I have the following macro
Code:
Sub del()
Dim myRange As Range
Set myRange = Range("AK3:AL3" & Range("AL" & Rows.Count).End(xlUp).Row)
For i = 1 To myRange.Rows.Count
If myRange(i, 1) >= myRange(i, 2) Then
myRange(i, 1) = ""
myRange(i, 2) = ""
End If
Next i
End Sub
How do I add a condition that will stop the macro if myRange = ""/is empty?
the code below works fine except for the fact that it takes FOREVER to complete as it has to loop through almost 2000 rows... How to optimize this code so the macro stops as soon as it encounters an empty cell? There is currently only 50 entries in the database, but with time it will exceed 1000 entries and therefore i can't simply say Range("H2:H50").
Code:
If OptionButton1.Value = True Then
'Show all Car Cases
Sheets("User-defined Database").Activate
For Each cell In Range("H2:H2000")
[Code]....
I seem to be lost in some macro-coding... I have this folder with pictures, and I want to display them as comments, by a macro. So far I have control. But then, if there is a picture that is missing, or if there is a cell that is empty in the selection, everything seems to stop.
the macro I use is very simple, but when everything is in place, its working:
Sub pics()
For i = 3 To 50
PicName = "C:UsersEspenPicturesHus" & Cells(i, 1) & ".jpg"
With Cells(i, 1).AddComment
.Shape.Fill.UserPicture PicName
.Shape.Height = 300
.Shape.Width = 400
End With
Next i
End Sub
Is it possible to make the macro run even if there are wholes, or if some pics are not store in the folder yet?
Is it possible to make the area "unlimited", as you see its now limited from 3 To 50.
And is it possible to make this run automatically, kind of checking the folder on its own to see if there is new pics?
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedI am trying to use a macro to check if any cells in a range of cells are less than 0 before proceeding.
VB:
Sub Macro()
If Range("F2:F49") < 0 Then
MsgBox "Please verify column F."
Exit Sub
[Code] ....
I need a macro to go through one column until it hits a blank cell and stop... the criterea of the loop:
if cell = "Multi" then **Move to X tab** else **move to X2 tab**
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I would like to have an alert msg to prompt the user whether he/she wan to proceed to run the macro upon the macro button is pressed. However the alert msg will only pop up if cell value, A1 is not empty. In the alert msg, The user will have an option to choose to run the macro and do not run the macro.
Another question. I have a macro copy some data from other workbooks. I would like to alway return to a worksheet, named"Summary" after the macro is run. any way to do that ?
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedMy code and see why it's not executing properly?
[Code] .......
I have a worksheet of approx 13000 rows and want to use a macro to delete a row if a certain cell is empty - is this possible?
View 3 Replies View RelatedI'm looking for a macro that will search through E2:IV2 and take me to the first empty cell in that row.
I've tried a couple of things but none of them seem to do anything.
I am trying to write a macro which searches for a certain value (*?CNMT_LBID) in my worksheet, then copies it, plus the two cells to the right of it, to the first empty cell in the row above.
I have got so far, but am now stuck! I am not sure how to specify the row above my current cell, and then find the next blank cell to paste into.
Also, I'm not sure if my code is correct, any corrections are welcome!
Sub Move_Data()
'
Dim i As Integer 'for loop below
Dim rng As Range 'Cell to start 'cut' from
'rng = cell containing "*?CNMT_LBID"
Set rng = .Find(What:="*?CNMT_LBID", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
'Loop to cut cells "*?CNMT_LBID" plus next two columns to the right, and place in empty cell in row above
For i = 0 To 2
rng.Offset(0,i).Cut( )
Next
'delete now empty row
rng.Row.Delete
End Sub
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
Sub Macro1()
'
' Macro1 Macro
'
[Code]....
The following macro does well at concatenating 2 constant values and the values in columns A and CF and places it in the CP field. What I need to know is is it possible to modify this code so if there is NOT a CF field cell value (that is it is blank) that the formula does not run and moves on to the next row? That is, the CP1 cell remains blank?
View 1 Replies View RelatedI would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.
View 5 Replies View RelatedIn columnA I want to jump to the next blank cell in a list that continues to grow. So the first time I run the macro I want to go (blank) cell A5 to paste in some data. The next time I run it, it would need to go to cell A6 and so on.
When I do this manually, I simply hit ctrl down-arrow (takes me to the last cell w/data) and then one more down-arrow to take me to the empty cell below.
When I do this in the macro it seems to remeber the cell as an absolute reference (if that's the term) and so it just copies info in the same location as previous, instead of the next empty cell.
I have this macro and at the present time, can only compare two worksheets. One of my worksheets contains column headers with data, the other worksheet just contains column headers. The macro will match the data against the column header and paste below. I'm doing it this way because I have several tables I export from a MySQL database, but some of them have more fields than others so I was trying to get all of the data to line up in under the correct column header from each table. I need editing the macro to allow for
1) More than one worksheet to be analyzed at a time
2) If the first request is not possible, I would like for the macro to paste results at the next empty cell. As of now, it will only copy one at a time (which requires me to house the data in another worksheet everytime I run the macro).
Below is the code:
Dim ws1 As Worksheet, ws2 As Worksheet
Dim HeaderCells As Range, Hdr As Range, hdrFIND As Range
Application.ScreenUpdating = False 'speed things up
Set ws1 = ThisWorkbook.Worksheets("HEADERS") 'Define name of worksheets
Set ws2 = ThisWorkbook.Worksheets("B")
[Code] .......
I need to write an excel macro to trace the valid PO# in my daily report.
Below is the condition:
If the PO# is an empty cell, the result return at column B as Not Valid
If the PO# starts with any character (example: FISHNH123), the result return at column B as Not Valid
If PO# is not starts with 3000 or 490 or 450(example: 3000823041,3000823037), the result return at column B as Not Valid
PO#
Status
empty cell
Not Valid
PO# starts with any character (example: FISHNH123)
Not Valid
PO# is not start with 3000 or 490 or 450
Not Valid
I'm using excel 2010..
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
View 4 Replies View RelatedHere find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
(Excel 2010): Hide row if cell C in this row is empty.
I've just started using macros and I'm sure there is one for this problem.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
i need to make a button that Immidiately stops all macro's, Or (and This will maby be little more difficult) Stop all macros on a specific time inserted in 1 cell
the macro's that i want to stop running, are all single macro's which i activate with only 1 button i created.
i like something like this:
if "A1"(this is the cell where i have my updated clock) == A2 (the time i insert here stops the macro's at this time) do stop Macro's
