I have a workbook used for scheduling purposes and you can add hours to it by typing in D+1 or D-1, etc. I want to prevent this from working and just ignore the cell if the cell contents say "DC". I've tried to adjust my formula but haven't had any luck. I've attached an example worksheet with the formula for an easier understanding.
Formula: [Code] .......
Attached File : Testsheet.xlsx
I am working on Excel 2000. I am creating a protected worksheet which will have conditional formatting and validation on manual input cells (formatted to light yellow). I want to make sure that people do not accidently forget and paste data into those cells. I read up on solutions from this thread; [url] and most of it seems to be more complex than what I needed (and I couldn't get it to work)
I copied some code from this website post
[url] to my worksheet.
It works fine if the Validation criteria is set up simultaneously (i.e. it's all the same) but does not work if the columns have different validation criteria. How can I modify it to work under those conditions? I have included two workbooks, one in which the val critieria is identical (and it works) and one in which it varies between columns (and it doesn't work). I also noted that if I modify the one that doesn't work to make it homogenious, it still doesn't work unless I go back and highlight all and reformat that way.
How do I prevent or allow text to be entered into a Cell or not. Ie if cell A1 contains the word "Text" I want text to be able to be entered in A2, but if A1 contains "No Text" if want to prevent text being entered A2. Is this possible, if so how?
View 1 Replies View Relatedformula using if's and vlookup's to populate a calendar with x's for day a person is gone. however the last couple of people that are gone are not being marked on the calendar even though i use the exact same formula (except for cell numbers and such) for previous, working entries. Here is my formula
View 9 Replies View RelatedI am downloading my data in the eze tab. Column b is in a text format. How can I amend my formula on the trading statistcs tab for my sumproduct formula to work?
View 7 Replies View RelatedHow can I protect individual cells in a range from being deleted when I want to delete data from the surrounding cells??
View 3 Replies View RelatedI have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx
BIRD
FISH
DOG
BAT
BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS
FISH
TAILS
BAT
BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
I have a formula to find if the Symbol "!" is contained in the a cell. And i want it to input "Undercut Due to Trim Edge" if there is a "!" symbol and blank if there is not. What did I do wrong?
=IF(ISNUMBER(SEARCH("~!",AL57:AV57)),"UNDERCUT DUE TO TRIM Edge","")
I have a workbook that is going to be used as an offline 'database', recording issues being worked on and all the necessary details e.g. time logged, user, problem type, comments etc. A lot of this will include vba for automation and validation etc.
This will then be exported in comma seperated .txt format. So I don't want anyone putting a comma in a normal field within Excel. I'm sure I remember a way of blocking certain character entry a few years back when I was working on a similar problem. However, time is getting the better of me so is anyone able to help save me some time and point me in the right direction? Trying to find a suitable search string for this question is proving tricky.
if it is possible to prevent a listbox from showing blank cells.
I have selected a big range and many of the cells are blank. The reason is that I want the listbox to update automatically when I add a value to any of the blank cells.
Using the methods suggested by the posters here I was able to solve my problem. I had to modify my source data somewhat but it was well worth it.
I've got a table that has to be manipulated by multiple users. Within the table I have several column ranges with validation lists (in drop down boxes) in order to limit responses. However, I'm finding that most of the users are pasting data in from other sources that may not have been in the validation list, or may be in a different format, etc., and it essentially undermines the reason for using the validation.
I've tried protecting the sheets using various options and tried looking around online for a solution, but I'm not finding how to get around this.
The formula itself seems to be working alright. It's on the post tab in cell R74. I modified it to temporarily to sum up a random group of cells, with half of them red and it worked correctly. The problem seems to be in the time calculation? Jennifer has 54.25 hours. The hours on Monday were coded in red and were not in the same group as the rest of her hours. So I need to extract the 9.5 hours from Monday, coded in red.
Unfortunately it comes back with a value of 31.5 hours. I see now how its getting that. The numeric values of cell C74 and D74 equal 1.3125 which is equal to 31.5 hours. But I'm not really sure how to go about calculating it the correct way. The worksheet can be viewed at: http://www.buckeyeperformancehorses....HEDULECODE.xls
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI am exporting lots of data from a website and for some reason to do with html i am getting   in a few cells in my description column (column C), i think that means "& " in html. this occurs in some cells but not others when i paste it into Excel. I would like to remove these characters.
I know I can do it with crtl H and the replace field blank but I would like a formula so in the future the user will simply have to paste information and then get converted information out (as they will struggle to use excel).
CELLS AA5:AA64 will have either EF, CS, SBS and/or, RP. Cell AA16 could be "EF / CS / SBS" and AA20 could be CS. I want Cell AA65 to count show how many CS's have been entered in that range. How would I do this.
View 3 Replies View RelatedWhat I am attempting to do is search if 2 cells contain specific text. For example in Column C I want to output "Yes" only if cell A and B are Yes otherwise the output is "No".
ABC
1YesYesYes
2YesNoNo
3NoNoNo
I have tried =IF(A1=B1="Yes", "Yes, "No") to no avail
I would like to write an If clause to do the following. If the cell is colored blue (color index 32), insert the text "ignore" in the cell
View 6 Replies View Relatedformula to find specific text from statement.
I manage to use formula find for 1 text in 1 statement, but in confuse how to get another text found if i have "8 text" to find. Generally, there will only be "1 text" for each statement.
Maybe in 1 statement there have only "IC" or "Staff Tagging" or Name" or "Product" or etc till 8.
I have created an online survey, and people choose ten words (skills) out of 24 possible. Please see screenshot. I would like a formula that does this in layman's terms: "If I see the word "Cooperation" in the source cell, then I'll put "03b" into the target cell; but if I see "Managing" in the source cell instead, I'll put "21a" in the target cell, etc."
I've tried a few IF / Then statements, with no success. Screenshot shows the source cell upper right, and the ten target cells below left with two rows of sample results. I'm guessing the same formula can be in each of the 10 target cells.
What i need it for certain colored text to appear in specific total cells.
For example; i have 38 cells in a column within these cells id like it to have black writing which i want to total up and go into a total for that color into a specific cell and say green colored text into a different total cell and red text into another total cell.
If i had for instance 6 numbers all red 6 numbers all black and 6 green id like the numbers to all be added correctly and also into color specific cells?
in excel how do I count cells that begin with specific text. Ex: in a
column with 100 entries, I want to count the number of cells that have the
letters "app" from the word approved as the first three characters in the cell
The easiest way of explaining what I'm after is to say, I have letters of the alphabet, in their own cells, and I want to find them by way of a search. I don't mind how this is done, but it would be good if for example you entered A, C and E, any cells containing those letters changed, maybe became bold, or the cell filled with colour.
View 9 Replies View RelatedI need a macro, or a formula that can identify if the words in the Words Column (Column A) is contained in Title Column (Column B). If it is, It displays as "Yes". If not, display as "No".
Case is not sensitive.
Words
Title
Displayed?
Christmas
Coworker has chronic hiccups
Yes
Excel
I Love Excel
Yes
Cartman
I Like Turtles
No
Ninja
Oh Christmas Tree
Yes
Tiger
Case of the Mondays
No
Chronic
Cute Monkeys
No
I have a spreadsheet where i would like to 'count' the number of cells with a particular colour AND SPECIFIC text (not 'any text').
I attach a xls with the initials of the person in column A, their colour as seen in cells in next four columns with the particular text in each cell. Therefore, for 'ABC1', in the given range, I would like to count how many cells have been allocated with the particular colour (brown, do not know colour index) and the particular text (1 or 2 or 4 or 5) in the range A1:CK39. Haven't supplied the actual sheet for confidentiality reasons.
Im sure this has been addressed before but i need a macro that would act like a "Contains" function. I have Column B that has user comments. These are sentences like "I have a billing issue" or "My item is damaged". My goal search these for keywords and then have a value (category) populate in Column C
Heres an example. the Category is Damaged Goods: Keywords associated with it are "broke" "broken" "replacement" "damaged" "not working"
Another category is Billing: keywords include "bill" "credit" "account"
I need a macro that will search all the comments and if "broken" (for example) is found anywhere within the comment, the value "damaged goods" will be populated in the same row, column C
In the attached sheet I need to check on the Destination in column B, and if it matches set criteria, divide the figure in Column E by 2. eg If LAX is the destination, then for any rows directly under LAX until the next destination appears, column E needs to equal column D divided by 2. If the Destination is not LAX, then Column E equals Column D.
the difficulty I am having is that there can be a variety of row numbers for each destination. I am having trouble creating a formula that can basically work backwards from Row-1 in column B until it gets to a text string, and check that text string against the criteria. so it may be row -1 up to about row -9 dependant on the number of flight times available to each destination throughout the week.
How to check if a range of cells matches specific text.
Example:
A1 - dog
B1 - cat
C1 - mouse
I want the formula to give me "yes" if dog is present.
=IF(A1="dog", "yes", "no") is for one cell. However if I do it this way:
=IF(A1:C1="dog", "yes", "no") I get an error.
Is there a way to auto-populate all of the empty cells with the word "Need to Review" in a cell range (A1:A250)? Once any of the cells in this range is populated, whatever is inputted should house the cell.
View 9 Replies View RelatedI want some VBA code that will:
1) automatically check the active row to see if it contains specific text (i dont' care if there is other stuff in the cell or cells), such as "truck 1 blahblahblah" and checks for specific font color, such as green.
2) if the row does, then I want it to copy ALL the cells in the active row EXCEPT Column A (which contains the date), and then paste them twice, one 21 rows down from the active row, and one 35 rows down from the active row.
3) Once copied and pasted, modify the pasted cells slightly. The first pasted cells need to say Truck 2 blahblahblah in Column C and be in blue font (instead of the original Truck 1 blahblahblah in Green Font), the second needs to say Truck 3 blahblahblah and be in yellow font. Everything else that was pasted will be the same EXCEPT they will be in blue or yellow font.
I'm building an inventory report based upon a daily report downloaded from a website. The downloaded report changes from day-to-day. All of the data I need remains there, but the location of the columns changes, with the exception of "BOL". I need to sort all of this data in a macro. I have most of my macro figured out, but I'm having trouble with one "sort". I need the data to be sorted FIRST by whether or not the 4th column contains "Clear" or "Dyed". I have the next two sorts already coded, based on SPOT vs Contract and then numerically by column A. But I cannot find macro coding or an excel formula (either would work) that reliably searches the 2nd column for the word "Clear". I have tried different combinations of IFERROR, FIND, SEARCH, IF, ISNUM, etc. in hopes of writing a new adjacent column containing the values "Clear" and "Dyed". I have found many combinations that work if I search only the correct cell. But when I extend the range to search through ~26 cells in one row, they all fail. Below is a (small) example of what I start with and what I want to end with. I've also included my current relevant Sorting code in my macro.
FinPro
Sup
Veh
1Dn
2Cn
2Dn
Bio
Injec
[code]....