CELLS AA5:AA64 will have either EF, CS, SBS and/or, RP. Cell AA16 could be "EF / CS / SBS" and AA20 could be CS. I want Cell AA65 to count show how many CS's have been entered in that range. How would I do this.
View 3 Repliesin excel how do I count cells that begin with specific text. Ex: in a
column with 100 entries, I want to count the number of cells that have the
letters "app" from the word approved as the first three characters in the cell
I have a spreadsheet where i would like to 'count' the number of cells with a particular colour AND SPECIFIC text (not 'any text').
I attach a xls with the initials of the person in column A, their colour as seen in cells in next four columns with the particular text in each cell. Therefore, for 'ABC1', in the given range, I would like to count how many cells have been allocated with the particular colour (brown, do not know colour index) and the particular text (1 or 2 or 4 or 5) in the range A1:CK39. Haven't supplied the actual sheet for confidentiality reasons.
I have a spreadsheet that lists all the work done by employees within a specific area. Some employees cover multiple areas.
I am now needing to work out the average work completed by each area. I need a formula that will count the number of employees by each work area.
I know this is something I have done before, but my mind has gone blank and I can't for the life of me work it out again (it's one of those days).
Row 3 of the spreadsheet contains the codes for the work areas they cover (CM, V & TC) and some employees only cover one (which would be a simple CountIf) but some have multiple.
What is the formula to, for example, count the number of people who have CM in row 3 even if they also have other entries in that cell.
I have attached an excel sheet and I want to count and report frequencies the amount of X that are occurring from the 'CSR1' book in a table in the 'Frequency' book.
The CSR1 book has 4 sections and I need to formula to adjust the total percentage accordingly if only 1, 2, 3 or 4 sections have been populated with data.
Please see attached.testdata.xls
How to be able to count cells with a specific color (green) and a specific value (8210) for example the sum of the info I am needing below should be 2 even though there are technically 3 - 8210 cells.
8260
8210
8210
8220
8220
8250
8240
8260
8250
8210
8280
I am trying to find a formula that will give me a word count in specific cells.
View 14 Replies View RelatedHow would you be able to count all the used cells in a specific column?
I know the following would count all used cells in a worksheet but what about a specific column?
Here is the formula I am currently using:
=SUMPRODUCT((Sheet1!B19:E15235="Contact Sheet Available/Disc Sent")*(MONTH(Sheet1!H19:H15235)=MONTH(TODAY())))
This counts all entries with the status "Contact Sheet Available/Disc Sent" and that have a timestamp within the current month.
I need to alter this to count the last week in September and the first 3 weeks in october (using this month as an example and will have to have to be able to run without changing dates next month).
I want code to count cells that contains only specific word like ( do)
View 4 Replies View RelatedI need to use the COUNTBLANK formula but don't want to include cells that are in grey.
View 7 Replies View RelatedOne has numbers the other has "YES" or is blank. I want a formula to look at the second column and where there is a "Yes" then count the number in the same row in the first column.
View 4 Replies View RelatedI use an excel holiday planner.
Holiday days are infilled red.
How do I count the number of red filled cells at the end of each line?
If I have cells in my worksheet filled with yellow color, is it possible to count them based only on this criterion (fill color). They might or might not be in the same column.
View 4 Replies View RelatedI need to count the grey coloured cells in a column based on the value in a different column (Column I has the team that the person is in). I already have a code from a previous thread to count the coloured cells (below) but this doesn't work when using an array formula. I have also tried just selecting the cells I need it to count (the people within the specific team), but the formula doesn't work unless the range uses adjacent cells...
View 7 Replies View RelatedIs there a way of counting how many rows have cells containing a specific word. Some rows will have multiple cells with the word in and some will have none. I only want a count of the number of rows and not the number of times the word appears. How can i acheive this with VBA?
View 3 Replies View RelatedIs it possible to have a column count up if two other cells meet criteria?
What I would like to happen (if it is even possible) is, if cell B1 equals CO and C1 is a duplicate, then G1 enters #1 for the first time it is duplicated, #2 for the 2nd time it is duplicated, etc.
Is this even capable of happening.
I am attaching my spreadsheet (TAB "AG Orders"). I filtered the spreadsheet so you can see an example of what I am looking for. I manually typed in column G but I was hoping these numbers could automatically populate.13-14 budget-AG test.xlsm
I want to count the number of groups of 3 adjacent cells in a horizontal range (C5:EV5) in which any cell in the group of 3 has a value in it (as opposed to all the cells being blank or containing "0"). For example, if any or all of the cells in C5:E5 have a value in it, it would count as 1, and if any of the cells in the group F5:H5 have a value, it would also count as 1, and so on. Is there a way to use COUNTIF for this?
View 5 Replies View RelatedI have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.
The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.
If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.
I have a spreadsheet which is linked to several other worksheets. I have managed to include formulas to count how many cells have numbers between 101 and 5000 by using this formula -
=sum((h2:h500>=101)*(h2:h500<=5000))
but now I want to count the number of cells in another worksheet that are equal to or less than zero. When I use the same formula as above it counts all the blank cells. I have tried using a countblank formula and then deducting this from the result, but unless the other worksheet is open the countblank formula does not work.
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI am exporting lots of data from a website and for some reason to do with html i am getting &nbsp; in a few cells in my description column (column C), i think that means "& " in html. this occurs in some cells but not others when i paste it into Excel. I would like to remove these characters.
I know I can do it with crtl H and the replace field blank but I would like a formula so in the future the user will simply have to paste information and then get converted information out (as they will struggle to use excel).
What I am attempting to do is search if 2 cells contain specific text. For example in Column C I want to output "Yes" only if cell A and B are Yes otherwise the output is "No".
ABC
1YesYesYes
2YesNoNo
3NoNoNo
I have tried =IF(A1=B1="Yes", "Yes, "No") to no avail
I would like to write an If clause to do the following. If the cell is colored blue (color index 32), insert the text "ignore" in the cell
View 6 Replies View RelatedWhat i need it for certain colored text to appear in specific total cells.
For example; i have 38 cells in a column within these cells id like it to have black writing which i want to total up and go into a total for that color into a specific cell and say green colored text into a different total cell and red text into another total cell.
If i had for instance 6 numbers all red 6 numbers all black and 6 green id like the numbers to all be added correctly and also into color specific cells?
The easiest way of explaining what I'm after is to say, I have letters of the alphabet, in their own cells, and I want to find them by way of a search. I don't mind how this is done, but it would be good if for example you entered A, C and E, any cells containing those letters changed, maybe became bold, or the cell filled with colour.
View 9 Replies View RelatedI am trying to count all devices by model on sheet1 (FY13 4th QTR Meter Reads) into cell B524. The range is D2:D519.
Where I run into trouble is when I filter the data by Campus, I only want excel to count the number of devices for the model listed (A524) and place it into B524 for the visible rows.
The current formula I'm using is:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(D2:D519,ROW(D2:D519)-MIN(ROW(D2:D519)),,1))*D2:D519=A524)
I have a workbook used for scheduling purposes and you can add hours to it by typing in D+1 or D-1, etc. I want to prevent this from working and just ignore the cell if the cell contents say "DC". I've tried to adjust my formula but haven't had any luck. I've attached an example worksheet with the formula for an easier understanding.
Formula: [Code] .......
Attached File : Testsheet.xlsx
Im sure this has been addressed before but i need a macro that would act like a "Contains" function. I have Column B that has user comments. These are sentences like "I have a billing issue" or "My item is damaged". My goal search these for keywords and then have a value (category) populate in Column C
Heres an example. the Category is Damaged Goods: Keywords associated with it are "broke" "broken" "replacement" "damaged" "not working"
Another category is Billing: keywords include "bill" "credit" "account"
I need a macro that will search all the comments and if "broken" (for example) is found anywhere within the comment, the value "damaged goods" will be populated in the same row, column C
In the attached sheet I need to check on the Destination in column B, and if it matches set criteria, divide the figure in Column E by 2. eg If LAX is the destination, then for any rows directly under LAX until the next destination appears, column E needs to equal column D divided by 2. If the Destination is not LAX, then Column E equals Column D.
the difficulty I am having is that there can be a variety of row numbers for each destination. I am having trouble creating a formula that can basically work backwards from Row-1 in column B until it gets to a text string, and check that text string against the criteria. so it may be row -1 up to about row -9 dependant on the number of flight times available to each destination throughout the week.