From Cell In Sheet 2 Find Name In Sheet 1 And Value Offset
Oct 4, 2008
I am using Excel 2003, Windowx XP Professional, and Internet Explorer 7
In one Excel 3003 example workbook sheet1 contains data copied in from Internet Explorer 7 that keeps changing position on the sheet. From a cell, EG C5, in sheet2 I want to use functions to find a name in Sheet1 and pull the value on the same row say seven columns to the right back into sheet2 cell C5.
My knowledge of Excel is very limited but this would seem to be a simple common thing to have to do, but have been unable figure it out. If this has been answered elsewhere I appologise, this is my first time to this forum which I found with google.
I have this code attached to a button on the first sheet of a workbook with hundreds of sheets.
it is suposed to look for a cell that contains "SAY:" and then move one column to the right and make it a zero. It works on the first sheet but not on any other sheet.
I am trying to look up a numerical value in Sheet 1 Cell:F7 and find that value in Sheet 2 Column B, then offset 29 columns in the row where the value was found. The number will not have any duplicates within Sheet 2.
using VBA and most of what i know has come from reading through blogs. I'm trying to copy 5 separate pieces of data from one row on our Payroll sheet and paste this in to another sheet call master dump.
The issue that i am having is that the code i have written keeps coming up with a run time error 1004 at the line "a.Select"
What i need the code to do is this: Copy the data from cell A4 and paste this on to another worksheet in to row cell b2, date worked in to d2, pay code in ot f2, hours in to h2 and the cost centre in to ad. all on the same row. i then need it to move on to the next team member (in this case A5) and repeat until there is no emp#. once the monday is done it will need to move onto Tuesday.
Code below.
Sub payroll_data() ' ' Payroll_data_MON Macro Dim a As Range, b As Range, c As Range, d As Range, e As Range, i As Range, j As Range, k As Range, l As Range, m As Range Set a = Range("A4") Set b = Range("I4") Set c = Range("G4") Set d = Range("H4")
I have two sheets in my workbook: One containing names with French and other European characters, the other containing a list of ISO entities for these characters, like these:
à#224 á#225 â#226 ã#227 ä#228 å#229 æ#230
I need to replace these characters in Sheet 1 with the equivalent ISO entity from Sheet2 and print the value into the same cell in Sheet1.
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData() Dim ws As Worksheet, bi As Byte, vData(1 To 1) Set ws = Sheets("A") For bi = 1 To 1 vData(bi) = Application.Choose(bi, ws.Range("A1"))
I don't know why my Sum/Offset formula is not functioning correctly. =SUM(OFFSET(Download!H2,0,MATCH($B$3,Data!A1:P1,0)))
I'm trying to attain the sum of each name from the Download sheet tab but my formula returns a 0 instead of 2,181(the correct answer). The rows on the Download sheet are varies so I thought the Offset formula would be best. Could you review my spreadsheet and formula? Can this formula accommodate an exclusion criteria? example sum all the count except for the one with the maximum time from column D?
Is there a way to get the sheet name that a particular cell is on? I know row() will find the row and column() the column, but I don't know a way to get the sheet...
What I am trying to achieve is to copy the contents of the active cell in the first sheet and find it within another sheet but I am unable to get the What:= section of the code to take the value of the copied cell.
I'm trying to find the first empty cell in a column on one sheet, then insert the value in the adjacent cell to the left into a cell on a different sheet,
I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
Macro: Copy selected cell to another sheet next blank row
I'll just make this simple to understand.
*Again, I have first sheet, named "SUMMARY" *On Column A, I have list of names A1: Star A2: Moon A3: Sun A4: Clouds *these cells corresponds to the Cells of different sheets A1: Star = E3 of Sheet 1 A2: Moon = E3 of Sheet 2 A3: Sun = E3 of Sheet 3 A4: Clouds = E3 of Sheet 4
this is what I should get:
1. I select the cell A1 as an active cell 2. press the button (with the macro on it) 3. I will automatically go to the sheet where "Star" is located
Here's another question for you excel junkies to solve, while I try to understand what y'all are doing. I have two worksheets named "MASTER" and "BEDS". What I need to do, in sheet "MASTER" is go down column ("K:K"). "K:K" has unique data in it. then for each row...
"X" .value = offset minus one "Y".value = no offset
now I need to go to sheet "BEDS" and find "Y" in column "A:A" then
from "Y" offset + 3.value = "TRUE" "Y" offset +4.value = "X"
there should only be one instance of "Y" in column "A:A"..............
I have made the macro that does as ,soon as i open the file, select today's date but only if date is in sheet5... sheet 5 is may so it works. Doing the same job for every sheet in the file.
I am working on getting a macro to find a name in column "B" and once found copy its row to another sheet. I have been working on an "IF" statement that checks for the given name and if true copies the row. I can not get it to keep checking and then stop using "loop" What i got so far:
I'm in the leadup to my A2 ICT controlled conditions piece where i have to make an Excel system. My chosen subject for this is to use the school house points system. I'm going to make a system where the results of house matches are inputted and points are awarded accordingly.
I just have a couple of queries after looking at my initial designs.
1. Is it possible to get excel to look through a sheet, find a text reference, then bring up something in a cell located in the same row? For example, for it to locate one of the House team names, then go along the row and find the ammount of house points they have in order to make a total for them. Is this also possible over a number of sheets? (In order to keep a running total on a separate sheet). E.G. House, Games Played, Wins, Losses, Draws, House Points
2. For the house cross country event they use a different system which differs from everything i have designed. What i basically need to do is be able to use a drop down against each finishing position where you can select one of the four house teams, then it takes the points won for that finishing position and puts them into a table.
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
I have a spreadsheet which is linked to other spreadsheets. When I use "find and replace" on this spreadsheet, it causes one of my linked cells to move down one row. Why does it do this? This particular cell has nothing to do with the "find and replace" option.
I have no idea how to stop this from moving this cell down.
I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A B C D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
spreadsheet 1: Lookup from Order numbers listed from A5:A177. requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2: Lookup value:Order number listed from F19:F191. Data search:AY19:CI191 return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
How would I find the first cell in column A containing a number, like HY42128PP, and then offset 1 row up from there to start my autofilter?
Also, to copy the worksheet headings, what code would copy all rows from row 1, down to 2 rows above the first cell in column A containing numbers, and insert those rows in another sheet?
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
I need to find the last value cell in a row and display its contense. Is OFFSET the best way of doing it? Cell H3 will need to contain the formula and the row to seach is also row H. In H3 I want the value that is found in the right most cell on row H that contains anything.
