will be deleted. I have the ListStyle set to 1-fmListStyleOption and MultiSelect set to 1-fmMultiSelectMulti
The only thing I get when I run the rubroutine is a userform (Hematology), an empty listbox (ListBox1) and my two command buttons (Nothing to Delete and Remove Parameters).
Private Sub Hematology_initialize()
Dim Wrkst As Worksheet
Dim Header1 As Range
HeaderRange1 As String
For Each Wrkst In Worksheets
If Wrkst.Name = "Hematology" Then
For i = 1 To Wrkst.ColumnCount
Set Header1 = Wrkst.Cells(5, i)
HeaderRange1 = Header1.Address & ":" & Header1.Offset(1, LastColumn).Address
With Hematology.ListBox1
'Clear old ListBox RowSource
.RowSource = vbNullString
'Parse new one
.RowSource = HeaderRange
End With
Next i
End If
Next Wrkst
End Sub
I'm using this Macro to merge 40+ reports. It works great except it keeps pulling the headers over.
This wouldn't be that big of a deal, except that for every report I merge I have to click "OK" approx 10 times because the lines have the same title.
Is there a way to prevent this?
Sub simpleXlsMerger()
Dim bookList As Workbook
Dim mergeObj As Object, dirObj As Object, filesObj As Object, everyObj As Object
Application.ScreenUpdating = False
Set mergeObj = CreateObject("Scripting.FileSystemObject")
'change folder path of excel files here
[Code] ......