I have a column with various values in, string and numeric. The strings I want to keep have "," in and letters one side and "space" on the other. All the cells I want cleared do not have ","
The rest of what I'm using works fine accept this line which forces an error.
[Code]....
I need some code that will clear the contents of a Row Range(C:T) if either of the contents of cells X and Y = "E"
The code needs to look at cells X17 and Y17 and continue looking until it gets to X216 and Y216
So - If X = E but Y does not, then the row range C:T must be cleared.
If Y = E but X does not, then the row range C:T must be cleared
If both X and Y = E, then the row range C:T must be cleared
If the letter E does not exist in either X or Y, then the row must be left alone
I'm trying clear the contents of a column range when the cell above this column range is empty. I know how to do this for one cell, but I would like it to work for a rangefrom R15:BB15.
If IsEmpty(Range("r15")) Then
Range("r16:r35").Select
Selection.ClearContents
End If
End Sub
I'm trying to clear cell contents based on a defined name given to a set of various cells in my worksheet. The cells are not continuous, but since they're given that defined name, I don't think it matters.
The defined name is listed as "CommentsFields".
The worksheet name is listed as "QPRForm_V6"
I found a similar thread, but cannot get it to work with what I'm looking for. I'm relatively new to writing VBA/macros, so I'm not sure what to do.
If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?
Constraint... Don't want to use VBA.
I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.
There is data(numerical) or blanks in each of the cells in the range H32:O37
I want to clear the contents if they are a duplicate of the previous line.
Looking for a macro hopefully. Found many to delete the whole row but just the specific range based upon the duplicate criteria..As there is data surronding that area do not want to delete whole row just clear that specifc area.
H32:O32 clear contents if same as H31:O31 if any valuse are different then stays the same
H33:O33 clear contents if same as H32:O32 if any valuse are different then stays the same
H34:O34 clear contents if same as H33:O33 if any valuse are different then stays the same
H35:O35 clear contents if same as H34:O34 if any valuse are different then stays the same
H36:O36 clear contents if same as H35:O35 if any valuse are different then stays the same
H37:O37 clear contents if same as H36:O36 if any valuse are different then stays the same
Been trying to work this one out and have ended up banging my head against the wall.
Basically I have a spreadsheet, in the first column is the person's name, in the secon which team they are in and following this a cell for each day of the month with their availability.
The team name is a selection from a list, the availability is 1-6 (different levels of availability)
I'm trying to do subtotals at the bottom for each separate team, so the very last row each of the cells for each is added up:
Name Team 1st 2nd 3rd 4th 5th 6th 7th etc.
Mr X ___1st___1______2__1
Mr Y ___2nd_______2________5__5__5
Mr Z ___1st___1____________3__3__3
Total 1st: 2 2 1 3 3 3
Total 2nd: 2 5 5 5
So basically the formula in the last row goes along the lines of:
Add each cell in the column IF the team name = 1st
I have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".
View 2 Replies View RelatedI am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
I have a cell A1 in sheet2 linked cell A1 in sheet1 (simply A1='sheet1'!A1). A1 in sheet1 is a data validation drop down menu.
I want to clear the content of A2 in sheet 2 everytime the content of A1 in sheet2 changes/is updated. That is everytime the value of A1 in sheet1 is changed using the drop down menu.
I tried using a Worksheet_Change event macro (which I do not fully understand) but it won't work with a cell that updates from a calculation. It also doesn't work if triggered from a cell from another worksheet (I tried linking it to cell A1 on sheet1 in this case).
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("A1")) Is Nothing Then Exit Sub
If Target.Count > 1 Then Exit Sub
Range("A2").ClearContents
End Sub
Any simple solution to clear the content of cell A2 in sheet2 when A1 in sheet2 updates?
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
I am a financial administrator & every month I have down load 4 bank accts as CSV, import into xl & code (CACode) the amounts for our accountant. I have VBA that formats, adds headings & formula etc but I have a problem/s. In H col I place CAcode & I use a sumif formula in I col to sum all the amounts with that have the same CAcode. For simplicity sake I copy the sumif down & then sort H col ascendindingly (this is done by VBA). Now I am trying write a macro to clear the contents of the cell in I col
if eg h60 = h59
then I60 clearContents, Select h59
Else select H59
Do until H3 is selected
Psuedocode
Select table (A2:I Xldown)
Sort Table by CAcode (H Col)
Set Range as H3:Xldown
Select Last cell with CAcode (Xldown) in H col
For every cell in Range (H3:Xldown)
Use If/thenIf Last cell = 2nd Last cell (H Col) then
Clear contents of I col (last row)
select 2nd Last cell (H Col)
Else 2nd Last cell (H Col)Next Cell
I have to use Xldown to select range as the range will be variable each month & for each bank acct. I need to clear contents of cell to verify that all the sub-totals of unique CAcodes of the CAcoded amounts = the totals Because I may have up to 120 rows X 3 bank accts I am slowly using vba to do my work.
Sub sort_And_delete_Sumif_amounts()
Dim r As Range
'Select range to sort
Range("A2:I98").Select
'Sort CAcode in H col ascendingly
Selection.Sort Key1:=Range("H2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
'select range for comparisomn of CAcode
Set r = Range("H3", Selection.End(xlDown))................
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
View 1 Replies View RelatedI am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
i have the following macro when cell value in column "K" changes, it distributes the data accordingly.
however, the issue is, if i change the value in K (which is a date), so another value, it leaves the distribution in tact....i want to apply "clear content" and then make the macro re-apply.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Left(Target.Address, 3) = "$K$" Then
Dim srt As String
[Code].....
My Excel Vba shown below inserts time() into a cell on my sheet. Is it possible to clear this cell if time() is already into the cell. My VBA is onky entering the time() once and not insering the current time() if a change cell values after some time i.e.
View 3 Replies View RelatedWith code I enter text by double clicking in any cell in a range.(column A,B,C are excleded)
What I need is to clear the content of the cell adjacent to the left of the one I choose to dbl click AND the one below that.
Example: I dbl click in E1 and the content of cells D1 and D2 is cleared.
I have a text file being used as a log file. Sometime I need to clear this file when I start-up the UserForm. I load this text file with this code. First is this in Module1:
Public Const FILENAME As String = "Log.txt"
Public Const LOGFILE As Integer = 1
This defines the text file to be added to. The code that actully apends the text to the first open row of the text file is: ....
I am currently working on writing a macro that clears all rows in which the cell in column F doesn't say "Sale", "Purchase", or "Tax Code Description", however, I keep receiving an error that says "Wrong number of arguments or invalid property assignment".
[Code] .....
Also, I originally was deleting the rows, but I have formula's pulling from this tab and need them to not lose their reference after the macro executes.
How can I create a msg box which ask's for Yes or no option before clearing a sheet with all contents?
if code is this:
Sub Clear_sheet()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Sheets
If Not ws.Name = "master*" Then ws.Cells.ClearContents
Next ws
End Sub
I am quite a novice with excel and I am trying to get a cell to show blank when I select a drop down list value in another cell.
Cell D2 contains a validated list containing two items (Air, Vacuum).
If I select Vacuum I wish to change another cells (D4) contents to blank, D4 is also a validated list containing three items (Yes, No, BLANK) the blank is actually a blank space and not the text blank.
I can get the cell to operate correctly but if I select Air in Cell D2 and then Yes in cell D4, but then change my mind and reset to Vacuum in cell D2 i need the cell D4 to clear its contents automatically.
I am trying to return the range of cells that is not in a range of cells.
Dim rge As range
Set rge = activewindow.visiblerange
'set rge2 = cells not in rge 'HERE IS WHERE I NEED HELP
rge2.clearcontents
I am trying to avoid a for each style loop.
i am trying to use clearcontents with the below code but i get an error,
With Sheets(1)
With .Range("J7")
.ClearContents Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
.Formula = "=H7-I7"
.AutoFill Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
End With
End With
I need to sort out the data. I have in one worksheet data arranged as
A1 B1 C1
1
2
3
4
5
6
7
8
.
.
.
In second worksheet it is arranged as
A1 B1 C1
2
3
5
8
12
15
.
.
.
I want to merge the content from first worksheet into the matching and correponding column no of second worksheet
I want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("B4") = "Basic" Then ''*** B4 is adropdown ***''
ActiveSheet.Unprotect
'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***'''
Range("B10,F10,H10").Locked = True
[Code] .....
I am looking for a way to remove text from a cell if it is 2 characters or less but do nothing if the text is longer than that. Is there a way to do this with either a function or an advanced find?
For more detail, I have a list of middle initials and last names. The cells are either a middle initial by itself like "D." or they are a last name like Jones. I want to go through and delete the cells that have the middle initial and leave the ones with the last name. So if there is a function that will evaluate the cell, and if it is 2 characters or less, then delete the contents. If greater than 3, leave it alone.
I have a range of cell content to be clear (Value only) but no formula in those cell.
The range is populated in cell H106.
Example cell
if cell H106 = D5:E102 then clear the value value only in cell range D5:E102
if cell C106 = G5:H102 then clear the value value only in cell range G5:H102.
I think I've had enough of using excel generated macro's as an excuse for decent code. I need to turn this:
Small procedure, function, what have you that will continue this pattern until I hit some kind of indicator to tell it to stop. This just clears the contents from 7 rows, hops down 9 rows and does it again.
I have a monthy activity where I would like to clear the area B13:P42 on various worksheets in the same spreadsheet. Is there an easier way to do this rather than just recording a macro?
View 5 Replies View Related