Example: I have Sheet 2 set to autocalculate on activate using vb. So when you click on that tab "Sheet 2" it will autocalculate.
My Question is, I have another macro that is copying information between Sheet 1 and Sheet 2. And I don't want calculation to occur during the macro but since it has to select Sheet 2 it performs the autocalculate. Do I have any options to prevent the calculation from occuring when I run my copy paste macro? I only want it to autocalculate when the user selects sheet 2
I have a worksheet in which i have rows with yellow colour. In that sheet I Have written formula in that cells & rows. But i want that as soon as the total (SUM) of yellow coloured row crosses value 20 ALL THE ROW CELLS SHOULD BE ZERO. How can i do this
I have a report whose calculation time I've reduced greatly by turning off automatic calculation and including in the worksheet code directions to only calculate the impacted range. BUT, it still takes a lot of time to calculate on close, when I turn automatic calculation back on. I'm afraid my users will think their machines have crashed. Does anyone know of a way so that on close, the workbook does not calculate, even though Calculation is turned back on to automatic?
Private Sub Workbook_Activate() With Application .Calculation = xlManual .MaxChange = 0.001 .CalculateBeforeSave = False End With End Sub
Private Sub Workbook_Deactivate() With Application .Calculation = xlAutomatic .MaxChange = 0.001 End With End Sub
This formula is being used in a vacation time spreadsheet. So after each paycheck the if statement is applied and need to calculate the accumulation for that week based on if the person has worked 5 yrs or less. I need to stop the today's date calculation in the if statement after it is used. So that each time the spreadsheet is opened the values are a fixed number not changed based on the current date. However if the if statement is pasted into the next pay week it will calculate based on the actual date.
It is calculating is the following:
C4 = 5yrs Anniversary Date of Hire 3.08= less than 5 yrs 4.62= more than 5 yrs
Column A gives the request date of the order, based on the TAT in column B the projected dispatch date gets calculated.
Once the order is dispatched and the date gets updated in column Z, the redemption status in column V gets updated as "Dispatched within TAT" or "Dispatched out of TAT" based on whether they have met the TAT or not. If the dispatch date is left blank then it shows "Yet to be dispatched".
My problem is that the column D does not stop calculation even after the order is dispatched. And therefore because of the conditional formatting turns red the minute the number is more than 0. So it is misleading.
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
I have a IF formula that check if “F13” cell is "+" if not do calculation (F13-E13) and stop, if yes go to the previous line and check if the “F12” is "+" if not do calculation (F12-E12) and stop, if yes continuo to the previous cell and so on until you find cell without “+”
The EXCEL IF formula is =IF(F13="+",IF(F12="+",IF(F11="+",IF(F10="+",IF(F9="+",IF(F8="+",E8-F8),F9-E9),F10-E10),F11-E11),F12-E12),F13-E13). I'm looking for VBA code with FOR to run and do the same without the limitation of 7 if inside if.
i didn't realize is that my current funcation that calculates vacation hours... will increase after a new year. i'd rather have it not increase until they are "reset" for the new year. how do i stop the function? =VLOOKUP(DATEDIF(A8,TODAY(),"y"),$S$8:$T$10,2)
basically goes to a lookup table with the caculations. PROBLEM: if a user's anniversery date passes, they may go from a 1-2 year status to 3 year bump... this will auto adjust the amount of vacation hours they have. if the reset button is ran to calculate the vacation hours, it might over calculate giving the user 40+ extra carryover hours. anyway i can make this vlookup stop when the current date is or has passed the anniversery date, yet has not been reset? maybe a count down timer, not sure. http://www.ozgrid.com/News/excel-eva....htm#ExcelTips
I have the below code (pieced together and donated by other users on the forum)
Application.Calculation = xlCalculationManual ' Application.DisplayAlerts = False Application.ScreenUpdating = False Dim Ctr As Long 'set ctr for Invoice Dim wsData, wsInv As Worksheet Dim Ibk, Rbk As Workbook
Set Ibk = Workbooks("Invoice.xls") 'Invoice as Ibk Set wsInv = Workbooks("Invoice.xls").Sheets("Invoice") Workbooks.Open Filename:="\cmc-dc01usersdcMy DocumentsProjectsRemake GoodyearRentCharge.xls" Set Rbk = Workbooks("RentCharge.xls") Set wsData = Workbooks("RentCharge.xls").Sheets("Sheet1") With wsData........
I have a nice little matrix which looks up loans and tells me the status of various modules within them
It looks something like this:
Code: =IFERROR(INDEX(AssignedLoans,MATCH($H$6&$D49,ModuleName&LoanNumbersList,0),8),"") and it is an Array.
Now, it is working fine until it gets to row 50 then it stops returning values. What's up? There is no difference between the rows except for the loan number change (from D49 to D50...etc). I looked up the loan number in the source document and it's there, so it's not that the source document is missing the information.
The sheet was working fine, then all of a sudden (i dont know what i have done) the up and down arrows (on my kayboard) wont work when the sheet is protected, when i unprotect the sheet they work fine, i can use left and right. i have checked the scroll lock isnt pressed/illuminated on my keyboard.
This is about the attached sheet where I have a command button and I would like to have the below results.
When the command button "Calculate" is pressed then Using the amount from col "G" and the reduction from col "H" in the amount in col "A" and the reduction in col "B" for all the lines.
Identfy the lowest value in col "A" -greater than zero- along with the related duration to be placed in the corrosponding columns "I" and "J"
I have 40000 rows filling with data from column a to g, autofilter is alway on on said columns , the problem is that when I select any column to filter data as per my query , it takes long time to display result and sometimes it hangs with the msg xyz workbook is not responding.
Can I set up my workbook so that the formula Auto Calculation works on one of the sheets, but the other two sheets only calculate on saves.
I have three sheets in a workbook. 1 of the sheets is used for data entry and there are quick small visual formulas on that sheet that make data entry easier and produce mistake double checks. But the other two sheets are formula intensive and take a few minutes to calculate which is fine considering it only calculates on save. But I need to be able to have the one sheet calculate automatically while these other two are only on save.
I made a time sheet which calculates number of hours worked and so on. Now I would like it to calculate the wages as well. The problem is that there is a higher payment for nights.
- $16 per hour on regular hours - $24 per hour from 23:00 to 07:00
How can I formulate it that I get the total payment taking into consideration nights?
Is there any way to automate the calculation of a single sheet? IE to calculate when moving from cell to cell after entering data without calculating the whole workbook and any other open workbooks.
1: Is their anyway I can get rid of the File, Edit, View, etc buttons at the top of the document so everyone that opens it can not see them? and also the save button, the idea is they have to use the button to save the sheet.
2: I have a button on the sheet with a macro that saves the sheet once it has been worked on, the sheet flashes when this button is clicked is there any way I can stop the sheet flashing ?
i need to make a button that Immidiately stops all macro's, Or (and This will maby be little more difficult) Stop all macros on a specific time inserted in 1 cell
the macro's that i want to stop running, are all single macro's which i activate with only 1 button i created.
i like something like this:
if "A1"(this is the cell where i have my updated clock) == A2 (the time i insert here stops the macro's at this time) do stop Macro's
If you run it now, ctrl t, it produces letters and changes alphabets as it hits a yellow box. If i change or add a yellow box, the letters change fine. The macro works perfectly, but instead of inputting the range or K3 to what ever, i would like to to run this macro and stop once it sees the row with the sort number of 4. ( this changes row postion depending on which sheet im working on, this is the problem).
I have a large XLS file will a lot of volatile functions (offsets & sumproducts) and I've recently had to add a sheet, making it even bigger. I have a problem that previously occured occasionally but now it happens consistently. Every time the workbook is recalculated, the Excel window is repainted with partial overlays of every visible worksheet. The result is a visual mess. The window's appearance is fixed by doing anything that forces Excel to repaint again, like clicking to another sheet and back. But it has become next to impossible to enter data with automatic calculation turned on.
ScreenUpdating is turned off when my macros run and besides that, I'm not doing anything with worksheet calculation events. I do have a Workbook_SheetChange event subroutine, but that is run *after* the recalculation so it's not the cause.
The problem occurs only when macros are enabled. If I disable macros, Excel behaves normally.
I have two Excel installations and the problem is happening only in Excel 2007 under Vista. It doesn't happen under my Excel 2003 on XP, though I think it may be happening to others with 2003 & XP.
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code: Sub CalculateDeviceFailureTimes() ' ' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System ' Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
I have a spreadsheet containing a macro to automatically sum values from week to week and display the max/min and average. This is almost fully working. The problem I have is the macro copies the sum formula down the page and doesn't stop at the last row. It always adds one or two extra rows. The formula should stop at row 77 however this does not happen and therefore the sum keeps going. Which in turn, distorts the max/min figures.
I'm trying to create a macro to input information into a cell then repeat until the information stops.
So say I have 10 rows of information that fill up A1:D10. in E1:E10 I'd like a macro to insert some data into E1 then go to E2 and do the same until the end and then stop. So since A11:D11 would be blank the formula would just stop.
I actually work on 100's of cells a day and this is for a bigger project I'm trying to put together or I would just drag.
I have got he below code in "thisworkbook" it works fine but I have a problem with it if it has been closed before the time expires. If it is closed it tries to reopen it and then close it again. So for my users who have got their security set to prompts the file will be closed and a message box appears saying "enable or disable Macros". If it is already closed than i dont really want this to happen. My security is set to low but i still see it flash up and the bottom then dissappear again. How can i get the Macro to stop if it has already beed closed??
Private Sub Workbook_Open() Sheets("database").Select Range("au16").Select Application.OnTime Now + TimeValue("00:15:00"), "TimeOut" If ThisWorkbook.ReadOnly Then MsgBox ("The file is currently being used by another user, please contact them to ensure they have not left the file open.") ActiveWorkbook.Close SaveChanges:=False End If End Sub
Sub TimeOut() ThisWorkbook.Close SaveChanges:=True End Sub
